![]() |
Indicator issues - Printable Version +- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb) +-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66) +--- Forum: FZ6 / Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=77) +--- Thread: Indicator issues (/showthread.php?tid=66958) |
Indicator issues - Marbro - 17-01-14 Hi guys Just wondering if you guys might be able to help with a little issue i have. My bike was laid down by the previous owner, damage not to bad. Dented tank etc. But along with that, both front indicators were missing. So i bought another set and installed them. They worked fine, but lately , they dont. Fuses are fine etc, no wiring shorts that i can find. Thing is, once i pull the fuse to check it, and place it back the indicators work again. what should i look for? Re: Indicator issues - AdieR - 17-01-14 I remember having a strange fault like this on my S2 tail lights; it turned out to be no more than a poor connection at a plug / socket. A clean up and some WD40, and all was well. Are your new indicators the same as the originals, or are they LED types? Re: Indicator issues - Marbro - 17-01-14 new generic aftermarket ones. Running normal bulbs . I imagine they would be pulling the same amps etc. I will have a look at the plug Re: Indicator issues - Ebme Geek - 18-01-14 If the only thing you disturbed was the fuse, make sure both connections are tight on the blades, also it is possible for the bridge part of the fuse to have a fracture at either end that is not obvious at first look, so don't take it for granted it is not the fuse just because it's not blown, I have had this on a car with the blade type fuses |