Rear Caliper Mounting Bolts - Printable Version +- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb) +-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66) +--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78) +--- Thread: Rear Caliper Mounting Bolts (/showthread.php?tid=64522)

Rear Caliper Mounting Bolts - Dead Eye - 18-07-13 Anyone have idea what size they are? I don't have the time to order them from the internet, so its to B&Q again to dig around in their Nuts & Bolts aisle and be confused for about a half hour  :rolleyes I think the closest match is probably M10x50mm ? Can anyone confirm? Re: Rear Caliper Mounting Bolts - His Dudeness - 18-07-13 Have a look in the repair manual. It lists the bolt sizes at the start of the manual Re: Rear Caliper Mounting Bolts - Dead Eye - 18-07-13 Are you referring to the Haynes? As that doesn't list bolt sizes, only the torque settings In any case, I popped down to my local B&Q after taking some measurements in the garage - correct size is M10x40mm but I managed to buy the wrong thread pitch Going to have to back down AGAIN and correct my mistake Re: Rear Caliper Mounting Bolts - His Dudeness - 18-07-13 The yamaha manual should have it Re: Rear Caliper Mounting Bolts - Dead Eye - 18-07-13 Ah, I've never seen that before, didn't even know it existed For anyone who stumbles on to this thread; download link is here http://foc-u.co.uk/index.php?action=downloads;sa=view;down=8 Its M10 x 1.25 x 40mm Edit: As it turns out, that size is a pain in the ass to get hold of locally eBay next day delivery job hoping that it arrives in time for me to reattach the caliper I don't suppose anyone would mind missing two bolts from their bike for an hour? haha  :lol If only Christo still lived nearby... I'd pop round and rob them  :evil