+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78)
+--- Thread: Mixture Screw Adjustment (/showthread.php?tid=63721)
Mixture Screw Adjustment - Kentish - 01-06-13
Hello All,
Do you adjust your settings by the manual ie 2.5 turns? My mate says his screws are all at different settings as the bike seems to sound better? I am nt sure about that. Shall I stick to what the manual says?
Re: Mixture Screw Adjustment - ade the blade - 01-06-13
2.5 turns normally is your starting point. you may have to fine tune them to get the response you require. with regards all at different settings etc, sound doesn`t even come into it. remember, all4 carbs are linked together and in an ideal world what one does the other 3 ideally follow. hence `carb syncing / balancing` so to sum up you are really aiming at having all 4 carbs as close as possible to their neighbour........carb #1 2 turns out, other 3 should be 2 turns out...........long winded, but hopefully helpful. oh with regards sound, the only way i know tpo alter that is to fart about with the end can in particular.....not carbs
hth. cheers Ade