+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: For Sale & Wanted (https://foc-u.co.uk/mybb/forumdisplay.php?fid=80)
+--- Thread: new/old stock titanium can and stainless link pipe (/showthread.php?tid=60951)
new/old stock titanium can and stainless link pipe - ogri48 - 16-11-12
bought of e bay last week for 160 posted new/old stock with a few tiny display marks(none on the show side), fitted for fifteen minutes before i decided i didnt like it as its too small and modern looking and i wanted more of an old school look like my older "same size as stock"stainless micron set up. runs perfectly on standard jetting due to link pipe bore reduced from 65 to 50 i think. i also shortened the link pipe by fifteen mil where it goes into the can as it didnt sit far enough forward into the strap for my liking.good quality stainless mikalor clips supplied but could have been a bit smaller (supplied were55-59 and63-68 but 52-55 and 60-63 would have been better) so put a few more slots in spigot behind clamp to get a seal. has a removable DB killer for mots, but you wouldnt use it, its not loud without just a nice low burble. v. cheap set up for somebody here before it goes on fleabay £90 collected, £100 posted. tried to show marks in photos but they are minimal
Re: new/old stock titanium can and stainless link pipe - ogri48 - 16-11-12
Re: new/old stock titanium can and stainless link pipe - ogri48 - 16-11-12
and now i keep getting the protocal error thing..
Re: new/old stock titanium can and stainless link pipe - ogri48 - 16-11-12
though i did manage to post the same blurry photo twice.. :'(
Re: new/old stock titanium can and stainless link pipe - ogri48 - 16-11-12
Re: new/old stock titanium can and stainless link pipe - ogri48 - 16-11-12
Re: new/old stock titanium can and stainless link pipe - ogri48 - 16-11-12
Re: new/old stock titanium can and stainless link pipe - ogri48 - 16-11-12
an its for a gen 1 fazer thou..
Re: new/old stock titanium can and stainless link pipe - ogri48 - 18-11-12
been in touch with the supplier, hes sending me two new s/s mikalor clips the right size along with a bespoke strap fabricated to exact can circumference as the umbiquitous one he sent isnt a particularly good fit, and needs a spacer. as requested via pms, a photo of the system loose fitted on the bike.. not done up or anything just sat on so you get an idea of how it looks relative to the bike.
leaving it here a little longer but its going on ebay tonight along with the other bits ive got
atb
paul
Re: new/old stock titanium can and stainless link pipe - ogri48 - 18-11-12
and the reason i dont want it, i prefer the bigger, old school look of me earlier stainless system..
Re: new/old stock titanium can and stainless link pipe - ogri48 - 18-11-12
now on ebay..or it was, left it on for a day and thought bugger that, with the charges etc iut'll cost me twenty quid to sell it cheap! so took it off and gonna keep it/use it until i re jet the bike in spring then stick it on here for a bit less when i fit the bigger bored system. Makes sense to get a bit of use out of it and it runs really well on a stock bike so thats the way forward i guess....got the new clips and strap now and it all fits a lot better