?? two connectors with the bridging wire ??

?? two connectors with the bridging wire ?? - Printable Version

+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: ?? two connectors with the bridging wire ?? (/showthread.php?tid=60829)

?? two connectors with the bridging wire ?? - greatfun - 04-11-12

Hello Could some tell me what these two connectors with the bridging wire are used for please :rolleyes and the third also please :rolleyes
Apologies if this has been answered before. :eek
Cheers in advance Smile

Craig

Re: ?? two connectors with the bridging wire ?? - tomlinscote - 04-11-12

Alarm connections would be a good bet.
See post by Devilsyam on page 2 Smile

Re: ?? two connectors with the bridging wire ?? - greatfun - 04-11-12

Cheers for that P, looks like some nicked my alarm as well LOL :eek !!!!!
Craig

Re: ?? two connectors with the bridging wire ?? - FuZzBoM - 04-11-12

Yeah its for the alarm. one is for immobiliser and the other with 4 wires controls the indicators flashing for the alarm. the last one with no loop on it is a line to the ignition switch as well as a perm live.
I have wired my own alarm to these.. 8)

Re: ?? two connectors with the bridging wire ?? - unfazed - 05-11-12

Yes it is the loom for the yamaha alarm system. if you pull out the plugs the bike will not start.
One disables the starter circuit and the other disables the CDI circuit.

Re: ?? two connectors with the bridging wire ?? - MadDogMcQ - 05-11-12

(04-11-12, 11:29 PM)FuZzBoM link Wrote: ...the last one with no loop on it is a line to the ignition switch as well as a perm live.
I have wired my own alarm to these.. 8)

Just to point out that this should not be used as an ignition-switched supply for accessories such as satnav that require a supply whilst on the move.

SEE THIS

Re: ?? two connectors with the bridging wire ?? - sadlonelygit - 05-11-12

it's for the flux capacitor stupid..............kids these days tsk!!

Re: ?? two connectors with the bridging wire ?? - FuZzBoM - 05-11-12

(05-11-12, 09:26 AM)MadDogMcQ link Wrote: [quote author=FuZzBoM link=topic=5196.msg45084#msg45084 date=1352068146]...the last one with no loop on it is a line to the ignition switch as well as a perm live.
I have wired my own alarm to these.. 8)

Just to point out that this should not be used as an ignition-switched supply for accessories such as satnav that require a supply whilst on the move.

SEE THIS
[/quote]

yeah should have said sorry. my satnav is switched from that but i run that to a relay from the battery.

Re: ?? two connectors with the bridging wire ?? - unfazed - 05-11-12

Sadlonelygit:
How could you make that mistake - It's the secondary bypass EPS conduit

Re: ?? two connectors with the bridging wire ?? - fireblake - 05-11-12

I always wondered what they were but was afraid to ask?

Re: ?? two connectors with the bridging wire ?? - greatfun - 06-11-12

(05-11-12, 10:28 PM)fireblake link Wrote: I always wondered what they were but was afraid to ask?

Me too but I had to know :rollin