+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: FZ6 / Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=77)
+--- Thread: Anyone got photos of an S2 swingarm? (/showthread.php?tid=60348)
Anyone got photos of an S2 swingarm? - AdieR - 22-09-12
My bike just got decked by a car at work (6 months after being decked by a van; I'm not having much success with this bike...), RHS of swingarm has a bend which isn't in the LHS and there appears to be confusion as to whether that bend is meant to be there (I'm bloody sure it wasn't bent before).
Cheers.
Re: Anyone got photos of an S2 swingarm? - solorider - 23-09-12
if you need a new arm there is one on ebay http://www.ebay.co.uk/itm/BRAND-NEW-GENUINE-YAMAHA-FZ6-06-REAR-SWING-ARM-IN-BLACK-RRP-450-NOW-100-POST-/190631863338?pt=UK_Motorcycle_Parts&hash=item2c628b642a but here is a pic of the arm from the top on ebay http://www.ebay.co.uk/itm/Yamaha-FZ6-FZ-6-FZ-6-Fazer-600-S2-08-Rear-Swinging-Arm-Read-Description-/160887965976?pt=UK_Motorcycle_Parts&hash=item2575ab8918
Re: Anyone got photos of an S2 swingarm? - AdieR - 24-09-12
Nice one Solorider, cheers. Looking at that, mine might not be as bad as I thought.
Apparently the garage have ordered a swingarm and hugger as part of the ins quote anyway - hugger is split and swingarm is quite deeply scratched and marked anyway.
Re: Anyone got photos of an S2 swingarm? - Grahamm - 24-09-12
(24-09-12, 02:31 AM)AdieR link Wrote: Apparently the garage have ordered a swingarm and hugger as part of the ins quote anyway - hugger is split and swingarm is quite deeply scratched and marked anyway.
In which case I'd take the swap. It might be alright, it might not, but personally I'd prefer not to take the chance of the rear end suddenly giving way! :eek
Re: Anyone got photos of an S2 swingarm? - AdieR - 24-09-12
That's precisely what went through my mind Grahamm - when I looked at in daylight (it were dark when it got banged), the usual surface dirt / marks laid by the hugger position seemed out to the RHS by 3-4mm (not much, but enough to be a concern), coupled with an obvious rear-end twist (looking at the back of the bike, lowish down, the pillion pegs were obviously out of sync) - again, in the dark, I put it down to possible subframe damage initially until I saw the swingarm in daylight.
It's currently in my usual bike shop (and they're pretty good, what they don't know about bikes isn't worth knowing), they reckoned it maybe looks worse than it actually is.