+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: General (https://foc-u.co.uk/mybb/forumdisplay.php?fid=65)
+--- Forum: Introduction (https://foc-u.co.uk/mybb/forumdisplay.php?fid=68)
+--- Thread: Born again biker ! (/showthread.php?tid=59939)
Born again biker ! - 8ball88 - 20-08-12
Hi all
Back into biking 15 years after selling my 1994 CB500 twin.
Spent a couple of months reading the posts on here and magazine reviews and narrowed it down to the Hornet or
Fazer.
The Fazers looks and tank range swung it. Finally found a 2002 FoxEye in yellow from a dealer with FSH and 18k
for just over 2k - perfect.
The downpipes and collector box appeared to be in good shape, however after 3 months and some spirited! riding
the collector box blew a nice big hole.
More reading of the posts on here followed and a set of Delkevic stainless downpipes ordered from Ebay ...
(http://www.ebay.co.uk/itm/270998876733)
...now they have another set which slightly more expensive and comes with the balance pipes so contacted
'Delkevic' and was advised that they have just updated the design and if I ordered the cheaper ones, I would get
sent the revised design anyway.
So fair play to them and they arrived next day !! (http://www.ebay.co.uk/itm/290760812562)
Also ordered new stainless dome nuts which are perfect ...http://www.ebay.co.uk/itm/180914741372
Local dealer couldnt fit them for two weeks, so after 3 days prepping the header nuts with WD40, as suggested on
here, and being no mechanic, yesterday I plucked up the courage to have a go at fitting. The header nuts came
off surprisingly a lot easier than I'd have thought and confirms that the previous owner had looked after the
yellow peril.
Plenty of coffee breaks and relatively few swear words later it all lined up perfectly and is now running sweet.
Tip1 - make sure you push the collar (flange?) on cylinder 2 past the frame before lining it all up !!
Tip2 - the socket wont go past the frame when tightening the bottom nut on cyl 2 either so stick the socket on
the nut before threading the extension bar through !!
Next job, fender extender to protect them.
Some before and after photos...thanks to the previous posters of all the threads that I read !!
Cheers Neil.
Re: Born again biker ! - manuel32 - 20-08-12
very nice, better if you do it yourself,well done
Re: Born again biker ! - JZS 600 - 20-08-12
Good job man!
Re: Born again biker ! - noggythenog - 20-08-12
Nice one neil,
Was just looking at those downpipes online earlier,shall treat myself soon,
Good to know they went on with minimal hassle
Glad your enjoying the bike,looks good,
Like a friendly wasp!
Re: Born again biker ! - harry69koi - 21-08-12
Big improvement on the black headers m8ty,well done
Re: Born again biker ! - Khaotik - 21-08-12
I've always loved the yellow ones.
Re: Born again biker ! - 8ball88 - 21-08-12
Thanks for the comments. I originally wanted a blue FoxEye but there weren't any good ones around, and so glad I got the yellow bike now as it really stands out. There's no noticeable power increase that I can tell after fitting the pipes, I guess it would have to be dynoed to find out if it's running above stock.
Cheers Neil.
Re: Born again biker ! - D4Delta - 29-08-12
Nice looking bike. Much more satisfaction if you can do the job yourself as well as saving the pennies. Happy biking.
Re: Born again biker ! - budgiemurray - 30-08-12
Yep like the yellow myself.. Rather nice
Budgie
Sent from my GT-I9100 using Tapatalk 2