+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: loss of power (/showthread.php?tid=59619)
loss of power - alan09 - 23-07-12
its only happened twice but in the last week ive had a loss of power both times it was in 4th or 5th gear while givin it abit of a handfull. when i say loss of power i mean a split second loss, in the blink of an eye the power goes & comes back, it happens so quickly i dont even get chance to back the throttle off. but i can physically feel the front of the bike dive at the front, apart from that the bike runs sweet as a nut, starts first every time.its 51 gen 1, done 26k miles & ivanised by mike in 2010.
Re: loss of power - AdieR - 24-07-12
Any particular pattern (hot / cold / particular rpm)? Any recent work / service history?
First thing I would do is check the plugs - their state will give some insight.
Re: loss of power - Rustyz nutzz - 24-07-12
Too rich at a guess , but need more info
Re: loss of power - Falcon 269 - 24-07-12
Need more info on revs/throttle position, Alan.
When was it last serviced? EXUP? Done anything else to it recently? Changed anything?
Re: loss of power - alan09 - 24-07-12
thanks for the replys they're much appreciated, i think the power loss occured in 4th gear around 7k- 8k rpm so today i took it to 9k rpm in 4th gear without any problems at all "smooth as ever"
so the problem whatever it is is intermittent. i service the ex-up twice a year, only did it last week, it was free & easy just as it should be. As for the the plugs :o , i bought an AIS kit off justy & was going to replace plugs when i removed the AIS, just haven't got round to it yet, so ive had the bike 3 years come november so god knows how long those plugs have been in. i hope the above will help, obviously i need to get the plugs replaced, i'm off work for a couple of weeks i'll put it top of my "to do" list.......thanks Alan.