+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: Buzzing fairing insert (/showthread.php?tid=59374)
Buzzing fairing insert - dazza - 04-07-12
Hello peeps, my bike has started to develop an annoying vibration from the r/h/s fairing insert between 3.5 &4.5k revs. I noticed it did not have a rubber washer on the top mount and could only find a thick tap washer but this hasn't cured it. I'm sure there are plenty of you who have had this problem and am curious as to how you have solved it. All replies appreciated chaps......and chappettes
Re: Buzzing fairing insert - solorider - 04-07-12
mine does it but if i move the clocks slightly the noise goes
Re: Buzzing fairing insert - chitsu - 04-07-12
If you remove the infills you SHOULD see some slight chaffing marks on the inside of the fairing, I fit felt tape to the area where it is marked. I also put a little more on the areas of the clear silicone tape & sponge originally fitted at the factory, which will have no doubt gone off by now.
Re: Buzzing fairing insert - BMCfaz - 05-07-12
I put a line of silicon sealer along the edge of the inners, cures the problem straight away... well, once it's dried!
Re: Buzzing fairing insert - ZiggyCol - 06-07-12
I cut up an old cycle inner tube and glued strips to the edge of the infil panels
Re: Buzzing fairing insert - eddie - 06-07-12
ear plugs ...simples
Re: Buzzing fairing insert - dazza - 06-07-12
Eddie, you're a genius. I think I may have cracked it :lol
Re: Buzzing fairing insert - fireblake - 06-07-12
I can see your problem, All yellow ones do that?
Re: Buzzing fairing insert - eddie - 07-07-12
:lol :lol :lol :lol :lol
Re: Buzzing fairing insert - Rustyz nutzz - 11-07-12
Double sided tape works well....
Till it rains lols. slicone is better as already said.