Fazer Owners Club - Unofficial
Delkevic end can - Printable Version

+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78)
+--- Thread: Delkevic end can (/showthread.php?tid=56731)

Delkevic end can - Fazerjon - 08-12-11

Can anyone recommend the Delkevic end can, it looks the nuts on the internet pics! Is it loud? Is the build quality any good? Is it still in good condition after a few wet rides? Ive just seen them on ebay for £119.99 with the link pipe, and that seems a fair price including 12 months warranty.
My finger is hovvering above the 'BUY IT NOW' button!!!! Tell me its worth getting.... Big Grin

Re: Delkevic end can - steeeve66 - 08-12-11

i fitted one (stainless steel) to my CB500 which i use every day (every week day that is) commuting in to work, 25miles each way, in all weathers - in two years it's still looks as new bar all the minor dings and scratches you'd normally associate with a bun-fight across-london commute.

I keep the baffle in - loud enough for traffic to hear you coming but not offensive.

Re: Delkevic end can - Captain Haddock - 08-12-11

I fitted one to my fazer a few weeks ago, sounds good with the baffle out and looks good, not done any wet rides though.
Quality looks good to me and fitted nicely, feels a bit quicker on pickup too.


Re: Delkevic end can - keno - 08-12-11

Fitted one of them to my bike in april after my bike was kindly wrote off by a blind twat in a car.
Anyway got the bike back and fixed all that needed doing including the exhaust and linky,the delkavic is pretty loud with a nice rumble,mine pops and bangs on the overrun but you get used to it dont know if anyone elses does that but its quite normal with the stubby can,can and linky still look spanking and i use the bike in all weathers all year round.


Hope that helps.[Image: IMG20110818_006_edit.jpg][/img][Image: IMG20110818_006_edit.jpg][/img]


Me bike now




[url=http://foc-u.co.uk/ftp:/[Image: IMG20110818_006_edit.jpg]]ftp:/[Image: IMG20110818_006_edit.jpg]

Re: Delkevic end can - sicknote - 08-12-11

Recently fitted the delc oval stainless end can.
It looks really nice on the bike, well made, light. fits OK
Sounds about right with the DB killer, without it is a race can, too much really.
i too noticed the burbling on decelleration, more so without the killer.
Recommend Smile



Re: Delkevic end can - Fazerjon - 08-12-11

Cheers for the info and pics, you've sold it to me!!! :lol

Re: Delkevic end can - sicknote - 09-12-11

I found my fzs required a 20mm or so spacer on the rear hanger to get the delc can to sit right, < u can see in pic >
otherwise it would clout the tyre on suspension compression.such a thing maybe included with brand new silencer,
i got mine S/H so wouldn't know.


Re: Delkevic end can - donkey93 - 09-12-11

i love that pic keno the bike looks great

Re: Delkevic end can - samberking - 09-12-11

Are they easy to fit? Ive never fit one before but I was going to give it a go if it was easy. Smile

Re: Delkevic end can - scottyboy2203 - 10-12-11

bit of a noob question but does the bike need the carbs adjusting/rejetting etc with a new exhaust like this?

Re: Delkevic end can - topgun44 - 10-12-11

(09-12-11, 09:00 PM)samberking link Wrote: Are they easy to fit? Ive never fit one before but I was going to give it a go if it was easy. Smile
yes just one clamp and one bolt took me about 20 mins  Wink

Re: Delkevic end can - topgun44 - 10-12-11

(10-12-11, 12:25 AM)scottyboy2203 link Wrote: bit of a noob question but does the bike need the carbs adjusting/rejetting etc with a new exhaust like this?
nope fazer run a bit rich so it will not need anything adjusting but i would if you can buy k&n air filters  which make it feels bit sharper  Wink 

Re: Delkevic end can - samberking - 10-12-11

thanks topgun

Re: Delkevic end can - topgun44 - 10-12-11

(10-12-11, 03:46 PM)samberking link Wrote: thanks topgun
Have good one mate  Wink

Re: Delkevic end can - Fazerjon - 24-12-11

Just fitted my can, looks and sounds superb but I did have to put a 10mm spacer between the clamp and the rear footrest hanger mounting bracket.  :b

Re: Delkevic end can - keno - 25-12-11

Quote:nope fazer run a bit rich so it will not need anything adjusting


think that should be a bit lean.. :rolleyes

Re: Delkevic end can - keno - 25-12-11

Quote:i love that pic keno the bike looks great


Looks a lot better than it did after the crash...... :lol

Re: Delkevic end can - topgun44 - 25-12-11

(25-12-11, 01:46 PM)keno link Wrote:
Quote:nope fazer run a bit rich so it will not need anything adjusting


think that should be a bit lean.. :rolleyes
Lean or rich still mean the same  :eek

Re: Delkevic end can - keno - 25-12-11

Fazer will only run rich if you have been messing with the mixture it runs lean from the factory even more so if a k&n filter is used.... :lol

Re: Delkevic end can - topgun44 - 26-12-11

(25-12-11, 08:36 PM)keno link Wrote: Fazer will only run rich if you have been messing with the mixture it runs lean from the factory even more so if a k&n filter is used.... :lol
as i say rich lean  still the same  :eek :rollin