+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78)
+--- Thread: Switched Electrical Take-off on "02" Foxeye (/showthread.php?tid=56035)
Switched Electrical Take-off on "02" Foxeye - jrisch - 02-10-11
Hiya, I want to install a power lead for my satnav, preferably so only live when the ignition is on. Any suggestions as to where the easiest point is to attach the lead to?
Cheers, J
Re: Switched Electrical Take-off on "02" Foxeye - Skippernick - 02-10-11
Hi there,
Not saying its easy but the only one i know of is the fuse box under the seat to the rear of the battery.
I soldered the live for my heated grips to the common live bus bar having removed it from the casing.
There are pictures on the old site in the installing heated grips section, should be able to find it from this site.
Hope this helps.
Re: Switched Electrical Take-off on "02" Foxeye - jrisch - 03-10-11
Great, thanks, I'll do a search over there.
Cheers, J
Re: Switched Electrical Take-off on "02" Foxeye - Aegis Bearing Mel - 03-10-11
No need to search buddy, it's up the top of the screen under articles>for any bike.
Or here too.
Re: Switched Electrical Take-off on "02" Foxeye - Major Rant - 04-10-11
There's one on the "Alarm" connector block under the seat. Labelled as the 4th from the bottom on the diagram.
Connects to the "Turn" fused 12V line.
I've never used it so I've no idea where it physically is, you'll have to fish around with a meter.
I have connected to the unswitched 12V on that block and it needed a very small spade connector.
Re: Switched Electrical Take-off on "02" Foxeye - jrisch - 04-10-11
Thanks, guys, your help is much appreciated.
Cheers, J