+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: Link Pipe fazer 1000 Gen1 (/showthread.php?tid=55884)
Link Pipe fazer 1000 Gen1 - karlo - 13-09-11
I got a used link pipe of ebay to fit my scorpion can, It has obviously been fitted with exhaust paste previously, but it isn't slotted like the oe pipe?.
looking around I can't see any that come slotted, Must be someone who has come across this before how on earth do they clamp up?
![[Image: e10542.gif]](http://209.85.48.22/9054/62/0/e10542//e10542.gif)
Re: Link Pipe fazer 1000 Gen1 - Red Ceri - 20-09-11
My Scorpion link pipe is a tight fit over the collector/exup part of the original exhaust and does not need a clamp and does not leak even without any exhaust paste.
Re: Link Pipe fazer 1000 Gen1 - karlo - 20-09-11
Well mine wasn't as tight as I would have liked so I slotted it to be on the safe side, all fitted and a 100 mile road test :rollin
Re: Link Pipe fazer 1000 Gen1 - pinkbikerfzs1 - 01-10-11
Yup, my Scorpion link pipe was a tight push fit on the collector box end, never had problems with it, if its a bit loose, put some exhaust paste on before attaching it, the silencer and its bracket will hold it in place. When i changed to a MIVV can, the link pipe did have clamps both ends. If you're not happy, you could always cut a couple of slots and fit a clamp..
Re: Link Pipe fazer 1000 Gen1 - karlo - 01-10-11
(20-09-11, 09:06 AM)karlo link Wrote: Well mine wasn't as tight as I would have liked so I slotted it to be on the safe side, all fitted and a 100 mile road test :rollin