![]() |
Speed - Printable Version +- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb) +-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66) +--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78) +--- Thread: Speed (/showthread.php?tid=65960) |
Re: Speed - darrsi - 21-10-13 (21-10-13, 11:18 AM)Dead Eye link Wrote: I think its there more for consistency - besides, there may be other bikes that the gearing also represents which have the extra power to achieve such a figure? Don't forget the added turbo and the 1:3 gradient down hill as well :lol Re: Speed - fazersharp - 21-10-13 also dont forget the wind - because at 12,500 rpm and 155mph I will be making quite a lot of it ! Re: Speed - Dead Eye - 21-10-13 Wind and gradient don't make a different to gearning ratios... they make a difference to the maximum speed achievable under those conditions as they are a function of power, but it won't affect the RPM for a given Speed and Gear Re: Speed - Mark YPVS - 21-10-13 I have seen on the speedo just under 150 mph on the 600 so about about 135 mph true speed, i dont think a half faired 600 would pull a true 155 mph ( did get 168 mph on my R6 speedo reading ( 1999 model) :evil Mark ![]() Re: Speed - darrsi - 21-10-13 (21-10-13, 12:32 PM)Mark YPVS link Wrote: I have seen on the speedo just under 150 mph on the 600 so about about 135 mph true speed, i dont think a half faired 600 would pull a true 155 mph ( did get 168 mph on my R6 speedo reading ( 1999 model) :evil I've had 135mph with a passenger on as well, and if it wasn't for a pesky car changing lanes about a third of a mile up ahead i'd have gone quicker. Bloody thoughtless these car drivers. :lol Re: Speed - Mark YPVS - 21-10-13 i find the ones with blue lights the worst, i had to ride on the pavement for several miles til i lost him :evil :evil Mark ![]() Re: Speed - darrsi - 21-10-13 (21-10-13, 01:48 PM)Mark YPVS link Wrote: i find the ones with blue lights the worst, i had to ride on the pavement for several miles til i lost him :evil :evil I know the one's you mean, they make a right racket........ Re: Speed - fazersharp - 21-10-13 (21-10-13, 12:16 PM)fazersharp link Wrote: also dont forget the wind - because at 12,500 rpm and 155mph I will be making quite a lot of it ! (21-10-13, 12:20 PM)Dead Eye link Wrote: Wind and gradient don't make a different to gearning ratios... they make a difference to the maximum speed achievable under those conditions as they are a function of power, but it won't affect the RPM for a given Speed and GearOh dear let me do it again and now put one of these at the end of it :rollin also dont forget the wind - because at 12,500 rpm and 155mph I will be making quite a lot of it ! :rollin (now do you get it) Re: Speed - darrsi - 21-10-13 (21-10-13, 07:16 PM)fazersharp link Wrote: [quote author=fazersharp link=topic=10346.msg108535#msg108535 date=1382354160] (21-10-13, 12:20 PM)Dead Eye link Wrote: Wind and gradient don't make a different to gearning ratios... they make a difference to the maximum speed achievable under those conditions as they are a function of power, but it won't affect the RPM for a given Speed and GearOh dear let me do it again and now put one of these at the end of it :rollin also dont forget the wind - because at 12,500 rpm and 155mph I will be making quite a lot of it ! :rollin (now do you get it) [/quote] I'll get your coat......... :lol Re: Speed - Dead Eye - 21-10-13 Yeah, I'm not good at judging internet humour unfortunately... sorry ![]() I will generally always go with "There is no accounting for human stupidity" and just assume the worse case scenario ![]() Re: Speed - darrsi - 22-10-13 (21-10-13, 10:53 PM)Dead Eye link Wrote: Yeah, I'm not good at judging internet humour unfortunately... sorry "And here i present.......the DIY Sander Carb Cleaner" :pokefun ![]() ![]() ![]() Re: Speed - darrsi - 22-10-13 I have the memory of a mouse that's been focced by an elephant................sorry Dead Eye ![]() Re: Speed - midden - 22-10-13 (18-10-13, 09:46 AM)fazersharp link Wrote: If you were in 1st at 10,000 revs then its no wonder you crashed.I can say from unwanted one time experience those kind of revs puts out an outrageously loud bang :rolleyes :o [size=78%] [/size] Re: Speed - richfzs - 22-10-13 Not on my bike, it doesn't! Re: Speed - Dead Eye - 22-10-13 (22-10-13, 12:43 AM)darrsi link Wrote: [quote author=Dead Eye link=topic=10346.msg108610#msg108610 date=1382392424] "And here i present.......the DIY Sander Carb Cleaner" :pokefun ![]() ![]() ![]() [/quote] Ssshhh... no one else needs know that this ever happened... none of the new guys will ever take me seriously :lol Re: Speed - darrsi - 22-10-13 (22-10-13, 09:01 AM)Dead Eye link Wrote: [quote author=darrsi link=topic=10346.msg108618#msg108618 date=1382399003] "And here i present.......the DIY Sander Carb Cleaner" :pokefun ![]() ![]() ![]() [/quote] Ssshhh... no one else needs know that this ever happened... none of the new guys will ever take me seriously :lol [/quote] Only kidding matey ![]() Re: Speed - midden - 22-10-13 (22-10-13, 08:26 AM)richfzs link Wrote: Not on my bike, it doesn't!Sorry to hear that, put it down to rider error Re: Speed - JoeRock - 22-10-13 Why on earth wouldn't you be able to hit 10k revs in first? The red line isn't until 12,500! Re: Speed - darrsi - 22-10-13 (22-10-13, 02:40 PM)JoeRock link Wrote: Why on earth wouldn't you be able to hit 10k revs in first? The red line isn't until 12,500! They do it quite comfortably, and beyond! Re: Speed - richfzs - 22-10-13 Think I might have been misunderstood - my bike does indeed quite happily do 10k rpm, and beyond... What it doesn’t do, is make a huge clunk, or outrageously loud bang, when I shift from 1st to 2nd. Any rider error involved, is not on my part.... |