![]() |
Moto laid on the floor - Starting issues - Printable Version +- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb) +-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66) +--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78) +--- Thread: Moto laid on the floor - Starting issues (/showthread.php?tid=75844) Pages:
1
2
|
Re: Moto laid on the floor - Starting issues - darrsi - 13-06-16 Best when the engine is cool too. Re: Moto laid on the floor - Starting issues - xthib1 - 14-06-16 Ok, so nothing to take apart then? I just go to the engine, find the screws, unscrew them, let the fuel come off and screw them back, right? Re: Moto laid on the floor - Starting issues - darrsi - 14-06-16 (14-06-16, 01:22 AM)xthib1 link Wrote: Ok, so nothing to take apart then? I just go to the engine, find the screws, unscrew them, let the fuel come off and screw them back, right? Basically yeah. Put a rag or something else to soak up or redirect the fuel away from the engine if possible. It's not a lot of fuel, we're only looking at roughly an egg cup full each time. I'll warn you again though, use a proper fitting screwdriver and go easy on them, do not try and bodge it, otherwise it will all get a bit messy. Re: Moto laid on the floor - Starting issues - xthib1 - 15-06-16 Cheers Darrsi :thumbup One more question though: I am servicing the bike and since the starting issue might come from blocked jet I was wondering whether it would be a good idea to clean the tank? However I don't know how to do that, any tips?? Re: Moto laid on the floor - Starting issues - xthib1 - 26-06-16 So, in the end I did flush the float bowls and look what I found: Now it starts on the button, just need to blip the throttle a few times and that's all. ![]() Thanks to everybody ! Re: Moto laid on the floor - Starting issues - slappy - 26-06-16 :thumbup, probably bits of crap on bottom of petrol tank that got disturbed when the bike went over. |