+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78)
+--- Thread: Clicking sound when cold (/showthread.php?tid=60308)
Pages:
1
2
Re: Clicking sound when cold - His Dudeness - 16-10-15
(15-10-15, 04:00 PM)Bretty link Wrote: What does the can chain rattle against?It's doesn't rattle against anything. If the tensioner is at its limit you'll have a slack chain spinning at up to 15000 rpm so it's going to make a bit of a racket.
The only metal-on-metal is between the chain and sprockets. All the guides are plastic. No?
My bike developed a bit of a rattle but it was actually one of the exhaust manifolds coming loose, making that cylinder particularly load with a tick/rattle, worth checking maybe?
Brett
Re: Clicking sound when cold - anutz - 01-11-15
hows the bike OP, my chain was rattling a while back and after a few hundred miles its is ok, but i knew it was the adjuster as i had just put in a new tensioner gasket i forgot about when i re-built the head, so the adjust was a fraction off clicking....now its clicked and its silent
Re: Clicking sound when cold - darrsi - 01-11-15
(01-11-15, 06:53 PM)anutz link Wrote: hows the bike OP, my chain was rattling a while back and after a few hundred miles its is ok, but i knew it was the adjuster as i had just put in a new tensioner gasket i forgot about when i re-built the head, so the adjust was a fraction off clicking....now its clicked and its silent
This post was 3 years ago!
Re: Clicking sound when cold - anutz - 01-11-15
er.....no idea why i did not see that.....maybe i should stop using the delorian to go to work