Author Topic: what did you do with your fazer today ? (Read 1698289 times)

Hedgetrimmer · « **Reply #4950 on:** 14 August 2015, 09:27:56 pm »

Quote from: devilsyam on 14 August 2015, 08:18:59 pm

I'll get the rescue van ready

Hmmm...

Can you fit a bed in that van?

Devilsyam Support Crew for the Nick Crisp Long Way Round (Wales) adventure tour - MacGregor and Boorman eat your hearts out

noggythenog · « **Reply #4951 on:** 14 August 2015, 09:37:45 pm »

Quote from: nick crisp on 14 August 2015, 09:27:56 pm

Quote from: devilsyam on 14 August 2015, 08:18:59 pm
I'll get the rescue van ready

Hmmm...

Can you fit a bed in that van?

Devilsyam Support Crew for the Nick Crisp Long Way Round (Wales) adventure tour - MacGregor and Boorman eat your hearts out

Sorry...Wales is now closed....im working

Hedgetrimmer · « **Reply #4952 on:** 14 August 2015, 09:42:54 pm »

4 days of fine Welsh roads with good weather Noggy. Wish you were here?

noggythenog · « **Reply #4953 on:** 14 August 2015, 09:47:32 pm »

Quote from: nick crisp on 14 August 2015, 09:42:54 pm

4 days of fine Welsh roads with good weather Noggy. Wish you were here?

What is this mythical dry place called Wales

I will be saying my ~~rain dance~~ prayers for you

slimwilly · « **Reply #4954 on:** 14 August 2015, 10:14:47 pm »

Quote from: devilsyam on 14 August 2015, 08:18:59 pm

I'll get the rescue van ready

hahahahahaha,, Luke you made me spit my cider out,,,brilliant

Fazerider · « **Reply #4955 on:** 15 August 2015, 09:15:04 am »

Took another picture of the clocks.

fazerscotty · « **Reply #4956 on:** 15 August 2015, 11:38:54 am »

Washed it ready to go to the Raven in the morning for breakfast.

CharlieDee · « **Reply #4957 on:** 15 August 2015, 06:17:29 pm »

Well I've fitted and modded the following on my gen2 today... PCV, lars air box mod, O2 optimiser, copperdawgs flies, blocked AIS and k&n... And she pulls like a train.... Now need some dyno time... Booked in for next Saturday... Happy days!!

noggythenog · « **Reply #4958 on:** 15 August 2015, 08:29:12 pm »

Quote from: youngsterbiker on 14 August 2015, 08:48:15 pm

Went on a 950 mile journey around north west scotland, came home and the next day accompanied andrew lawsons family home.
If you dident know, he was a road bike racer who dies in ireland last week. Very emotional ride.

well done mate, good support and allot of miles

noggythenog · « **Reply #4959 on:** 15 August 2015, 08:30:32 pm »

Quote from: CharlieDee on 15 August 2015, 06:17:29 pm

Well I've fitted and modded the following on my gen2 today... PCV, lars air box mod, O2 optimiser, copperdawgs flies, blocked AIS and k&n... And she pulls like a train.... Now need some dyno time... Booked in for next Saturday... Happy days!!

thought youd be happy

....how did you get the old flies off???...think I mushed a couple of my screws and then I gave up $:\$

what map are you running on the PC5 at the moment?

pilninggas · « **Reply #4960 on:** 15 August 2015, 08:45:25 pm »

Rode up the Pico Veleta in the Sierra Nevada. Its closef to motor vehicles at 8500ft which is a shame. But wow what a road - as good at Monte Giovo and Gavia.

Also the Alcataz to Albacete road; sensational.

Grayo · « **Reply #4961 on:** 15 August 2015, 09:05:39 pm »

Quote from: noggythenog on 15 August 2015, 08:30:32 pm

Quote from: CharlieDee on 15 August 2015, 06:17:29 pm
Well I've fitted and modded the following on my gen2 today... PCV, lars air box mod, O2 optimiser, copperdawgs flies, blocked AIS and k&n... And she pulls like a train.... Now need some dyno time... Booked in for next Saturday... Happy days!!

how did you get the old flies off???...think I mushed a couple of my screws and then I gave up $:\$

Easy enough if you heat the screws up before trying to undo them as they're held in with threadlock. I did mine today. Heated the screws up with a soldering iron.

noggythenog · « **Reply #4962 on:** 15 August 2015, 10:03:46 pm »

Quote from: Grayo on 15 August 2015, 09:05:39 pm

Quote from: noggythenog on 15 August 2015, 08:30:32 pm
Quote from: CharlieDee on 15 August 2015, 06:17:29 pm
Well I've fitted and modded the following on my gen2 today... PCV, lars air box mod, O2 optimiser, copperdawgs flies, blocked AIS and k&n... And she pulls like a train.... Now need some dyno time... Booked in for next Saturday... Happy days!!

how did you get the old flies off???...think I mushed a couple of my screws and then I gave up $:\$

Easy enough if you heat the screws up before trying to undo them as they're held in with threadlock. I did mine today. Heated the screws up with a soldering iron.

cheers Gra...yeh I heated up a big screwdriver and then held it on for a few seconds but I suspect it wasn't good enough and mainly that my screwdrivers weren't small enough.....im loathe to attempt it again this year now

red98 · « **Reply #4963 on:** 16 August 2015, 12:46:09 pm »

Took the thou for a spin around the oxfordshire country side looking for a combine harvester

...stopped at "H"s for a bit of brekkie and bumped into FAZER390 showing off his super clean gen 1....good to see you again jason, hope you have a good day, I expect a full report later with piccies

redfox1 · « **Reply #4964 on:** 16 August 2015, 01:11:02 pm »

Cleaned it!

slimwilly · « **Reply #4965 on:** 17 August 2015, 07:16:31 am »

Yesterday, met up with Dazza, in beautiful Herefordshire,

rode the A44 to Crossgates and met up with Nick Crisp,,bacon sarnies were ordered,,route sorted and off.

Did the TT to Newtown,then Nick picked a cracker of a scenic route over the mountains,stunning views.

Out to the coast,Mclnthlth,,haha,,spelt wrong,,,then down towards Aberystwyth and back along the A44 to crossgates.

Good weather ,not hot though,

noggythenog · « **Reply #4966 on:** 17 August 2015, 07:54:28 am »

I recognise that resorvoir slim, big steep hill to get to that view point, you take the road from llanidloes....you must have done the mountain road to machyncleth then very nice

slimwilly · « **Reply #4967 on:** 17 August 2015, 12:29:07 pm »

Yes , that's the one,,lovely views, where were you,we kept looking ?

noggythenog · « **Reply #4968 on:** 17 August 2015, 01:04:40 pm »

Quote from: slimwilly on 17 August 2015, 12:29:07 pm

Yes , that's the one,,lovely views, where were you,we kept looking ?

Hmmmm....foccin working as usual......gotta keep the cash flow flowing......just spending it too fast...like last nights purchase of a mountain board for when im out pushing the pram

......need to invest in the additional brake kit.......anyway.soon betime for winter hibernation though so need to get out there some more.

Yeh me & pilgo did that road it was lovely

Then another time just passed that resorvoir i took the wrong turning to the mountain road and ended up down some goat track.

Dazza will be getting a Welsh passport soon hes becoming an addict

slimwilly · « **Reply #4969 on:** 17 August 2015, 05:27:20 pm »

That's nothing,,Nick Crisp has a Welsh accent now

fazerscotty · « **Reply #4970 on:** 18 August 2015, 09:02:20 pm »

Scrubbed the new PR 2's in with a runacross to Slimwillyland.
Only had one moment when I pushed a little to hard going into and out of a corner

slimwilly · « **Reply #4971 on:** 19 August 2015, 07:24:35 am »

Go steady , our hedges are already full of holes !!!!lol

Hedgetrimmer · « **Reply #4972 on:** 19 August 2015, 08:57:35 pm »

Rode over to Erwlon campsite at Llandovery on Saturday, met with slim and dazza on Sunday for a good ride, then enjoyed two more days of good riding weather in Wales before heading home in the pissing rain today. I'll let the pictures do the talking:

Frosties · « **Reply #4973 on:** 19 August 2015, 09:43:36 pm »

Nick - yourself, Slim, Dazza and Red always seem to be out and about. You all retired or on the sick

Oh, and I'm now coveting the bike of FAZER390

below Stunning doesn't come close.

sinto · « **Reply #4974 on:** 19 August 2015, 10:25:38 pm »

Fitted a new exhaust, sounds amazing, and when I took out the baffle, it sounds even more amazing ;-)