Date: 25-10-25  Time: 12:52 pm
« previous next »
Pages: [1]

Author Topic: Exup cable question  (Read 2790 times)

solorider

  • WSB Pack Hound
  • *****
  • Posts: 717
Exup cable question
« on: 27 March 2012, 01:15:58 am »
As some nice last owner disconnected the cables I have to replace them as they were frayed,so the question is does the top cable go to the top of the motor and top of the exup valve? Or do they cross over?
Logged

Falcon 269

  • GP Hero
  • ******
  • Posts: 5,900
Re: Exup cable question
« Reply #1 on: 27 March 2012, 08:15:44 am »
I think the cables are numbered and there's corresponding numbers on the servo motor pulley.

You can get the orientation of the cables at the valve pulley from Pat's Site.
Logged

eddie

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 5,622
Re: Exup cable question
« Reply #2 on: 27 March 2012, 05:07:54 pm »
Logged

solorider

  • WSB Pack Hound
  • *****
  • Posts: 717
Re: Exup cable question
« Reply #3 on: 30 March 2012, 07:59:34 am »
Quote from: eddie on 27 March 2012, 05:07:54 pm
colour coded
 
http://www.cartestsoftware.com/fz1/images/exupcableadjustingnuts1.jpg

The link you supplied did not work,but thanks for the info,in the end I got what I needed from the other fazer owners site http://fazer1000.yuku.com/topic/1524/EXUP-Valve-Maintenance#.T3ValhB5mSM ,it was lucky the owner did not remove the cables from the top as I would have been stuck
Logged
Pages: [1]
« previous next »