erm whats a centre stand? now getting the bike onto a rear paddock stand takes some doing, first get stand behind bike set to right width, next put a block of wood under side stand so bike is almost vertical, then while still holding on to bike (important if outside and it's windy) get the stand under swingarm/onto bobbings, make sure they are seated on both sides and check again, lever down on stand and its done now you can let go of bike. Getting it of is reverse of this except you dont need the block of wood and you check side stand is down check side stand is fully forward and check for a third time side stand is down and fully forward then lift the paddock stand till the wheel touches the ground making sure it's going to lean over to the side stand then hold your breath till it's on the side stand, lol.