Date: 22-11-25  Time: 04:52 am

Author Topic: RPM Needle not stable - with video  (Read 1086 times)

anutz

  • GP Hero
  • ******
  • Posts: 1,035
RPM Needle not stable - with video
« on: 10 September 2017, 07:22:20 pm »

Hi,


Been giving my FZS1000 a good going over before MOT, and have identified an issue.


As shown in the linked video, RPM fluctuates all the time, only by a few hundreds, but its at Idle or when throttle is open.


I have checked spark plugs, replaced them, checked HT Leads, and confirmed sparks, got a few shocks





I have not messed with Air filters, of Fuel filters yet but wonder if this is a sign of bad combustion or somete else i.e. TPS or something


Thanks


Anutz

unfazed

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 5,342
Re: RPM Needle not stable
« Reply #1 on: 10 September 2017, 07:29:14 pm »
check the air filter and balance the carbs and set the TPS as a starter, but many of the 1000s and 600s are like that.
Badly adjusted Pilot screws can also cause it. Very difficult to get it perfect without a co2 meter for each downpipe