Date: 27-10-25  Time: 12:07 pm

Author Topic: plastic bit part number?  (Read 2903 times)

Val

  • Naughty Corner
  • WSB Pack Hound
  • *****
  • Posts: 983
plastic bit part number?
« on: 06 March 2016, 01:56:38 pm »
Hi All,

when using the front paddock stand, it has slipped and broke a plastic bit that is on the front axle.

Cheap paddock junk  :'(

I suppose this is some kind of dust guard that sits in front of the bearing dust seal.

The problem is I cannot find that part anywhere listed neither in parts pdf or online, can you help me here with part number?

Here is a picture of the nearside with the black plastic bit in place as it should be:



Here is a picture of the offside with the broken black plastic bit missing:



BTW if you have any idea about good front paddock stand too...

Deefer666

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 7,720
Re: plastic bit part number?
« Reply #1 on: 06 March 2016, 03:01:18 pm »
All looks fine to me, one side is the speedo drive and the other is the wheel spacer, can't seem to see what you're getting at or am I missing something completely obvious?



unfazed

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 5,342
Re: plastic bit part number?
« Reply #3 on: 06 March 2016, 07:13:31 pm »
All looks fine to me, one side is the speedo drive and the other is the wheel spacer, can't seem to see what you're getting at or am I missing something completely obvious?

 :agree Lost me also,

How about a picture of the actual thing you broke? The only plastic thing in there is the seal

Val

  • Naughty Corner
  • WSB Pack Hound
  • *****
  • Posts: 983
Re: plastic bit part number?
« Reply #4 on: 06 March 2016, 09:41:02 pm »
All looks fine to me, one side is the speedo drive and the other is the wheel spacer, can't seem to see what you're getting at or am I missing something completely obvious?


 :agree Lost me also,

How about a picture of the actual thing you broke? The only plastic thing in there is the seal


Here is the broken plastic:





It sits here on the front axle between the fork and the bearing seal:






Deefer666

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 7,720
Re: plastic bit part number?
« Reply #5 on: 06 March 2016, 09:51:00 pm »
Baffled

bandit

  • Club Racer
  • ****
  • Posts: 491
Re: plastic bit part number?
« Reply #6 on: 06 March 2016, 10:49:14 pm »
As everybody else has said have no idea where that,s come from as our bikes don't have that piece between the fork & wheel, I have a 1998 model & the front wheel has never been taken out. It looks more like some type of clip rather than a spacer as it's not completely round.     

unfazed

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 5,342
Re: plastic bit part number?
« Reply #7 on: 06 March 2016, 11:18:28 pm »
Are your sure it is not part of the paddock stand, never saw anything like that on the Fazer

bandit

  • Club Racer
  • ****
  • Posts: 491
Re: plastic bit part number?
« Reply #8 on: 06 March 2016, 11:31:40 pm »
Unfazed, you are right it's off the paddock stand I knew i'd seen that clip some where see pick,


http://www.demon-tweeks.co.uk/motorcycle/front-stands/warrior-front-paddock-stand 

unfazed

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 5,342
Re: plastic bit part number?
« Reply #9 on: 07 March 2016, 07:55:43 am »
 :thumbup

limax2

  • GP Hero
  • ******
  • Posts: 1,930
Re: plastic bit part number?
« Reply #10 on: 07 March 2016, 09:03:12 am »
Well spotted 👍

Val

  • Naughty Corner
  • WSB Pack Hound
  • *****
  • Posts: 983
Re: plastic bit part number?
« Reply #11 on: 07 March 2016, 12:48:50 pm »
Are your sure it is not part of the paddock stand, never saw anything like that on the Fazer

Thank you well spotted.

Am I stupid  :'(


unfazed

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 5,342
Re: plastic bit part number?
« Reply #12 on: 07 March 2016, 02:15:29 pm »
Are your sure it is not part of the paddock stand, never saw anything like that on the Fazer

Thank you well spotted.

Am I stupid  :'(

My goodness no your not, but two short planks come to mind  :lol :lol :lol