Date: 26-10-25  Time: 01:17 am

Author Topic: Chain measurement question  (Read 1615 times)

YamFazFan

  • GP Hero
  • ******
  • Posts: 2,626
Chain measurement question
« on: 19 October 2014, 07:19:59 pm »
Hi guys.Hope you can settle this for me.If the final drive chain length on a bike is specified as being 96 links,do you count the number of rivet pins to get the 96 figure?.Many thanks.YFF.

chaz

  • WSB Pack Hound
  • *****
  • Posts: 789
Re: Chain measurement question
« Reply #1 on: 19 October 2014, 09:23:29 pm »
here's a link? but it doesn't help? link....... get it?                                   

count the number of rollers is what it says on another site? if its odd you need a cranked link.

YamFazFan

  • GP Hero
  • ******
  • Posts: 2,626
Re: Chain measurement question
« Reply #2 on: 19 October 2014, 11:14:09 pm »
Thanks for the info chaz.I bought a length of chain today from off a huge coil for my old Kawa trail bike,using the pitch & link number spec from the service manual.Got home & thought i'd bought half a chain :lol.Was thinking only the outers count as links :rolleyes(was too dark to go out to the shed & check it against the old 1).

YamFazFan

  • GP Hero
  • ******
  • Posts: 2,626
Re: Chain measurement question
« Reply #3 on: 20 October 2014, 04:13:59 pm »
The answer seems obvious now :rolleyes.You count the inner roller link in addition to the outer pin link (the part I allways think of as 'The Link') don't you.eg 48 roller links + 48 pin links=a 96 link chain.

witchfinder

  • CBT Wobbler
  • *
  • Posts: 41
Re: Chain measurement question
« Reply #4 on: 20 October 2014, 09:27:16 pm »
Mark any outer link plate with something ,paint pen ,chalk etc then count all the outer plates and double it simples  :)

lew600fazer

  • GP Hero
  • ******
  • Posts: 2,253
Re: Chain measurement question
« Reply #5 on: 20 October 2014, 10:19:09 pm »
here's a link? but it doesn't help? link....... get it?                                   

count the number of rollers is what it says on another site? if its odd you need a cranked link.


Listen to the video, he talks about the width of the chain then measures the pitch, then he goes on about the width of the chain, fair enough he measures the distance inner plates and roller, surprised that cycle chains are still measured in inches etc!

I know nit picking

YamFazFan

  • GP Hero
  • ******
  • Posts: 2,626
Re: Chain measurement question
« Reply #6 on: 20 October 2014, 11:15:46 pm »
Mark any outer link plate with something ,paint pen ,chalk etc then count all the outer plates and double it simples  :)

Top tip ;).Never bought a chain this way before (broken to length from off a stock coil).Seems good value tho..£19.00 for 96 links.

midden

  • Naughty Corner
  • GP Hero
  • ******
  • Posts: 2,546
Re: Chain measurement question
« Reply #7 on: 20 October 2014, 11:44:53 pm »
Mark any outer link plate with something ,paint pen ,chalk etc then count all the outer plates and double it simples  :)

Top tip ;) .Never bought a chain this way before (broken to length from off a stock coil).Seems good value tho..£19.00 for 96 links.
Got to be a winner
All that remains is for you to share the link to the site  :D