These are the Gilles ones i bought from the above post, these for some reason are sold with the gear selector arm running outside the frame,,with extender bolts to the gearbox,this is to accomadate the amount of adjustability on the footrests,because the rod would not line up with the frame hole,,they could of put more rod fixing positions to line up with the hole.
I drilled and tapped a new fixing point,and it works well.
|
Brake side on |
|
Tapping |
|
Gear rod on |
So if you find any the same then buy them,
A for fitting Gen 1 to a Gen 11 ,,ask Luke maybe,,