There's no blowing AND the bike runs fine ???


I reckon you've just answered your own question........ 

Well fine ish, i get no where near the MPG some lads get on here, i average 47mpg and powers jerky sometimes at lower rpm

this post should be stickied already 

Avon storm 2 mine are at 9,000m front and 8,000m rear and i dont ride slow 

plugs 8k miles
Oil and filter 4k miles
Air filter clean it every 4k
Chain - clean and oil every 500 mile

Wet and dry sandpaper clean down, then polish with autosol

Should swing right round providing you remove the seat/wires

I'll take the discs if theyre in good nick

After changing my pads i noticed there seems to be a small leakage coming from the bleed nipple.
 
I dont think its leaking from the nipple itself, but from around the threads (its not crossthreaded)
 
Its not leaking massively but its noticable overnight as the caliper has some small patches of brake fluid.
 
The fluid doesn't seem to seep when i'm applying the brakes and the brakes work fine.
 
I've tightened the nipple as tight as i dare but there seems to be a very small amount of fluid existing.
 
Is it worth buying a new bleed nipple or just replace the caliper with a second hand one?

sounds as warped disc. You didn't apply any force against it to extract the old pads, did you?

Just went for a 12mile ride does not seem to be vibrating anymore however does get hot

He should be serving time still, proper unjustice for the family they lost their family forever and hes swanning round playing football

After some renthals for my fazer 600 preferabley pre drilled

Also on the look out for short levers 

its a carbed bike its perfectly normal