google: venture shield i use this stuff its clear film and sold by 3m to protect fairings ect you can buy a kit pre-cut for your own bike or you can buy just bits and make your own cut-offs ive done loads of bikes from my own to friends, fairings-forks-engine covers you name it you can apply to anything infact my gf brought me  a ltd edition shoei for my B-day and to keep it like new ive done the helmet as you can buy specific helmet kits,  i always do the fork legs as well to stop unwanted chips, once applied its very hard to even see the film.
 
Alterantive you can buy a roll of the clear stuff oxford sell but i find that stuff not to my likeing and it peels off.
 
Here's the link for venture shield http://www.venture-shield.co.uk/
 
This is the company that sells me the stuff http://showtrax.net/ and by what ever size you require very cheap
 
Here's a pic of some forks i did and the black yokes as well you should be able to see the outline.

 
 
Dave .

Very nice mike and only the blue ones look the fastest.
 
Now i note from the last pic ! your using clear fluid pipe on the master cylinder so pressume your setup is without res container because like yourself i have the LSL sets and i note they sit slightly higher, so did you have probs with the stock res container and pipe!! when you fitted the lsl sets, i myself have moved the res as far up as possible but i do think it sits slightly low in conjunction with the position of the lsl sets and as ive put no miles on it id rather dress the problem if there is going to be one before i do use it.
 
 
Dave 

  YES PLEASE i cant resist and it will match the pro-tec billet ive just had arrive .
 
      so count me in.
 
 
   Dave 

Tar luke, i tried to copy and paste, but when i previewed there was no pics!!
 
B1 if get no joy with the shock and you want to replace it with something thats been given the thumbs up by many happy punters, luke(devilsyam) is the man to talk to.

that'll be the one! I knew someone here would have seen it. looks good in the flesh with a good quality paint job.

Nice looking bike with the right mods.
 
Ive been to the sellers house to collect some clear indi lenses up i won off eblag, seemed a nice chap gave me some free orange bulbs as well, i was not aware he had a fazer as well, looks like it had a ohlins rear shock with pre-load adj as well in the pics so was fully sorted with the front springs and ivans kit, however some pics show it without the ohlins shock did he take this off!!
 
 
Dave 
 

I take it the engine has been repainted ? ...
I do wonder how many hours you put in to getting a bike to that standard ( ie as new) ??

Jon, the only new paint is on the rocker cover, the engine has not been touched however i did clean it with a toothbrush    to bring it up as you see, the previous owner had never riden the bike in the rain or bad weather so that helps .
 
Ive spent afew hours indeed but ill confess i do like to tinker i get great enjoyment from doing it, and will have to find something else to tinker with now .
 
Dave 

Ian,  ive got some proper tools to do that job wth ease but i dont know where you are in the country! if your local to Derby id be happy to come and do it for you FOC .
 
 
 
Dave 

...you may need therapy

 
Your probably right as well....

Ayup chaps, ive about finished my little project till the new year ! its minta than mint, did i tell ya all i have a OCD    and taking into account its condition and what id have to pay to get something in this spec, its alot of bike for not alot of money.
 
new Seat an all the carbon now fitted.

 

 I brought some oberone heavy stainless bar ends and had em powder coated black no more vibs,i removed the stock fairing decals but it looked to plain so the decals you see, the fazer is from the fz8 and the red 1000-exup decals from ebay.

 

I cant make my mind up if i like the NRC engine covers! and the colour is a very slight shade different than the rocker so they may go back on ebay! or ill get the spare rocker i have colour matched, oh yeah i have some billet covers also coming from the states, i also had the front engine/frame brace powder coated black and all the little brackets that cant be seen in the pics.

 
 
Timing cover needs re-powdercoating as i did not clean the bolt holes enough    and so when i put the bolts in i got a hairline crack in the powder so only fitted for pics, and i removed the genuine yam crash bungs and replaced with the moto ones and whilst i had everything in bits i polished all the stainless bolts.

 
 
Carbon rad covers now fitted.

 
 
Im going to replace the chain to a nice coloured one.

 
 
Yep its even got heated grips! Daytona ones these feel like sportsbike grips nice soft feel to em and yeah i do plan to use it for my trips into europe.


 
LSL rear sets and HM quickshifter.

 
 
So id like to wish all you foccer's a merry xmas ...
 
Dave 
 
 
 
 
 
 
 

I do recall such dave....you lucky smooth talkin person ! 
 
feck that does seem a long time ago now, but it was only just over 2 yrs.
 
I also still remember how lucky dek was when he had his blowout in 06, and you went off the road to see the scenery in 07. Makes u think life aint all that bad, cos it all could have been very diffrent outcome  ....
 
oops, sorry ...going off topic! 

Yeah jon, that day twas a learning curve,  you can make many mistakes in life but only make the same one once 
I wrecked a stunning bike gut wrenching, but we still hammered on racing up the stelvio with a flapping fairing  and i sold for the bike for what i paid for it so not all bad.

I can only think it may have had a airline fracture and i disturbed it from pulling the plugs leads off a couple times for the removal of the rocker cover(powder coated) and the AIS removal as the lead caps was quite firmly on and id not touched the plugs before hand so cant own up to that one.
 
Dave 

Mike, my bike does not have the original gauge its fitted with the multi gauge, and my bike ran out of fuel when it stated i had 2 litres left in the tank, ive since sorted the problem with buying another sender of evilbay for a couple quid and putting a slight bend in the sender, this has sorted it and now reads hopefully bang on.
 
Cheers Dave 
 
 

I bet that was a seriously pleasant moment when it came out!!

after sitting there with my head in my hands  thinking oh sh1t this is going to be major and ill need to strip top end off, and so when my little removal method worked a treat it felt really good as it would have played on my mind and caused me sleepless nights