Date: 15-06-24  Time: 17:55 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - robbo

Pages: 1 ... 157 158 [159] 160 161 ... 163
3951
General / Re: Three word story
« on: 30 June 2016, 11:59:53 pm »
the infected eardrum

3952
General / Re: Three word story
« on: 29 June 2016, 10:28:03 pm »
slowly starting to

3953
General / Re: what did you do with your fazer today ?
« on: 29 June 2016, 10:20:06 pm »
Bolted on my modified Ventura rack system, in preparation for this weekends LOFO campout, weather dependent, as always in this country.

3954
A Friday lunchtime decision is fine with me.

3955
Any news if this weekend's a goer.

3956
Since when did GH600 look anything like robbo. If you're on the home brew you're on to a winner dude.Lol.

3957
Fazer 1000/FZ1 corner / Re: Mini indicator recommendations
« on: 23 June 2016, 10:54:34 am »
As far as front indicators are concerned I go for the bigger is better


Very good advice, the eye has difficulty judging the distance to a small object, even if it's bright. A cager just glancing at the mirror may see a bright light but not realize it is close or not even realize it comes from your bike and not pay attention.


Bike manufacturers don't make big ugly signals to piss you off, they do it for a reason.
On my bike, I removed the small and bright aftermarket front signals (that the PO had installed) and installed the big ugly OEM ones with bright LED bulbs inside.


Function over form...

You're preaching to the converted, I've already stated my fronts are stock.

3958
Fazer 1000/FZ1 corner / Re: Mini indicator recommendations
« on: 22 June 2016, 08:05:55 pm »
You don't indicate anyway...just chop in front of me and roar off   :lol

Decided on the Oxford halogens. Next time we're out I'll leave them on permanent hazard, you won't have a scooby which way I'm going. Tee hee.

3959
Fazer 1000/FZ1 corner / Re: Mini indicator recommendations
« on: 22 June 2016, 09:55:01 am »
That's the one, but need to get a better made make that will inspire a bit more confidence. Good luck with your sale.

3960
Fazer 1000/FZ1 corner / Re: Mini indicator recommendations
« on: 21 June 2016, 08:26:38 pm »
I have the stock ones on the front. As I've fitted a really high level pipe the indicators are mounted on the numberplate to get under the pipe. I was hoping to just take apart the wiring I've installed and substitute a better made product for what I've got. Thanks for your suggestion, it's all food for thought.

3961
No worries Dazza, it would be my pleasure.

3962
Fazer 1000/FZ1 corner / Mini indicator recommendations
« on: 21 June 2016, 07:00:27 pm »
I wondered if someone could recommend a reliable make of after market mini indicators. Nothing fancy, just a black body, amber lens preferably arrow head shape. Think the ones I've got are Motrax, which have lasted about 800 miles before the sprung section of the bulb holder has decided not to be sprung any more. Thanks in advance.

3963
If we were to look in at West Bay around lunchtime, then quite a good way home would be north out of Bridport on the A3066, picking up the A30 just east of Crewkwerne. Then, Shaftesbury, Salisbury, Stockbridge, at the A303 petrol then depending on the time , either A30 to Camberley, south on A331 to A31, A3, M25 home, or if time's short M3 to Junct 4 from the A303 petrol stop to pick up the A331/A31/A3/M25 etc. Just a thought, I use this route when I do a Cornwall and back in a day trip.

3964
Excellent.I love it when a plan comes together.

3965
Hi Dazza,
In that case,if you're coming out of Gravesend on the A227, I can get breakfast at the Oakdene and then meet you on the A227/A20 roundabout at the bottom of Wrotham Hill. If we swap mobile numbers you could call me when you're leaving Nell's,then I'll know how fast to eat. :lol

3966
Croydon's my nearest town, so meeting up won't be a problem, anywhere on the A272 that's good for you. If you go through Cowfold, I could grab breakfast at The Chalet and meet you on the Cowfold roundabout, depending on how early you leave, or anywhere further west if you're not on the 272 at that point, as I don't know what direction you're coming from. Should be a good crack.

3967
Hi Dazza,
I'd definitely be up for some riding/camping and beer, whatever the chosen weekend. A poor weather forecast would be the only deciding factor, as have had more than my fair share of camping in the rain. Where would you be aiming for, somewhere like the Lulworth Cove area, or more into Devon?.

3968
Fazer 1000/FZ1 corner / Re: Nope, Not Tempted
« on: 18 June 2016, 09:25:26 pm »
Hi Hedgetrimmer,
A bit off topic, but wondered what windscreen you use for long distance/touring trips. I think that's the only area that is difficult to confidently improve as there are so many differing opinions.
Thanks in advance.
Robbo.

3969
Fazer 1000/FZ1 corner / Re: MRA X-creen XCTA (Touring)
« on: 17 June 2016, 08:58:48 pm »
I'll have a measure up tomorrow to make sure the top edge is wide enough.Thanks for the suggestion.

3970
Fazer 1000/FZ1 corner / Re: MRA X-creen XCTA (Touring)
« on: 16 June 2016, 04:57:06 pm »
Tmation,
Thanks for your info.Height wise we're of similar stamp, I'm using an Arai. Have had a quick search for a Puig double bubble but they might not be  so readily available now.Out of the country at the moment but will have a proper look when I can get to my laptop on my return. Thanks again for your info.

3971
Fazer 1000/FZ1 corner / Re: MRA X-creen XCTA (Touring)
« on: 16 June 2016, 12:25:17 am »
Thanks Tmation for your reply and pics.The touring version is about 70mm taller than your sport model.Is the Puig screen taller than the stock screen.The Fazer is such a do it all bike, let down IMHO by its lack of fast cruising ability.My old GS1150 was not a quick bike by any means, but you could sit at 90 from one fill up to the next, which when getting down to the south of France is all I'm after.Do you think the Puig and the MRA touring would achieve what I'm after.Height wise I'm just under 6ft.
Thanks
Robbo.

3972
Fazer 1000/FZ1 corner / MRA X-creen XCTA (Touring)
« on: 14 June 2016, 09:42:06 pm »
Had a trawl through the minefield of "what windscreen", and wondered if anyone has tried one of these fitted to the stock Fazer screen.Was thinking of just using the fitting to clamp it to the top of the screen to hopefully get a relaxed cruising speed around the 85/90 mark abroad.Thanks in advance for any opinions.

3973
Diesels and Lawnmowers (Bike racing n things) / Re: Luis Salom
« on: 05 June 2016, 10:15:35 pm »
All todays MotoGP podium dedicated their finish to Luis and his family.All racers are aware of the thin line between today and tomorrow.Two riders died at the TT so a sad weekend for racing.

3974
Fazer 1000/FZ1 corner / Re: Rattle from clutch housing when hot ?
« on: 01 June 2016, 03:06:04 pm »
"They all do that sir" was what the beemer mechanic said to me when I queried a top gear whine on my GS1150.The gearbox completely shat itself on the way home from last years Bol d'Or. The upside being the money I got for the broken BM went towards my Fazer, so all good really. :lol

3975
A 26mm socket taped to a length of alloy or plastic tubing about 20" long,drill a hole through the opposite end of the tubing to allow the insertion of a screwdriver forming a  T-bar,works a treat.

Pages: 1 ... 157 158 [159] 160 161 ... 163