Date: 01-06-24  Time: 11:46 am

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - GH600

Pages: 1 [2] 3
26
Introduction / Re: Howdy!
« on: 18 March 2017, 06:41:08 pm »
Hiya,


new member, my names Ben and I have a 1998 fazer 600. Its my first bike after passing my test and I love it to bits! Based in the dorset area :-)
Snap except my names not Ben  :lol  Welcome

27
Events, Meets, Ride outs etc / Re: A blat down the runway
« on: 17 March 2017, 06:41:51 pm »

Last year you pay £2.00 & sign a disclaimer  then have as many goes as you can  :D

28
FZS600 Fazer / Re: Standard silencers.
« on: 17 March 2017, 05:52:34 pm »
Not standard . Try SP Engineering  in Frome Somerset , I have one & I like the sound of it with the baffle in  :)

29
Events, Meets, Ride outs etc / Re: A blat down the runway
« on: 17 March 2017, 05:23:41 pm »
Ive done the airfield down there, it's bloody awesome. A great evening's fun. Might head down for that. Perhaps we can have FOC-up the runway meet?
That would be good , I have seen a couple of  FZS 600 there Silver ones . Here's me on my Versys 650 leaving my son behind on his Daytona 675  :D 

30
Events, Meets, Ride outs etc / A blat down the runway
« on: 17 March 2017, 03:24:06 pm »
http://www.bikersblast.com/   This is fun  :)  Starting again in April

31
Introduction / Re: Finally getting a Fazer
« on: 27 February 2017, 08:21:18 pm »
Let him carry on thinking it's a "budget commuter" He'll get a nice big surprise when he gets it  :lol 

32
General / Re: Bit of tweaking today
« on: 20 February 2017, 05:49:22 pm »

Most likely get more mess under the cover & less lube into the chain , I have a TUTORO on my Fazer & it was on my Versys before that , for what it is (cheap) it works ok .

Can you pop a pic on to see were your feed is, I had it originally feeding to the side of the rear sprocket, which to be honest was doing the job. I was at a meet up in September and a mate had his rigged to feed to the front sprocket as he reckoned he would get less throw off on to the rear wheel. If it does not workout it is only a5min job to change it out, oh my bike is an MT09 by the way. I stay on this forum for the craic and some good ideas as well. The MT forum is a bit quiet.
Mine's got the twin outlet  :rolleyes photo's upside down for some reason

33
General / Re: Bit of tweaking today
« on: 19 February 2017, 08:43:15 pm »
Most likely get more mess under the cover & less lube into the chain , I have a TUTORO on my Fazer & it was on my Versys before that , for what it is (cheap) it works ok .

34
Events, Meets, Ride outs etc / Re: LOFO'S run along the Jurassic coast
« on: 09 August 2016, 11:10:39 am »
When im down that way i take the ferry across to swanage from poole. Cuts out a lot of less atractive miles.
That's Poole to Studland ferry  ;-)

35
General / Re: what did you do with your fazer today ?
« on: 28 July 2016, 08:24:34 pm »
Wednesday night Two runs down Henstridge runway (750 mtrs) beat my son on his 675 Daytona both times & 104 mph top speed on the garmin quest  :)

36
General / Re: what did you do with your fazer today ?
« on: 17 July 2016, 08:29:13 pm »
Fitted the TUTORO I had from the Versys then went for a ride down to West Bay  :)

37
Events, Meets, Ride outs etc / Re: Poole Bike Night 19th July
« on: 15 July 2016, 07:39:27 pm »
Here's an alternative on Tuesday nights  http://www.bugad.com/not-poole-quay.html  8)

38
General / Re: Insults... whats your best?
« on: 15 July 2016, 07:34:39 pm »
Tnuc   ;)

39
Events, Meets, Ride outs etc / Re: Poole Bike Night 19th July
« on: 13 July 2016, 04:37:34 pm »
Have been in the past but not for Two years. If it's a nice day there will be a LOT of bikes.

40
General / Logging in from a phone
« on: 29 June 2016, 07:04:47 pm »
Can't seem to be able to log in from my phone now for some reason  :(  Had to change the PW the other day & I have no probs logging on via a computer . Any ideas anyone ?

41
FZS600 Fazer / Re: Crap mirrors on '98
« on: 29 June 2016, 06:57:07 pm »
The mirrors on my 98  Fazer are wonderful compared to the ones I had on my 09 versys   :)

42
One more option .  Sammy Miller motorcycle museum   👍  near New Milton

43
Introduction / Re: New here
« on: 24 June 2016, 10:13:58 pm »
Very nice 8) but whats that wrap stuff round the down pipes?
stops crud hitting them so the previous  owner thought. Not looked under it yet

44
For Sale & Wanted / Re: fzs 600 gen 1 rear rack for sale
« on: 22 June 2016, 10:33:06 pm »
Now sold to GH600.
Arrived today  :D   Thanks a lot Chris  :thumbup

45
General / Re: what did you do with your fazer today ?
« on: 22 June 2016, 10:28:02 pm »
Took mine down the runway twice at Henstridge on their biker blast http://www.bikersblast.com/   :D

46
If your still down that way on the sunday a lot of bikes go to West Bay . It's got cafe's & stuff there & Helmet city  shop as well .

47
Introduction / Re: New here
« on: 18 June 2016, 09:57:16 pm »
I had the Versys from new early 09 it's a very good bike . The Fazer is lighter & faster but you have to down change more on the Fazer . I've had a lot of bikes in the past ie DT 125 E,  XS400SE, KH250, RD250, RZ250R, FJ 1200, Cagiva 650 elephant, Bandit 1200 + many more . I liked the Fazer when it first came out & test rode one a long time ago but I bought the Cagiva instead  :o Two different bikes at the end of the day but I like both of them. 

48
Introduction / Re: New here
« on: 18 June 2016, 04:26:39 pm »
Here you go  :D

49
For Sale & Wanted / Re: fzs 600 gen 1 rear rack for sale
« on: 17 June 2016, 06:26:49 pm »
I'm interrested  :b but not sure how to go about paying for it, ie method

50
Introduction / Re: New here
« on: 17 June 2016, 06:09:07 pm »
some pic's on my phone but it won't talk to this computer (xp)  :pc   T'other computer is sick but back soon hopefully & the batteries are flat on the proper camera (now on charge) so some pic's tomorrow with luck  :) Got some of my old Versys & my XT 250 which I still have.... Thats my Son on the Daytona  :)

Pages: 1 [2] 3