Date: 01-06-24  Time: 19:03 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - matt7chunk

Pages: 1 ... 3 4 [5] 6 7 ... 11
101
FZS600 Fazer / Re: Yes, I know another tyre question
« on: 06 September 2017, 03:43:32 pm »
Had the t30's on my 600 all last season and half of this year's, can't really fault them in the dry , great fun in the corners because the tread pattern stops early so the edge parts are pretty much slicks lol , just changed to pr3's and really enjoying them now and there amazing in the wet where as I found the t30s struggle in the wet .

102
FZS600 Fazer / Re: No respect!!
« on: 05 September 2017, 10:08:49 pm »
It's really deep scratch , at the mo I have pulled the decal off and have rubbed down the lips with 1200 and filled the scratch with scratch pen clear coat , going to let that cure then flatten with 2000 and polish out , wish me luck .


Wankers probably wish they had there own bike but don't because it's hard to save up at the job centre.  C##ts!

103
FZS600 Fazer / No respect!!
« on: 05 September 2017, 02:29:16 pm »
parked my bike in town for 10 minutes come back and notice this on the front of my bike!! no fucking respect!  really deep gna have to cover with this i reckon http://www.ebay.co.uk/itm/YAMAHA-3D-DOMED-BADGE-STICKER-GRAPHIC-DECAL-MOTORBIKE-MX-ENDURO-CAR-SUPERBIKE/152630166078?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

https://photos.app.goo.gl/xO7gY5XLwAiBYFkA2
any other ideas?

104
FZS600 Fazer / Re: Crap mirrors on '98
« on: 20 August 2017, 10:15:32 pm »
Quote from: fazersharp on 31 July 2017, 10:00:13 am
Quote from: Fazerider on 31 July 2017, 08:30:05 am
I’m tempted, but half the riding I do is at night and being able to cut out the glare of the trillion-candlepower headlights behind with my elbows is a massive benefit of crap mirrors!
They should make them with that flip up thing that car rear-view mirrors have


Don't know if it would work? I think they rely on rear windows reflection?

105
FZS600 Fazer / Re: What have you done to your FZS600 bike today
« on: 05 July 2017, 11:03:25 pm »
shed update finally there!,  i went with 18mm ply for the floor , finally the fazer and the ball and chains 125 are living dry

106
FZS600 Fazer / Re: What have you done to your FZS600 bike today
« on: 05 July 2017, 10:56:20 pm »
black is the new blue

107
FZS600 Fazer / Re: What have you done to your FZS600 bike today
« on: 05 July 2017, 10:53:20 pm »
Quote from: Fazer99 on 05 July 2017, 09:31:06 pm
Not today but Monday evening on my way home from work, some FOCCING ASSHOLE pulled out in front of me and slammed his brakes on causing me to crash into the ack of him and now my beautiful red beast is FOCCED.
hope your ok fazer99

108
FZS600 Fazer / Re: track day tyres
« on: 05 July 2017, 10:52:01 pm »
 :D :D :D :D woop, cheers bud

109
FZS600 Fazer / Re: track day tyres
« on: 05 July 2017, 10:22:27 pm »
cheers dazza! will they still be ok for general riding afterwards though , like couple months normal summer ride until end of season?


110
FZS600 Fazer / track day tyres
« on: 05 July 2017, 10:04:50 pm »
hey guys.


thinking about a track day (novice only brands hatch in august) atm i have new set of bridgestone t30 evo's fitted to my fzs600,
my question is can i ride the 70miles to brands, spend the day learning the track, have some fun, and ride home again on the same tyres ?


or will the tyres be done for?


sorry for the novice question but really dont know how tyres last on track for a first timer


PS i have reasonable experience on road and ride hard at times and my tyres usually last around 7000 (t30 evo)     

111
FZS600 Fazer / Re: What have you done to your FZS600 bike today
« on: 19 May 2017, 10:21:04 pm »
Quote from: tommyardin on 18 May 2017, 10:22:16 am
Quote from: matt7chunk on 05 May 2017, 08:40:11 am
only 12x8 (wife free zone) but big enough for bike bench chair tools etc , saving up for a sealey space saver lift next



Great looking shed Matt.
If the floor in your new shed is tongue and groove boards timber (T&G) place a piece of 3/4 inch ply under where the life will live, the casters on the lift may disappear  through the 8mm thick T&G boards and end up with your bike laying on its side after falling 2 or 3 foot from the lift.



Cheers bud, already thought of that lol laying 18mm osb3 throughout for a bit more strength

112
FZS600 Fazer / Re: Whining from engine on the motorways
« on: 18 May 2017, 07:43:54 pm »
yer i was the same when i put my standard exhaust back on for an mot , was like wtf is that lol but its all normal just not used to hearing it , haha

113
FZS600 Fazer / Re: seat mods
« on: 13 May 2017, 02:05:17 pm »
cheers mate had a little look, trying to find someone more local so i can go and have a look at there work

114
FZS600 Fazer / seat mods
« on: 12 May 2017, 09:23:34 am »
hey , can anyone recommend anywhere i could get my fzs600 seat modified for more comfort for longer journeys, new foam reshaping and covered etc ? 

115
FZS600 Fazer / Re: Standard rear shock
« on: 07 May 2017, 10:04:14 pm »
i have only done 8000 of them miles and tried a few different settings but just wondered what other people of my kind of weight have there's set to , just seem to find or too hard or too soft

116
FZS600 Fazer / FZS600 track day
« on: 07 May 2017, 12:00:05 am »
hey , still not got round to a track day yet, really want get on a track and really see what the bikes got , i've heard about sound limits etc , i have a BlueFlame exhaust (in the workshop ;) ) stamped with NOT FOR ROAD USE my question is can i use this on a track day or will it be too loud or will i need to use my standard exhaust?    (also have k&n air filter)




also anyone who has taken there fzs600 to the track, 1}is it worthy? 2}anything i should do or know before i go?




cheers guys! Matt

117
FZS600 Fazer / Re: Front disc brake bolts
« on: 06 May 2017, 11:17:51 pm »
+1 for red rubber grease, Just make sure you wipe off the excess afterwards so grit doesn't stick & collect around your piston.

118
FZS600 Fazer / Re: Standard rear shock
« on: 06 May 2017, 11:12:39 pm »
haha Darrsi!


could i get the standard shock refurbished or a better spring put on it?

119
FZS600 Fazer / Re: What have you done to your FZS600 bike today
« on: 06 May 2017, 10:10:15 pm »
nice ride to Great Yarmouth on the Fazer with my fiancee on her little CB125F  , stuck at 125 speeds but enjoyed it none the less.

120
FZS600 Fazer / Re: Standard rear shock
« on: 06 May 2017, 10:07:33 pm »
how much would a kebab shock cost? the bikes done 32000 so past the 20000 threshold , prob time for an upgrade then, 
Quote from: Koreanbaz on 06 May 2017, 08:55:51 pm
I found a ZX10R 07 rear shock in my garage today. Forgot all about it. It's only done 37 miles from new then got swapped. It looks like it should fit.  8)
reckon it will fit? have you got any pics?

121
FZS600 Fazer / Standard rear shock
« on: 05 May 2017, 10:57:03 pm »
hey, i weigh just about 16stone (fatty), what setting do think is best for my weight on the rear shock , i had it maxxed out but not sure thats right , anyone have an opinion?


cheer matt

122
FZS600 Fazer / Re: What have you done to your FZS600 bike today
« on: 05 May 2017, 03:36:05 pm »
MOT passed with flying colours :D

123
FZS600 Fazer / Re: What have you done to your FZS600 bike today
« on: 05 May 2017, 08:41:05 am »
MOT this morning at 11 just gave the fazer a once over no problems i can find, usually sails through 

124
FZS600 Fazer / Re: What have you done to your FZS600 bike today
« on: 05 May 2017, 08:40:11 am »
only 12x8 (wife free zone) but big enough for bike bench chair tools etc , saving up for a sealey space saver lift next

125
FZS600 Fazer / Re: Carb vacuum pipe caps
« on: 04 May 2017, 07:27:01 pm »
ooooo red ones! :eek

Pages: 1 ... 3 4 [5] 6 7 ... 11