51
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
52
Fazer 1000/FZ1 corner / hose question
« on: 20 December 2014, 10:08:39 am »
I need to change 2 off the hoses on my fz1 in the process I will loose coolest so what do I replace it with is there a deicated bike coolant or just a anti freeze mix
53
General / anyone living with warfarin
« on: 12 December 2014, 08:26:22 pm »
after to pe's im to go on warfarin but seems a bit hit and miss wanting bloods every two weeks is this the case?
anyone been on it long term
anyone been on it long term
54
Fazer 1000/FZ1 corner / huston i have a problem
« on: 07 December 2014, 02:37:41 pm »
i have removed bodywork from a gen 1 im doing for a customer
to remove the petrol cap you need to insert the key which i did and off went body work
now i need the key for the ignition i cant get the bugger out the petrol cap
anyone done this and got it out
to remove the petrol cap you need to insert the key which i did and off went body work
now i need the key for the ignition i cant get the bugger out the petrol cap
anyone done this and got it out
55
Fazer 1000/FZ1 corner / bit of a venture pictures added
« on: 27 November 2014, 08:07:53 pm »
well sorta got meself involved in hydro dipping the chap im working with has only ever done car stuff i saw potential in perhaps bike stuff and fronted this side of the operation
i want to keep it low key and small items but stuff were usally cussing as finish over time has tarnished are pride and joy
i want to make it clear i cant save heavily pitted or corrodded aliminium i dont have the equipment
however if the item is sandable and could be repainted then we can dip it
here is an example of what 80 quid posted back would get ya (this is you send me your items)
these are two pack laquered and gloss finish
other examples done
and before we get into long pointless debates about heat cycle on engine covers this process has been used under the bonnet of turbo fords which go through bigger heat cycles than bikes with no issue
for thoose who are more lets say adventurous
if anyone is intrested then drop me a line devilsyam@gmail.com
i want to keep it low key and small items but stuff were usally cussing as finish over time has tarnished are pride and joy
i want to make it clear i cant save heavily pitted or corrodded aliminium i dont have the equipment
however if the item is sandable and could be repainted then we can dip it
here is an example of what 80 quid posted back would get ya (this is you send me your items)
these are two pack laquered and gloss finish
other examples done
and before we get into long pointless debates about heat cycle on engine covers this process has been used under the bonnet of turbo fords which go through bigger heat cycles than bikes with no issue
for thoose who are more lets say adventurous
if anyone is intrested then drop me a line devilsyam@gmail.com
56
For Sale & Wanted / samsung note 3
« on: 26 November 2014, 07:16:44 pm »
Good order not mint couple of marks to chromed plastic band screen mint phone open to all extra cases USB leads etc
Selling as upgraded to 4 £250 on plus insured post
07736008778
Selling as upgraded to 4 £250 on plus insured post
07736008778
58
For Sale & Wanted / s/h r6 shock kit
« on: 17 November 2014, 05:38:53 pm »
selling for a old customer who has traded his bike in for a fjr
i will check it over and re set for weight and ride style for purchaser
http://www.ebay.co.uk/itm/141475199721?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
i will check it over and re set for weight and ride style for purchaser
http://www.ebay.co.uk/itm/141475199721?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
60
Fazer 1000/FZ1 corner / well number one fz1 finished for now
« on: 02 November 2014, 03:24:16 pm »61
For Sale & Wanted / Tyres only done 200 miles
« on: 27 October 2014, 06:35:04 pm »
Due to re mash of wheels I have fitted new boots to the carbon wheels so I have a pair maxxis 6029-- 190/120 touring tyres that have done 200 miles were fitted then bike went for paint
There are no puntures and no flat spots
£80 PLUS POST or collect bs14
There are no puntures and no flat spots
£80 PLUS POST or collect bs14
62
For Sale & Wanted / fz1 center stand spring needed or fazer 1000 looks like it will fit
« on: 24 October 2014, 07:24:50 pm »
as per title lost the bugger someware
pm me
pm me
63
For Sale & Wanted / gen 2 gilles rear sets
« on: 16 October 2014, 10:34:28 pm »
gen 2 gilles rearsets £250 posted uk (403 new) good condition
07736008778
07736008778
65
For Sale & Wanted / 2 bits i need
« on: 13 September 2014, 04:44:53 pm »
fazer 1000 r/h inner panel in good order long shot i know
scot oiler
scot oiler
66
For Sale & Wanted / FLOGGIN STUFF
« on: 09 September 2014, 06:01:27 pm »
http://www.ebay.co.uk/itm/321510933274?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
http://www.ebay.co.uk/itm/321510937917?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
http://www.ebay.co.uk/itm/321510963575?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
http://www.ebay.co.uk/itm/321516221167?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
http://www.ebay.co.uk/itm/321510937917?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
http://www.ebay.co.uk/itm/321510963575?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
http://www.ebay.co.uk/itm/321516221167?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
67
For Sale & Wanted / Not bike related chevrolet kalos 1.4
« on: 05 September 2014, 02:42:27 pm »
Due to moving to bigger car to get me fishing gear in
1.4 16v
Mot
Tax runs out end sept
60k
some service history
2005 see model
Good all round used every day
Ideal for work or second car
Two niggles air con don't work
And passenger window goes up but not down
but does on drivers control panel
£950 or close offer car in bristol
07736008778
1.4 16v
Mot
Tax runs out end sept
60k
some service history
2005 see model
Good all round used every day
Ideal for work or second car
Two niggles air con don't work
And passenger window goes up but not down
but does on drivers control panel
£950 or close offer car in bristol
07736008778
68
Fazer 1000/FZ1 corner / bikes in for paint
« on: 27 August 2014, 08:43:19 pm »
bikes having a bit of a Devilsyam make over so had to add some bling wouldn't be me otherwise would it
69
For Sale & Wanted / fz1n s carbon can compamy exhaust
« on: 13 August 2014, 08:29:27 pm »road legal carbon can link pipe is for the n model will fit s but no center stand bump stop
good order £110 shipped uk
70
For Sale & Wanted / something different rf900
« on: 13 August 2014, 08:18:09 pm »l reg rf900 only 8000 miles yep thats all good order for 20 year old bike 12 months mot 6 month tax
£1695
72
Fazer 1000/FZ1 corner / gen 2 swinging arm
« on: 13 July 2014, 09:34:02 am »
anyone know the width at the pivot end (frame end)
73
For Sale & Wanted / gen 2 and fz8 frame plug
« on: 05 July 2014, 02:35:15 pm »
move over to gen2 bike and start doing stuff
so re made the famous frame plug from the gen 1 to suit the gen 2 (as there a lot different)
this will fit fz1 and fz8
Frame plug now ready for sale suit fz1 and fz8 cnc machined then black anodized with a similar yam logo engraved
plug is retained by O ring this is for the right side the bike only cannot be done for the left side see photo
also in polished finish
£20 posted
i only have 6 in black and 10 in polished
email devilsyam@gmail.com
so re made the famous frame plug from the gen 1 to suit the gen 2 (as there a lot different)
this will fit fz1 and fz8
Frame plug now ready for sale suit fz1 and fz8 cnc machined then black anodized with a similar yam logo engraved
plug is retained by O ring this is for the right side the bike only cannot be done for the left side see photo
also in polished finish
£20 posted
i only have 6 in black and 10 in polished
email devilsyam@gmail.com
74
For Sale & Wanted / ivans fuel cut eliminator for gen 2
« on: 05 July 2014, 10:20:44 am »
Cost 172 new removed from my bike as having ecu flashed
No instructions but I gave a link for fitting which is way better than the instructions
£100 posted
No instructions but I gave a link for fitting which is way better than the instructions
£100 posted