old - Fazer Owners Club - old

General => General => Topic started by: nsr500v4 on 13 September 2013, 08:36:47 pm

Title: R&G Bar Protectors
Post by: nsr500v4 on 13 September 2013, 08:36:47 pm

I have a set of the datatool heated grips to fit but the bike has R&G bar end protectors, how do these come off to let me? Thought i better check before i start ripping bits off!  :lol

Title: Re: R&G Bar Protectors
Post by: Dead Eye on 13 September 2013, 09:19:38 pm

If its on the stock bars then its just a bolt that holds the bar end and screws into a fixed "nut" inside the bar. Just undo the bolt in the centre of the bar end and it should come off with it :)

Title: Re: R&G Bar Protectors
Post by: nsr500v4 on 13 September 2013, 09:22:17 pm

I unscrewed the black nylon end and theres nowt else to unscrew! Only the hole the nylon end screws into!

Title: Re: R&G Bar Protectors
Post by: Dead Eye on 13 September 2013, 09:29:44 pm

Just realized you are on a Fazer 1000

Are they more like this; http://www.ebay.co.uk/itm/R-G-RACING-BAR-END-WEIGHTS-SLIDERS-YAMAHA-YZF-R125-2008-2012-/160793050303?pt=UK_Motorcycle_Parts_13&hash=item2570033cbf (http://www.ebay.co.uk/itm/R-G-RACING-BAR-END-WEIGHTS-SLIDERS-YAMAHA-YZF-R125-2008-2012-/160793050303?pt=UK_Motorcycle_Parts_13&hash=item2570033cbf)

If so, then the thread is part of the bar end which should just unscrew?

Title: Re: R&G Bar Protectors
Post by: nsr500v4 on 13 September 2013, 09:32:30 pm

AH, dead eye that makes sense, when the nylon end comes off its got 2 flats so obviously for a spanner to remove them, good man!

Title: Re: R&G Bar Protectors
Post by: Dead Eye on 13 September 2013, 11:24:20 pm

You're welcome :)

I'd done a little bit of research recently as I bought new bar ends for my Renthal bars - ended up using some Rawlplugs from B&Q to attach them ;)