Fazer Owners Club - Unofficial
Bikes, Hints'n'Tips => For Sale & Wanted => Topic started by: ChristoT on 10 September 2013, 06:47:58 pm
-
As all are probably aware, my Fazer 600 had a bit of a prang last weekend. And as I'm going to the US in October, I have no time (or money) to repair it. So, sadly, I have to break for spares.
The bike is currently with RED98, please post which parts you want below to confirm availability / existence. As a rule of thumb, if it's behind the bars, it's probably OK!
The engine and carbs are in good condition, but please allow a few days for the postal service to get the spare key to Red98!
Special/non stock parts for sale:
- Towbar (consider it a rear end safety device - will protect in rear end shunts, and save the rear fairing!). Heavy duty, and bolts straight on to an FZS600 (will need a Rentec rack, or the earlier grabrail): £200
- Stainless steel downpipes (for long footpegs). In decent condition, slight dent to middle pipe, purely cosmetic. £80
- Blueflame can and link pipe. Both clean, but a tad scruffy. Link pipe probably better suited for models with the shorter footrests. Will fit longer footrests with spacers. Baffles are currently removed, but will be included when they're found (I think they're either in the spares box in the trailer, or under the seat - will confirm). £40
- Rear hugger. Has a minor repair on the left hand side where it fixes to the bike. Apart from that, in reasonable condition. £20
- Rentec rack. A bit scruffy, but no visible dammage to it. Was happy lugging a 42L topbox down the motorway. Due to condition, would accept £30
- FAZER radiator guard. A rare model, I've only ever seen two like it. Mine, and one on a different project bike. Very sturdy, looks very nice. Stainless steel, I think. In excellent condition. Due to rarity and condition, £50
Sales of parts are paying off the insurance excess, and what's left will go towards a bike in the US, and travel costs.
-
Pipes dibs
Can pm me pics please?
Want the throttle side headlight plug too please
hi fizzy.....will take some pics tomorrow,weather/time permitting :) [size=78%] [/size]
-
I'd be interested in the speedo drive for cheaper than cheap!?
-
I'd be interested in the speedo drive for cheaper than cheap!?
You have PM
-
Interested in the exhaust ! Pics please . How much for posting or where are you to collect .
Adam
-
I'd be interested in the front forks....
(http://img.tapatalk.com/d/13/09/11/use5asub.jpg)
-
Interested in the exhaust ! Pics please . How much for posting or where are you to collect .
Adam
hi adam......fizzy has first dibs on the headers,can is still for sale,will take pics of both tonight and also check condition .
bike is in high wycombe,bucks jct 4 m40.......can post but will have to check postal charges first :)
-
I'd be interested in the front forks....
([url]http://img.tapatalk.com/d/13/09/11/use5asub.jpg[/url])
SOLD.......to EXUPNUT.....£500 the pair.......you can take them off yourself :lol
-
I'm only after the can and link pipe . Cheers Adam
-
I'm only after the can and link pipe . Cheers Adam
ok matey...i was a bit unsure :o ,will post pics tonight,weather permitting ;)
-
what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model
-
I'd be interested in the front forks....
([url]http://img.tapatalk.com/d/13/09/11/use5asub.jpg[/url])
SOLD.......to EXUPNUT.....£500 the pair.......you can take them off yourself :lol
A definite upgrade for a slow blue bike :rollin
-
what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model
It was a 2000 model. Just so you know, I've had some large pillion passengers, so there are a few little cracks in the aluminum.
-
How much for the headlight unit?
-
what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model
It was a 2000 model. Just so you know, I've had some large pillion passengers, so there are a few little cracks in the aluminum.
cheers m8 - i think the hangers are different on the 2003 model. will keep looking
-
what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model
It was a 2000 model. Just so you know, I've had some large pillion passengers, so there are a few little cracks in the aluminum.
cheers m8 - i think the hangers are different on the 2003 model. will keep looking
No, they're the longer ones, therefore the right ones. The only thing to worry about is the crack (as mentionned)
-
How much for the headlight unit?
The front headlight unit is in various pieces. Not for sale as it's too damaged to salvage - sorry.
-
what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model
It was a 2000 model. Just so you know, I've had some large pillion passengers, so there are a few little cracks in the aluminum.
will try and post some pics tonight,weather permitting ;)
cheers m8 - i think the hangers are different on the 2003 model. will keep looking
No, they're the longer ones, therefore the right ones. The only thing to worry about is the crack (as mentionned)
-
I'd be interested in the tank if its not buggered. Can collect.
Cheers
(Told you to break it weeks ago :lol )
-
How much for the headlight unit?
The front headlight unit is in various pieces. Not for sale as it's too damaged to salvage - sorry.
Depends on what I want it for!
Are the reflectors intact? If they are and the price is right, I don't mind taking the broken unit and taking them out myself.
-
I'd be interested in the tank if its not buggered. Can collect.
Cheers
(Told you to break it weeks ago :lol )
Memory says the tank is OK, but RED98 will have to confirm. Fuel level may vary from half full to empty (depending on Mr 98's speed with a spare fuel hose and his own fuel tank...) ;) ;)
There is a slight repair to the right hand side (two small dents were filled with body filler months ago). If that is the only damage - £50?
-
I'm only after the can and link pipe . Cheers Adam
hi stinch...couple of pictures,a few marks and a couple of dents,a rub mark where the straps been,the inlet pipe is loose on the silencer might have to drill the rivets out ,fix the pipe and re-rivet....hope this helps
-
I'd be interested in the tank if its not buggered. Can collect.
Cheers
(Told you to break it weeks ago :lol )
Memory says the tank is OK, but RED98 will have to confirm. Fuel level may vary from half full to empty (depending on Mr 98's speed with a spare fuel hose and his own fuel tank...) ;) ;)
There is a slight repair to the right hand side (two small dents were filled with body filler months ago). If that is the only damage - £50?
noticed a big deep dent whilst loading :\ ....pi**ing down here,will try and get a pic tomorrow ;) [size=78%] [/size]
-
How much for the headlight unit?
The front headlight unit is in various pieces. Not for sale as it's too damaged to salvage - sorry.
Depends on what I want it for!
Are the reflectors intact? If they are and the price is right, I don't mind taking the broken unit and taking them out myself.
i`ll have a closer look when it stops raining...might be doable ;)
-
Cheers for the pics . Has it got the link pipe ? Adam
-
Cheers for the pics . Has it got the link pipe ? Adam
yes got link pipe but still on bike and its pi**ing down.....will try and get piccie tomorrow ;)
-
.
-
.
ok....i think i`ve kept you waiting long enough,.......for sale tow bar for box eye 600 fazer,custom made and hardly used ( sorry christo)
-
whats rear tyre like paul?
-
whats rear tyre like paul?
hi clive.......dark and wet here.....will have a look tomorrow ;) ...........do you want to buy a towbar :D
-
whats rear tyre like paul?
hi clive.......dark and wet here.....will have a look tomorrow ;) ...........do you want to buy a towbar :D
.....mmmm?..let me think now?.....NO :D
-
what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model
It was a 2000 model. Just so you know, I've had some large pillion passengers, so there are a few little cracks in the aluminum.
will try and post some pics tonight,weather permitting ;)
cheers m8 - i think the hangers are different on the 2003 model. will keep looking
No, they're the longer ones, therefore the right ones. The only thing to worry about is the crack (as mentionned)
sorry lazarus....no piccies tonight, too much rain :(
-
whats rear tyre like paul?
hi clive.......dark and wet here.....will have a look tomorrow ;) ...........do you want to buy a towbar :D
.....mmmm?..let me think now?.....NO :D
ah...ok....i can see your a bit unsure,sleep on it and i`ll ask you again tomorrow :lol
-
oh ok?, they will be owt my price range then? :\
-
front and rear are almost new Michelin PR3's
thanks for the info FIZZY.................do you want to buy a towbar ?
-
you getting commision on that bloody towbar paul?.....ide a thought cristo would have took it with him as a momento? :rolleyes
-
It's like being an organ donor, parts of your bike will live on!
-
you getting commision on that bloody towbar paul?.....ide a thought cristo would have took it with him as a momento? :rolleyes
they would`nt let him take it onboard as it might get mixed up with the real boat anchor :lol
-
I could be interested in the tyres. What sizes (hoping for stock) and price for both? Having read about about the dented rims, I'll be happy to take than as is and remove the tyres myself.
And NO, I don't want tow bar! : D
-
No use for it, he won't sell me that trailer!
ah...ok......well i can see your keen so i`ll have a word with him and see if we can through the trailer in as well ;) .......cash no cheques :lol
-
you getting commision on that bloody towbar paul?.....ide a thought cristo would have took it with him as a momento? :rolleyes
they would`nt let him take it onboard as it might get mixed up with the real boat anchor :lol
..... :lol :lol :lol :lol :lol :lol ....
-
I could be interested in the tyres. What sizes (hoping for stock) and price for both? Having read about about the dented rims, I'll be happy to take than as is and remove the tyres myself.
And NO, I don't want tow bar! : D
i`ll have a look tomorrow for size,christo will give you a price ;) ..........are you sure you dont want to buy a towbar [size=78%]?...be quick i`ve got lots of people interested[/size]
-
.....are the front discs any good?
-
.....are the front discs any good?
front end has taken a battering,might be lucky with the disc`s....i`ll have a look tomorrow .......going to be a busy day :rolleyes
do you want to buy a towbar :lol
-
.....are the front discs any good?
front end has taken a battering,might be lucky with the disc`s....i`ll have a look tomorrow .......going to be a busy day :rolleyes
do you want to buy a towbar :lol
...F..................O........................C...............................K...OFF............ :rollin :rollin :rollin :rollin :rollin :rollin :rollin :rollin
-
photo of hugger if still available?
what else is left?
-
The tyres are both Michelin Pilot Road 3s, barely done 1,000 miles. Front looked a bit buggered at the scene (looked like a stone had got between the rim and the tyre), but it may be OK on closer inspection. If it is, £120 for the pair? If not, I'd take £70 for the rear.
That towbar WILL save your bike should an old biddy rear end you - happened to a friend, he reckons he would have dropped the bike had it not been fitted. And if your bike were to fall over, it save your rear faring (as I can attest). Consider it a safety device!! There is a standard car electric plug too - Red98 will be able to remove it, and join it to the towbar when the spare key gets there!! It's a bargain, it cost closer to £300 to have the bloody thing built, as it is very heavy duty, plasma cut steel. It bolts on (yes, all bolts) in 5 minutes. Means you can tow a small car trailer 2m long by 1m wide, and weighing 150kg when loaded. The way to show off the track bike when arriving at a trackday!!
Hugger is still available.
If discs are OK (they're half worn, mind, but I don;t think they're warped)- the pair for £80?
Fizzy - just for you, I'll sell you the trailer for £500 - and throw in the towbar for free. Collection from France. :lol :lol :lol
-
How much are you after for the carburettors?
-
How much are you after for the carburettors?
Probably not much more than £60 - but I'd like to keep them nearish the bike until the engine sells to prove the engine is in good working order. Be advised they have a 33bhp restrictor in, and may need a bit of fettling to get them back up to par (balancing at the very least).
Red98 is probably a better man to talk to on that front!
-
Pipes dibs
Can pm me pics please?
Want the throttle side headlight plug too please
.
-
Pipes dibs
Can pm me pics please?
Want the throttle side headlight plug too please
.hi fizzy.......pipes look good with a few small marks,will polish up well ;)
-
I'd be interested in the speedo drive for cheaper than cheap!?
hi stigy..........it put up a bit of a fight,but got it out in one bit.......lugs good :thumbup
-
I'd be interested in the front forks....
([url]http://img.tapatalk.com/d/13/09/11/use5asub.jpg[/url])
hi exupnut....removed the forks for you...no damage and in near new condition,how do you want to pay :)
.
-
what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model
hi lazarus....this what your after....does have a very very small crack,hard to see,needs a good clean/polish as ex-student owner :rolleyes
.
-
How much for the headlight unit?
hi jamieg285.......hope the pictures help...will know more about condition when i take the unit out,should be this weekend ;)
.
-
How much for the headlight unit?
hi jamieg285.......hope the pictures help...will know more about condition when i take the unit out,should be this weekend ;)
.
.
-
Lol they look like fzs antlers. Such a sad thread. Boohoo. Waaaaaaaaaaaaaaaaa
(http://img.tapatalk.com/d/13/09/13/ata2adus.jpg)
Time fer a beer and a reminisce....
(http://img.tapatalk.com/d/13/09/13/myna8apu.jpg)
(http://img.tapatalk.com/d/13/09/13/me2e8eha.jpg)
Waaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Burp!
-
I'd be interested in the tank if its not buggered. Can collect.
Cheers
(Told you to break it weeks ago :lol )
hi frosties......its taken a bit of a battering,not leaking though :D
.
-
what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model
hi lazarus....this what your after....does have a very very small crack,hard to see,needs a good clean/polish as ex-student owner :rolleyes
.
yes m8 - think ill wait for another to come along. mines been down the road and still looks in better nick than that :D :D :D .
besides, with all that extra muck on it, will cost a fortune to post :D .
-
I'd be interested in the front forks....
([url]http://img.tapatalk.com/d/13/09/11/use5asub.jpg[/url])
hi exupnut....removed the forks for you...no damage and in near new condition,how do you want to pay :)
.
Can't make his bike any slower!! :rollin :rollin :rollin :rollin
-
what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model
hi lazarus....this what your after....does have a very very small crack,hard to see,needs a good clean/polish as ex-student owner :rolleyes
.
yes m8 - think ill wait for another to come along. mines been down the road and still looks in better nick than that :D :D :D .
besides, with all that extra muck on it, will cost a fortune to post :D .
Pfft! Just needs a clean!
Anyway, I gave you fair warning. :b
-
what year was it ChristoT? looking for a LHS rear footpeg & hanger for 2003 model
hi lazarus....this what your after....does have a very very small crack,hard to see,needs a good clean/polish as ex-student owner :rolleyes
.
yes m8 - think ill wait for another to come along. mines been down the road and still looks in better nick than that :D :D :D .
besides, with all that extra muck on it, will cost a fortune to post :D .
:lol :lol :lol :lol :lol ....french,student.lodger......i`ll say no more :lol
-
Pfft! Just needs a clean!
Anyway, I gave you fair warning. :b
aye mate you did!! glad you can still see the funny side.
-
thats your lot for tonight,been a long day :\ .......still need to take pictures of link pipe,tyres and discs so if ive missed you tonight iam sorry,i have not forgotten you though :)
hey exupnut.........when you going to pay for the forks :lol :lol :lol :lol
-
Pfft! Just needs a clean!
Anyway, I gave you fair warning. :b
aye mate you did!! glad you can still see the funny side.
So I still get your money? :evil :lol
-
Pfft! Just needs a clean!
Anyway, I gave you fair warning. :b
aye mate you did!! glad you can still see the funny side.
So I still get your money? :evil :lol
not tonight m8. looking for one in as good a nick as mine was
(http://foc-u.co.uk/MGalleryItem.php?id=832)
-
I'd be interested in the tank if its not buggered. Can collect.
Cheers
(Told you to break it weeks ago :lol )
hi frosties......its taken a bit of a battering,not leaking though :D
.
I believe we call that buggered. However: If it ain't leaking, it might be repairable!
This vid may be of use: 4 ways to pop a dent from a motorcycle gas tank (http://www.youtube.com/watch?v=qkbFhPrJ14w#ws)
Frosties, if you're still interested, it's yours for £15.
-
thats your lot for tonight,been a long day :\ .......still need to take pictures of link pipe,tyres and discs so if ive missed you tonight iam sorry,i have not forgotten you though :)
hey exupnut.........when you going to pay for the forks :lol :lol :lol :lol
Hey Exup, if you want part ex me your bike for them, you only owe me £499.99! :lol
-
Red98 I sent you a pm dunno if you got it ? Adam
-
sorry adam ,i missed your pm :o .....pm sent ......paul aka red98
-
Interested in the pipes, will they be a straight replacement for my W reg fzs600 pipes? As mine are looking a little funky
-
Interested in the pipes, will they be a straight replacement for my W reg fzs600 pipes? As mine are looking a little funky
Yep, should be a straight fit. You *do* have the longer footrests fitted, right? If so, should be fine! :)
If not, still fine, buy mine too! :lol
-
Quick update:
No parts confirmed as sold yet.
Bike parts that don't sell are going on ebay on the 10th of October, then are going to a scrappers.
You've been warned!
Rear faring and light unit still OK, BTW. And a very comfy seat too!! Rear shock is stock, and in good nick.
-
Interested in the pipes, will they be a straight replacement for my W reg fzs600 pipes? As mine are looking a little funky
Yep, should be a straight fit. You *do* have the longer footrests fitted, right? If so, should be fine! :)
If not, still fine, buy mine too! :lol
Ermmmm pass.... no idea what footrests i have. Am new to all this bike malarky :)
-
Interested in the pipes, will they be a straight replacement for my W reg fzs600 pipes? As mine are looking a little funky
Yep, should be a straight fit. You *do* have the longer footrests fitted, right? If so, should be fine! :)
If not, still fine, buy mine too! :lol
Ermmmm pass.... no idea what footrests i have. Am new to all this bike malarky :)
Sounds like your bike is a 2000 model, ergo identical to mine (i.e, longer footrests). So the pipes should be a straight fit.
To be fair, they would fit on the older models too, but getting the end can on might be a bit of a pig on the shorter pegs.
-
I'd be interested in the tank if its not buggered. Can collect.
Cheers
(Told you to break it weeks ago :lol )
hi frosties......its taken a bit of a battering,not leaking though :D
.
I believe we call that buggered. However: If it ain't leaking, it might be repairable!
This vid may be of use: 4 ways to pop a dent from a motorcycle gas tank ([url]http://www.youtube.com/watch?v=qkbFhPrJ14w#ws[/url])
Frosties, if you're still interested, it's yours for £15.
Thanks but as its worse than mine I'll pass this time. Will wait for your next one :lol
Would also need a feckin big hair dryer to get your dents out........................like hold it behind a 747 when it wind up for take off :rollin
Is the towbar still for sale?
-
I'd be interested in the tank if its not buggered. Can collect.
Cheers
(Told you to break it weeks ago :lol )
hi frosties......its taken a bit of a battering,not leaking though :D
.
I believe we call that buggered. However: If it ain't leaking, it might be repairable!
This vid may be of use: 4 ways to pop a dent from a motorcycle gas tank ([url]http://www.youtube.com/watch?v=qkbFhPrJ14w#ws[/url])
Frosties, if you're still interested, it's yours for £15.
Thanks but as its worse than mine I'll pass this time. Will wait for your next one :lol
Would also need a feckin big hair dryer to get your dents out........................like hold it behind a 747 when it wind up for take off :rollin
Is the towbar still for sale?
Indeed it is!
-
How about the rear brake caliper - is it for sale? What's the condition? How much would you want for it?
-
How about the rear brake caliper - is it for sale? What's the condition? How much would you want for it?
It is!
Condition - dirty, but decent. The pads still have some material on, but the caliper may need an overhaul (certainly a clean!) when new pads go on.
Call it £15 (with the pads)?
-
Wonderful, I'll take it then :) I'll PM you to discuss payment and shipping.
-
What are the front calipers like Cristo?,they been overhauled recently?
-
What are the front calipers like Cristo?,they been overhauled recently?
They were given a good clean when I had new pads fitted! I can't remember an overhaul, but don't know if they need them. Pads still have maybe a quarter of the original friction material on?
Their condition may be dubious due to the way to forks were mutilated by the Mitsubishi. I'll have to let Red98 get back to you on those.
-
I'd be interested in the tank if its not buggered. Can collect.
Cheers
(Told you to break it weeks ago :lol )
hi frosties......its taken a bit of a battering,not leaking though :D
.
I believe we call that buggered. However: If it ain't leaking, it might be repairable!
This vid may be of use: 4 ways to pop a dent from a motorcycle gas tank ([url]http://www.youtube.com/watch?v=qkbFhPrJ14w#ws[/url])
Frosties, if you're still interested, it's yours for £15.
Thanks but as its worse than mine I'll pass this time. Will wait for your next one :lol
Would also need a feckin big hair dryer to get your dents out........................like hold it behind a 747 when it wind up for take off :rollin
Is the towbar still for sale?
Indeed it is!
Ahhh ok......just curious :lol
-
What are the front calipers like Cristo?,they been overhauled recently?
They were given a good clean when I had new pads fitted! I can't remember an overhaul, but don't know if they need them. Pads still have maybe a quarter of the original friction material on?
Their condition may be dubious due to the way to forks were mutilated by the Mitsubishi. I'll have to let Red98 get back to you on those.
No rush, i dont actually need any but could be handy having a spare set to recon, if they are cheap enough & nobody else proper needs them then i could be interested.
Cheers
-
If christo won the lottery....
(http://img.tapatalk.com/d/13/09/15/a4etahe5.jpg)
-
How much are you after for the carburettors?
Probably not much more than £60 - but I'd like to keep them nearish the bike until the engine sells to prove the engine is in good working order. Be advised they have a 33bhp restrictor in, and may need a bit of fettling to get them back up to par (balancing at the very least).
Red98 is probably a better man to talk to on that front!
Any idea if it's possible to remove the restrictors without buggering up the seals?
I'll take them but not in any rush, so whenever the engine has gone.
-
How much are you after for the carburettors?
Probably not much more than £60 - but I'd like to keep them nearish the bike until the engine sells to prove the engine is in good working order. Be advised they have a 33bhp restrictor in, and may need a bit of fettling to get them back up to par (balancing at the very least).
Red98 is probably a better man to talk to on that front!
Any idea if it's possible to remove the restrictors without buggering up the seals?
I'll take them but not in any rush, so whenever the engine has gone.
Yes, I've done it myself (for all of 3 days). I mean, the buggers went in!! :lol
You just take the caps off the carbs, pull out spings, the diaphrams and needle bodies, put the stock springs and stock needles in place, then reassemble minus the plates. Simples! 8)
-
.....are the front discs any good?
hi clive....just had a look at the discs....well and truly mullered,looks like they took the brunt of the impact,sorry mate ......but on the plus side i have a very nice TOWBAR for sale
-
How much are you after for the carburettors?
Probably not much more than £60 - but I'd like to keep them nearish the bike until the engine sells to prove the engine is in good working order. Be advised they have a 33bhp restrictor in, and may need a bit of fettling to get them back up to par (balancing at the very least).
Red98 is probably a better man to talk to on that front!
Any idea if it's possible to remove the restrictors without buggering up the seals?
I'll take them but not in any rush, so whenever the engine has gone.
hi lawrence....waiting for the key to arrive and then i can get the old girl running and check the engine and carbs out...want to sell the engine first so buyer can see it running,one think you cant do with a breakers yard,will let you know soon....cheers paul aka red98
-
.....are the front discs any good?
hi clive....just had a look at the discs....well and truly mullered,looks like they took the brunt of the impact,sorry mate ......but on the plus side i have a very nice TOWBAR for sale
...hi, paul never mind mate !....a towbar you say?.....just wished ude mentioned it earlier? :eek .....went out this morning and bought one?.....£10..including ball and lecies!!.... :rolleyes ....ps?....who,s dolly????????????????...
-
What are the front calipers like Cristo?,they been overhauled recently?
They were given a good clean when I had new pads fitted! I can't remember an overhaul, but don't know if they need them. Pads still have maybe a quarter of the original friction material on?
Their condition may be dubious due to the way to forks were mutilated by the Mitsubishi. I'll have to let Red98 get back to you on those.
No rush, i dont actually need any but could be handy having a spare set to recon, if they are cheap enough & nobody else proper needs them then i could be interested.
Cheers
hi noggy....if its dry tomorrow after work ill have a look at the calipers,check operation and inspect the pistons,will post some pictures tomorrow night....cheers paul aka red98
-
.....are the front discs any good?
hi clive....just had a look at the discs....well and truly mullered,looks like they took the brunt of the impact,sorry mate ......but on the plus side i have a very nice TOWBAR for sale
...hi, paul never mind mate !....a towbar you say?.....just wished ude mentioned it earlier? :eek .....went out this morning and bought one?.....£10..including ball and lecies!!.... :rolleyes ....ps?....who,s dolly????????????????...
[/size]
[/size]
[/size][size=78%]getting popular these towbars,now you have one it makes sense to buy another one for spares [/size] :D ....."who`s dolly"......give me a little while i`ll work this out,iam knocking on a bit.....is it something to do with ade .........
-
.....are the front discs any good?
hi clive....just had a look at the discs....well and truly mullered,looks like they took the brunt of the impact,sorry mate ......but on the plus side i have a very nice TOWBAR for sale
...hi, paul never mind mate !....a towbar you say?.....just wished ude mentioned it earlier? :eek .....went out this morning and bought one?.....£10..including ball and lecies!!.... :rolleyes ....ps?....who,s dolly????????????????...
[size=78%]getting popular these towbars,now you have one it makes sense to buy another one for spares [/size] :D ....."who`s dolly"......give me a little while i`ll work this out,iam knocking on a bit.....is it something to do with ade .........
....chk out approachin 40 in general?.... :rolleyes nowt t do with me mate!! :eek
-
Thanks Paul, i know you know what youre looking at.
Calipers are something i havent touched yet so it would be interesting to learn a bit about them from all the threads on foc-u & have a set to play with since im now too old for Lego, if they need allot of work i might be outta my depth so hopefully the impact didnt trash them.
-
Hi mate, do you have the rear shock? How much you want for it if you do?
-
Hi mate, do you have the rear shock? How much you want for it if you do?
Hello!
I do indeed - stock, but in good condition. Still works, without Captain Kangaroo'ing me down the road! :lol
Does £50 sound reasonable?
-
quote author=CRH link=topic=9823.msg101593#msg101593 date=1379269533]
.....are the front discs any good?
hi clive....just had a look at the discs....well and truly mullered,looks like they took the brunt of the impact,sorry mate ......but on the plus side i have a very nice TOWBAR for sale
...hi, paul never mind mate !....a towbar you say?.....just wished ude mentioned it earlier? :eek .....went out this morning and bought one?.....£10..including ball and lecies!!.... :rolleyes ....ps?....who,s dolly????????????????...
[size=78%]getting popular these towbars,now you have one it makes sense to buy another one for spares [/size] :D ....."who`s dolly"......give me a little while i`ll work this out,iam knocking on a bit.....is it something to do with ade .........
....chk out approachin 40 in general?.... :rolleyes nowt t do with me mate!! :eek
Hey Paul, it's me, you know, from "Buxom Babes" forum?! How can you have forgotten Dolly? I thought I'd never seen Ms Parton in a sheepskin coat before!
Thanks Paul, i know you know what youre looking at.
Calipers are something i havent touched yet so it would be interesting to learn a bit about them from all the threads on foc-u & have a set to play with since im now too old for Lego, if they need allot of work i might be outta my depth so hopefully the impact didnt trash them.
[
Noggy, they're the things you're supposed to use to stop - you know, before you crash?
-
I could be interested in the tyres. What sizes (hoping for stock) and price for both? Having read about about the dented rims, I'll be happy to take than as is and remove the tyres myself.
And NO, I don't want tow bar! : D
i`ll have a look tomorrow for size,christo will give you a price ;) ..........are you sure you dont want to buy a towbar [size=78%]?...be quick i`ve got lots of people interested[/size]
Any word on the front tyre condition yet? And headlight reflectors?
-
He He Nick, that's the trouble, they're damn fine brakes...fine enough to lock up under panic stations, i wish i'd just hit the 4x4 but then again my forks woulda been bent then.(p.s sorry to all the Honda CRV owners who have had stares of death since :2guns )
the new me is coming soon, complete with knowledge about falling off & how much it hurts! :)
-
£50 is a fair price but a frying scotsman has offered to lend me a shock for a few weeks so I'm sorted now thanks. Sorry to mess you about
-
I could be interested in the tyres. What sizes (hoping for stock) and price for both? Having read about about the dented rims, I'll be happy to take than as is and remove the tyres myself.
And NO, I don't want tow bar! : D
i`ll have a look tomorrow for size,christo will give you a price ;) ..........are you sure you dont want to buy a towbar [size=78%]?...be quick i`ve got lots of people interested[/size]
Any word on the front tyre condition yet? And headlight reflectors?
hi jamieg.....sorry for taking so long,should have the wheels and headlight off tonight :) ...have had a quick look at the tyres and they look very good and as already mentioned only 1000 miles old.....will pm you and also post pictures tonight ....cheers paul aka red98
-
Hi what seat have you got on bike ? If a custom seat how much ?
-
is the towbar still available?
-
Hi what seat have you got on bike ? If a custom seat how much ?
standard seat mate.....be a good spare for diy alteration ;) think i have some moulded foam somewhere i could through in :)
-
Hi what seat have you got on bike ? If a custom seat how much ?
standard seat mate.....be a good spare for diy alteration ;) think i have some moulded foam somewhere i could through in :)
USe your own seat for the altering! The stock on my bike is the comfiest / least worn or ropey of any other Fazer 600 I've seen. Previous owner was a girl, must have been a slip of a thing, the seat felt barely used when I got on the bike.
£30.
-
How much is exup giving you for the forks?
Ive watched storage hunters a million times...when you bid...you buy :deal
Cough up exup & send us a pic of you with them to prove how much you care about poor students.
All around the globe poor foccers are starving & falling over :eek
Have a heart!....help a Cristo!!! :D
-
How much is exup giving you for the forks?
Ive watched storage hunters a million times...when you bid...you buy :deal
Cough up exup & send us a pic of you with them to prove how much you care about poor students.
All around the globe poor foccers are starving & falling over :eek
Have a heart!....help a Cristo!!! :D
Same goes to you, Nog? I still have 95% of a bike to sell! Make me a ridiculously overinflated offer on something, or stop taking the piss out of squirrelhead! :lol
As for the forks, Exup hasn't paid - I'll give you first offer, Nog - a steal at £499,99!!
PS: Buy my towbar.
-
He he, shamone muthafocca!!!! :b
Well i'll make a pledge to buy something, not sure what yet since you don't crash in half measures but ill think of somethin
-
He he, shamone muthafocca!!!! :b
Well i'll make a pledge to buy something, not sure what yet since you don't crash in half measures but ill think of somethin
If it's behind the tank, it's fine. Simples. Now... :deal
-
If you feel left out from all this selling of forks, I have two bent fork inners that people are welcome to purchase :D
-
How about the rear brake caliper - is it for sale? What's the condition? How much would you want for it?
hi lardcore...bad news sorry,took the caliper off this evening,outer piston fine no pitting,inner seized solid :'( sorry to let you down....paul
-
What are the front calipers like Cristo?,they been overhauled recently?
hi noggy....got the front calipers off tonight...look good.all 8 pistons move freely and what looks like fairly new pads.imo good enough to use as is :-)
-
How about the rear brake caliper - is it for sale? What's the condition? How much would you want for it?
hi lardcore...bad news sorry,took the caliper off this evening,outer piston fine no pitting,inner seized solid :'( sorry to let you down....paul
I know a trick for seized callipers that works better than compressed air - a grease gun.
Hold in the working piston with molegrips (and bits of wood to protect the metal, obviously), screw the greasegun end onto the bleed nipple and pump. The calliper will fill with grease, and the piston should slide out, easy as you please.
-
Cheers Paul, you're flat out on this thread fair play.i bet your missus loves your new :faz garden ornaments,
Come on Cristo....its about time you got some sales isnt it, get yur finger out...how cheap are they???. :b
-
How much for the headlight unit?
The front headlight unit is in various pieces. Not for sale as it's too damaged to salvage - sorry.
Depends on what I want it for!
j
Are the reflectors intact? If they are and the price is right, I don't mind taking the broken unit and taking them out myself.
hi jamieg.....reflectors and lens good.bulb shield loose.
-
Cheers Paul, you're flat out on this thread fair play.i bet your missus loves your new :faz garden ornaments,
Come on Cristo....its about time you got some sales isnt it, get yur finger out...how cheap are they???. :b
How cheap's what? Whaddya want, Nogster? :D
-
How about the rear brake caliper - is it for sale? What's the condition? How much would you want for it?
hi lardcore...bad news sorry,took the caliper off this evening,outer piston fine no pitting,inner seized solid :'( sorry to let you down....paul
I know a trick for seized callipers that works better than compressed air - a grease gun.
Hold in the working piston with molegrips (and bits of wood to protect the metal, obviously), screw the greasegun end onto the bleed nipple and pump. The calliper will fill with grease, and the piston should slide out, easy as you please.
That seems like such a horrific idea! Why would you subject your caliper internals to grease, you'll never get all of the bloody stuff back out. If you don't have access to compressed air, then use the brake fluid! Clamp one side using a G-clamp with some cardboard to protect the metal surfaces and just pump out the other side. Tidy it up, replace everything and repeat - just need some extra brake fluid and bleeding brakes really isn't a difficult job
-
Cheers Paul, you're flat out on this thread fair play.i bet your missus loves your new :faz garden ornaments,
Come on Cristo....its about time you got some sales isnt it, get yur finger out...how cheap are they???. :b
How cheap's what? Whaddya want, Nogster? :D
Come on, keep up...them there Caliper things,red says they function, did exup pinch the Blue off one o them???
-
Cheers Paul, you're flat out on this thread fair play.i bet your missus loves your new :faz garden ornaments,
Come on Cristo....its about time you got some sales isnt it, get yur finger out...how cheap are they???. :b
you have the same trouble :lol ...it is causing a bit of friction with mrs red :rolleyes ...3 bikes and my classic bmw in the garage,my suzuki in the shed,my second 600 fazer down the side of the house and christos bike on the trailer on the drive......and to cap it all mrs red had an accident in my golf today,,yr 2000 with only 36.000 on the clock....think it might be a write off :'(
-
does it have a towbar? :lol
-
Cheers Paul, you're flat out on this thread fair play.i bet your missus loves your new :faz garden ornaments,
Come on Cristo....its about time you got some sales isnt it, get yur finger out...how cheap are they???. :b
you have the same trouble :lol ...it is causing a bit of friction with mrs red :rolleyes ...3 bikes and my classic bmw in the garage,my suzuki in the shed,my second 600 fazer down the side of the house and christos bike on the trailer on the drive......and to cap it all mrs red had an accident in my golf today,,yr 2000 with only 36.000 on the clock....think it might be a write off :'(
A friend of mine told me he'd pranged his car today as well! What the foc is going on with friends of mine and crashing?!? :eek
Red - if it appeases Mrs Red, tell her I'll bring her a bottle of French wine before heading to the US if the bike sells some more.
-
Cheers Paul, you're flat out on this thread fair play.i bet your missus loves your new :faz garden ornaments,
Come on Cristo....its about time you got some sales isnt it, get yur finger out...how cheap are they???. :b
you have the same trouble :lol ...it is causing a bit of friction with mrs red :rolleyes ...3 bikes and my classic bmw in the garage,my suzuki in the shed,my second 600 fazer down the side of the house and christos bike on the trailer on the drive......and to cap it all mrs red had an accident in my golf today,,yr 2000 with only 36.000 on the clock....think it might be a write off :'(
A friend of mine told me he'd pranged his car today as well! What the foc is going on with friends of mine and crashing?!? :eek
Red - if it appeases Mrs Red, tell her I'll bring her a bottle of French wine before heading to the US if the bike sells some more.
its my car in my name and insurance,so i have the pleasure in sorting it out :\ however it does mean that mrs red cant do enough for me at the moment ;) ;) ....not going to use it to my advantage though as iam just not like that :rolleyes :rolleyes :rolleyes :rolleyes ......nice offer christo,she would like that........got to be RED though :lol :lol :lol
-
@ JAMIEG.....tyres look good and at 1000 miles just scrubbed in.....front wheel is off the bike, rear still on and bike on trailer.all being well tonight i`ll take the bike off the trailer support the front end and remove the wheel,with no front end this is easier said than done :rolleyes ....will post pics later this evening
-
Sorry about the car Red, glad Mrs red ok & yes it's defo a chance to get another Red vehicle, may i suggest a nice Red Skoda like mine :)
-
Mornin Cristo!,wipe that sleep dust from your eyes & get back to businness.
How much for these calipers then buddy old chum? :)
-
Sorry about the car Red, glad Mrs red ok & yes it's defo a chance to get another Red vehicle, may i suggest a nice Red Skoda like mine :)
oh.......you own a skoda then :lol :lol :lol :lol :lol :lol :lol
-
Mornin Cristo!,wipe that sleep dust from your eyes & get back to businness.
How much for these calipers then buddy old chum? :)
give him a chance noggy....hes a student and its only 10am :rolleyes
-
How much are you after for the carburettors?
Probably not much more than £60 - but I'd like to keep them nearish the bike until the engine sells to prove the engine is in good working order. Be advised they have a 33bhp restrictor in, and may need a bit of fettling to get them back up to par (balancing at the very least).
Red98 is probably a better man to talk to on that front!
Any idea if it's possible to remove the restrictors without buggering up the seals?
I'll take them but not in any rush, so whenever the engine has gone.
hi lawrence....waiting for the key to arrive and then i can get the old girl running and check the engine and carbs out...want to sell the engine first so buyer can see it running,one think you cant do with a breakers yard,will let you know soon....cheers paul aka red98
Just thought, is the restrictor just plates, or is it jets too?
-
Sorry about the car Red, glad Mrs red ok & yes it's defo a chance to get another Red vehicle, may i suggest a nice Red Skoda like mine :)
oh.......you own a skoda then :lol :lol :lol :lol :lol :lol :lol
& a fazer 1400 :rolleyes ,only one in the world :lol
-
is the towbar still available?
?
-
How much are you after for the carburettors?
Probably not much more than £60 - but I'd like to keep them nearish the bike until the engine sells to prove the engine is in good working order. Be advised they have a 33bhp restrictor in, and may need a bit of fettling to get them back up to par (balancing at the very least).
Red98 is probably a better man to talk to on that front!
Any idea if it's possible to remove the restrictors without buggering up the seals?
I'll take them but not in any rush, so whenever the engine has gone.
hi lawrence....waiting for the key to arrive and then i can get the old girl running and check the engine and carbs out...want to sell the engine first so buyer can see it running,one think you cant do with a breakers yard,will let you know soon....cheers paul aka red98
Just thought, is the restrictor just plates, or is it jets too?
[/quote
WAKE UP CHRISTO..........do you still have all the standard parts to return the carbs too full power ?
-
is the towbar still available?
?
towbar still available,but lots of interest.....submit your best offer and who knows you might be the next owner of a peice of FAZER history ;)
-
Sorry about the car Red, glad Mrs red ok & yes it's defo a chance to get another Red vehicle, may i suggest a nice Red Skoda like mine :)
oh.......you own a skoda then :lol :lol :lol :lol :lol :lol :lol
& a fazer 1400 :rolleyes ,only one in the world :lol
you got inside information ?....theres a fazer 1400......would explain why they bought out the fz8.....got any piccies ?
-
hey paul?...is the chain any good?...lads just been given a old bandit with no chain?...and its the same?...530x110
-
hi clive....hoping to get the back wheel out tonight,so will have a look......dont build your hopes up though most of the parts i`ve looked at are not up to much :rolleyes ......CHRISTO do you know how old the chain is ?
-
ok mate thanks for that?...if you think its serviceable and he doesnt want much for it? :rolleyes ....ile take it!!
-
ah just had a thought.......to save on postage i`ll wrap it with the towbar... :lol ..sold...
-
ah just had a thought.......to save on postage i`ll wrap it with the towbar... :lol ..sold...
....what?...ya mean you havnt sold it yet? :eek ....dont see why not?....absolute bargain for..£20.... ;)
-
In addition to carbs, what state is the rear disk in?
-
hi jamieg.....reflectors and lens good.bulb shield loose.
Looks good to me. I only want the reflectors though, the lens is of no use to me.
Are you available for me to pick them up Friday (this one or next)? I can come to you after I leave work. What time can you be available from?
-
@ JAMIEG.....tyres look good and at 1000 miles just scrubbed in.....front wheel is off the bike, rear still on and bike on trailer.all being well tonight i`ll take the bike off the trailer support the front end and remove the wheel,with no front end this is easier said than done :rolleyes ....will post pics later this evening
Can you confirm the sizes?
What's the deal with payment? Pay you or ChristoT?
-
hi jamieg.....reflectors and lens good.bulb shield loose.
Looks good to me. I only want the reflectors though, the lens is of no use to me.
Are you available for me to pick them up Friday (this one or next)? I can come to you after I leave work. What time can you be available from?
fridays good for me....usually home by 7.30 pm every friday...
-
@ JAMIEG.....tyres look good and at 1000 miles just scrubbed in.....front wheel is off the bike, rear still on and bike on trailer.all being well tonight i`ll take the bike off the trailer support the front end and remove the wheel,with no front end this is easier said than done :rolleyes ....will post pics later this evening
Can you confirm the sizes?
What's the deal with payment? Pay you or ChristoT?
will confirm sizes tonight,payment to christot.....
-
1315hrs & still in your pit Cristo! :z
Shameful
& poor Red has blisters from typing!, get up lazy boy! :evil
-
hi jamieg.....reflectors and lens good.bulb shield loose.
Looks good to me. I only want the reflectors though, the lens is of no use to me.
Are you available for me to pick them up Friday (this one or next)? I can come to you after I leave work. What time can you be available from?
Sending a PM...
fridays good for me....usually home by 7.30 pm every friday...
-
is the towbar still available?
?
towbar still available,but lots of interest.....submit your best offer and who knows you might be the next owner of a peice of FAZER history ;)
thought it would be :|
:rollin
-
Right, I have an essay to write now.
Noggy, I've spent all day pulling down walls and digging up tree roots with a digger. Ooh arr! Now buy stuff! :lol
CRH: No idea on the chain, to be fair. It was on the bike when I got it, although I suspect pretty new. I reckon 6,000 miles old then. It seemed in good nick, no noticeable tight spots and no kinks, oiled and cleaned regularly etc. It was nowhere near the wear limit. If you twist my arm, I'll part with it for £10.
Lawrence: YES, I do have the derestriction kit lurking in my box 'o bits. I may rob the restrictor kit from the bike and sell it separately, as they're worth quite a few ££s. The restrictor is thicker jets, beefier springs, and plates ON TOP of the diaphram.
Jamie: Tyre sizes are standard Fazer: 110/10 ZR17 front, 160/60 ZR17 rear. Pilot Road 3s. I believe I mentionned £120 for the pair?
-
ok christo chain sold!!...thanks!...ile pm ya in a bit ;)
-
ok christo chain sold!!...thanks!...ile pm ya in a bit ;)
I should have mentionned - that's conditional on you buying the towbar at £200... :evil
-
hey?......dont even think about it? :evil .....think paul wants it realy?...just price putting him off a bit ;)
-
hey?......dont even think about it? :evil .....think paul wants it realy?...just price putting him off a bit ;)
Well it cost me over £300 to have the bloody thing made in the first place (about half of my summer earnings), it was going to be towing 150kgs of trailer across the UK, through half of Europe and home to France - a journey of 1500kms, with a REALLY long run on the last day (700kms, going from south Holland, through Belgium to Brittany). It's built to last, and I need to make something back on it now the Fazer's gone tits up. Especially as the bike was going to pay for transport to and from the US, not to mention contributing to a vehicle/insurance while over there. And what with the excess to pay etc - I'm broke. I have worked a crap job all summer, and thanks to this, I have LOST money. No profit, AND I no longer have a bike to sell.
Pre crash, the bike stood at about £1600 (I was going to respray it, and sort out a few gremlins prior to the sale). So far I've made £25. Woot bloody woot.
If the towbar doesn't sell, I'll keep it back. Fuck knows why, I doubt I'll be back on bikes, let alone a Fazer if my parents and the insurance company have anything to say about it. :'( :'( :'(
-
yea feel for ya matey?...you never get back what it costs to begin with though?....from what i can see you askin?...its not realy over the top!..but cant realy see you getin 200 for towbar :rolleyes ....you know what it cost you but nobody will realy care what you paid and will want it for next to nowt?...be a classic one day though!! 8)
-
You havent given me a price on those manky calipers yet Cristo. :b
Big ££££
Or little ££££££ ????????
& will you sell them individually???
-
You havent given me a price on those manky calipers yet Cristo. :b
Big ££££
Or little ££££££ ????????
& will you sell them individually???
The callipers aren't manky! I'll sell you the pair for £40, with the pads, and that's cheap!
Individually, the second's harder to sell, ergo £25 each.
-
You havent given me a price on those manky calipers yet Cristo. :b
Big ££££
Or little ££££££ ????????
& will you sell them individually???
The callipers aren't manky! I'll sell you the pair for £40, with the pads, and that's cheap!
Individually, the second's harder to sell, ergo £25 each.
Deal!, ill have them both....plus you get the added bonus of me buggering off :lol
Pm me your details & ill paypal you the funds.
Cheers Cristo, always a pleasure! 8)
-
you get the added bonus of me buggering off :lol
Oh, thank foc for that!! :rollin :rollin :rollin
PM sent. :)
-
Couple of questions about the seat:
Is the seat height on a boxeye really higher than the later seats? If so I'm keen on it.
And does the £30 include postage? If not could you get a price for postage to Coventry?
-
Couple of questions about the seat:
Is the seat height on a boxeye really higher than the later seats? If so I'm keen on it.
And does the £30 include postage? If not could you get a price for postage to Coventry?
Seat height is the same as on the Foxeye. For postage, ask Mr RED.
-
evening all......ok ,not done as much as i had hoped tonight,bike is off the trailer and on centre stand with the front propped up with a block of wood.....thats all i have done :o ...iam old,i know iam old,iam also wet through,this has nothing to do with me being old,..........yes its pissing down again,bugger............anyway the tyres look good,no damage and nicely scrubbed in :) ...the chain is indeed well lubbed and mid-way on the adjusters,it is very tight though so i guess the wheel is out of alignment as a result of the accident...think it will be ok.....now the bikes on the stand removing the wheel and chain will be easy and if its not raining i will do tomorrow evening..oh, the chain has a soft link which i shall use to break the chain....if its still raining iam going to give noah a hand with his boat ;)
-
Couple of questions about the seat:
Is the seat height on a boxeye really higher than the later seats? If so I'm keen on it.
And does the £30 include postage? If not could you get a price for postage to Coventry?
Seat height is the same as on the Foxeye. For postage, ask Mr RED.
Ah ok, I'll leave it if they're the same then mate, cheers.
-
Hi,
Is the front brake lever intact, please.
-
Hi,
Is the front brake lever intact, please.
hi mm......i think it is,will double check and let you know tomorrow :)
-
evening all......ok ,not done as much as i had hoped tonight,bike is off the trailer and on centre stand with the front propped up with a block of wood.....thats all i have done :o ...iam old,i know iam old,iam also wet through,this has nothing to do with me being old,..........yes its pissing down again,bugger............anyway the tyres look good,no damage and nicely scrubbed in :) ...the chain is indeed well lubbed and mid-way on the adjusters,it is very tight though so i guess the wheel is out of alignment as a result of the accident...think it will be ok.....now the bikes on the stand removing the wheel and chain will be easy and if its not raining i will do tomorrow evening..oh, the chain has a soft link which i shall use to break the chain....if its still raining iam going to give noah a hand with his boat ;)
Remind me to bring another bottle of plonk over for you as well!
Admins, can we add text under Red98s name - FOC-U saint / good Samaritan? :D
-
evening all......ok ,not done as much as i had hoped tonight,bike is off the trailer and on centre stand with the front propped up with a block of wood.....thats all i have done :o ...iam old,i know iam old,iam also wet through,this has nothing to do with me being old,..........yes its pissing down again,bugger............anyway the tyres look good,no damage and nicely scrubbed in :) ...the chain is indeed well lubbed and mid-way on the adjusters,it is very tight though so i guess the wheel is out of alignment as a result of the accident...think it will be ok.....now the bikes on the stand removing the wheel and chain will be easy and if its not raining i will do tomorrow evening..oh, the chain has a soft link which i shall use to break the chain....if its still raining iam going to give noah a hand with his boat ;)
Remind me to bring another bottle of plonk over for you as well!
Admins, can we add text under Red98s name - FOC-U saint / good Samaritan? :D
....think he.d sooner borrow your wellies mate?...hes got to send a pair back to wales tomorrow!! :rolleyes
-
Me again :rolleyes
On the off chance that you had Black bar risers i'd have them.
It has been mentioned i could just paint mine but if theres good black ones kicking around it'll save me the bother.
Cheers!
-
Me again :rolleyes
On the off chance that you had Black bar risers i'd have them.
It has been mentioned i could just paint mine but if theres good black ones kicking around it'll save me the bother.
Cheers!
Nope, mine were silver. If you want spares though... :deal
-
Me again :rolleyes
On the off chance that you had Black bar risers i'd have them.
It has been mentioned i could just paint mine but if theres good black ones kicking around it'll save me the bother.
Cheers!
Nope, mine were silver. If you want spares though... :deal
Go on, how much???
This is a sympathy purchase for any abuse i gave :lol
-
Me again :rolleyes
On the off chance that you had Black bar risers i'd have them.
It has been mentioned i could just paint mine but if theres good black ones kicking around it'll save me the bother.
Cheers!
Nope, mine were silver. If you want spares though... :deal
Go on, how much???
This is a sympathy purchase for any abuse i gave :lol
Do I get a sympathy price too? :lol :lol
How does £10 sound?
-
Me again :rolleyes
On the off chance that you had Black bar risers i'd have them.
It has been mentioned i could just paint mine but if theres good black ones kicking around it'll save me the bother.
Cheers!
Nope, mine were silver. If you want spares though... :deal
Go on, how much???
This is a sympathy purchase for any abuse i gave :lol
Do I get a sympathy price too? :lol :lol
How does £10 sound?
Well i wasnt feeling too sympathetic, that's the price i had in mind.ta! :)
Im seriously humming & haa ing about those downpipes...i usually buy stuff like that new & £150 will get me some motads,plus i dont want them only lasting a couple years after all the hassle of studs etc, do you know their history or were they just on the bike when you got it???
-
Me again :rolleyes
On the off chance that you had Black bar risers i'd have them.
It has been mentioned i could just paint mine but if theres good black ones kicking around it'll save me the bother.
Cheers!
Nope, mine were silver. If you want spares though... :deal
Go on, how much???
This is a sympathy purchase for any abuse i gave :lol
Do I get a sympathy price too? :lol :lol
How does £10 sound?
Well i wasnt feeling too sympathetic, that's the price i had in mind.ta! :)
Im seriously humming & haa ing about those downpipes...i usually buy stuff like that new & £150 will get me some motads,plus i dont want them only lasting a couple years after all the hassle of studs etc, do you know their history or were they just on the bike when you got it???
Looking at the design, they are from Sandy Bike Spares. They were on the bike when I got it, but I have a receipt saying they were fitted in October 2011, and the bike only did 2,000 miles with them fitted until I bought it (a year later). They were pretty dirty when I got them, but they polish up a treat. No corrosion, hardly any pitting at the front, no rust (they're stainless), and no dammage to the collector. There are a few marks on one of the middle pipes due to the crash), but the damage is slight, and merely cosmetic.
Those pipes have been on the bike for coming up to 2 years and 9,000 miles, but they do polish up very well (see previous pics of bike meets). The original receipt shows they cost £175, I'm basically saving you £100. :D
-
Me again :rolleyes
On the off chance that you had Black bar risers i'd have them.
It has been mentioned i could just paint mine but if theres good black ones kicking around it'll save me the bother.
Cheers!
Nope, mine were silver. If you want spares though... :deal
Go on, how much???
This is a sympathy purchase for any abuse i gave :lol
Do I get a sympathy price too? :lol :lol
How does £10 sound?
Well i wasnt feeling too sympathetic, that's the price i had in mind.ta! :)
Im seriously humming & haa ing about those downpipes...i usually buy stuff like that new & £150 will get me some motads,plus i dont want them only lasting a couple years after all the hassle of studs etc, do you know their history or were they just on the bike when you got it???
Looking at the design, they are from Sandy Bike Spares. They were on the bike when I got it, but I have a receipt saying they were fitted in October 2011, and the bike only did 2,000 miles with them fitted until I bought it (a year later). They were pretty dirty when I got them, but they polish up a treat. No corrosion, hardly any pitting at the front, no rust (they're stainless), and no dammage to the collector. There are a few marks on one of the middle pipes due to the crash), but the damage is slight, and merely cosmetic.
Those pipes have been on the bike for coming up to 2 years and 9,000 miles, but they do polish up very well (see previous pics of bike meets). The original receipt shows they cost £175, I'm basically saving you £100. :D
Well i seem to buying lots of stuff i dont actually need, ill soon have the fazerspares west wales branch. :)
I'll give you £80 for them including economy postage but by all means try getting more for them off someone else first as there could be someone needing them for an mot or whatever in which case they'll prob pay more but i prob wouldnt even get round to fitting them til next year after periodically soaking the studs with penetrating oil.
I am your number 1 customer so far ;)
-
Well, I said £80 for them from the start. If you're willing to pay that they're yours! Plus postage though, please!
On the sales, I'm pricing by how much I would want to pay for each item.
You are indeed my number one client! As a token of my esteem for your custom, here's a £10 voucher off the sale of the towbar. :lol :lol :lol
-
Well, I said £80 for them from the start. If you're willing to pay that they're yours! Plus postage though, please!
On the sales, I'm pricing by how much I would want to pay for each item.
You are indeed my number one client! As a token of my esteem for your custom, here's a £10 voucher off the sale of the towbar. :lol :lol :lol
Ok, tell you what, cancel my risers & gimme the pipes & ill pay postage with the risers covering me for it hopefully.ive gotta balance my cashflow :thumbup
-
Well, I said £80 for them from the start. If you're willing to pay that they're yours! Plus postage though, please!
On the sales, I'm pricing by how much I would want to pay for each item.
You are indeed my number one client! As a token of my esteem for your custom, here's a £10 voucher off the sale of the towbar. :lol :lol :lol
Ok, tell you what, cancel my risers & gimme the pipes & ill pay postage with the risers covering me for it hopefully.ive gotta balance my cashflow :thumbup
OK, sounds good. want me to keep the risers back for next week then? :lol
-
Well, I said £80 for them from the start. If you're willing to pay that they're yours! Plus postage though, please!
On the sales, I'm pricing by how much I would want to pay for each item.
You are indeed my number one client! As a token of my esteem for your custom, here's a £10 voucher off the sale of the towbar. :lol :lol :lol
Ok, tell you what, cancel my risers & gimme the pipes & ill pay postage with the risers covering me for it hopefully.ive gotta balance my cashflow :thumbup
OK, sounds good. want me to keep the risers back for next week then? :lol
No more purchases, ive gotta save up for that towbar :b
Foc ive even still got a complete set of new rad hoses to flog!!! :eek
Ill wait on red telling me the postage price then ill transfer your dosh., no spending it all on cheap cider & porn though :D
-
But what else does he have to live for :eek
-
But what else does he have to live for :eek
CHRISTOS life is now devoted to selling the........................................................... TOWBAR :lol :lol
-
Over 1200 views on this and he's still got most of it to sell! :lol
Perhaps another 10,000 views and maybe even the towbar will go? Maybe need to think of some alternative uses for it tho...
-
Over 1200 views on this and he's still got most of it to sell! :lol
Perhaps another 10,000 views and maybe even the towbar will go? Maybe need to think of some alternative uses for it tho...
Sigh.
And very depressing it is too. I'd rather be riding it than having to sell it like this.
Come on, Foccers, buy the bloody thing so I can be shot of it! :'(
-
In addition to carbs, what state is the rear disk in?
hi lawrence......took the rear disc off tonight and its not too bad,light scoring and a bit glazed but imo useable....CHRISTO do you have a price for this ?
-
I could be interested in the tyres. What sizes (hoping for stock) and price for both? Having read about about the dented rims, I'll be happy to take than as is and remove the tyres myself.
And NO, I don't want tow bar! : D
hi jamieg....both wheels off the bike now,tyres are very good,no punctures,no damage,no chicken strips,naughty,naughty CHRISTO,just nicely scrubbed in.
..
-
Red is the Rectifier / regulator available and working?
If so how much including postage
Daz (stuttering all the way home after new coils, sparks, plugs and air filter)
-
photo of hugger if still available?
what else is left?
hi bm...sorry for the delay....hugger has a couple of repairs,no cracks or splits,will need prep and paint to make perfect but could use as is........price please CHRISTO :)
.
-
ok christo chain sold!!...thanks!...ile pm ya in a bit ;)
hi clive...chain off tonight and in very good condition,checked all links and not a stiffy in sight,you will need a new soft link :)
-
.photo of rad guard....has a small scrape on top edge...and i do mean small ;) .....good to use as is or paint to make perfect....this is not a cheap flimsy one,quality item........price please CHRISTO :)
-
ok paul thanks!!...pm,d you earlier?
-
Red is the Rectifier / regulator available and working?
If so how much including postage
Daz (stuttering all the way home after new coils, sparks, plugs and air filter)
hi daz........sorry to hear about the coils :rolleyes ......started the bike up tonight and no problems,apart from the neighbours complaining about the noise, forgot i took the can off the other day,sounded fantastic :lol :lol :lol :lol .......so yes regulator fine........CHRISTO another price please........PS...will want to keep this with the bike until the engines sold so buyer can hear/see running :)
-
CHRISTO.......we now have a running engine....tell us the history and what price you thinking of.....i can help out with delivery for cost of fuel ;) ....piccies to come...
-
Red is the Rectifier / regulator available and working?
If so how much including postage
Daz (stuttering all the way home after new coils, sparks, plugs and air filter)
hi daz........sorry to hear about the coils :rolleyes ......started the bike up tonight and no problems,apart from the neighbours complaining about the noise, forgot i took the can off the other day,sounded fantastic :lol :lol :lol :lol .......so yes regulator fine........CHRISTO another price please........PS...will want to keep this with the bike until the engines sold so buyer can hear/see running :)
Red man you deserve a beer for a sterling job and understand about the part but if it needs to go with the engine so be it ;)
Daz
-
sorry daz.....didnt word that too well :o ..i want to keep hold of the regulator untill ive sold the engine,then i will sell the regulator separately.....as your keen to solve your problem thats probs too slow for you ;) ...i need one for my spares bike,best price ive seen is on ebay for £20......i`ll make a lousy salesman,far too honest :lol :lol :lol :lol
-
Right, parts time:
Funny, I was going to say £20 for the rectifier before I saw Red's final post! I'll take £15 for a Foccer.
As in OP, due to the condition and rarity of the rad guard, my starting price is 50 notes. Or make me an offer. :)
The hugger is scruffy, has a fiberglass repair on the left hand side, and so would accept £20 for it.
Disc is OK - does £30 sound fair to you?
Starting price on the engine is £500, but offers will be considered. Looking through the history, it's had regular servicing (annual, maybe? There are a few gaps in the paperwork). No engine faults in the paperwork either. Oil and filters changed regularly too; the oil in it is barely 500 miles old (and the old stuff, 6,000 miles old was pretty clean), it just had fresh coolant put in (and the old stuff that came out was clean) a month and a half ago. 29,500 miles on the clock, has new Iridium plugs in. I've never had any oil leaks, coolant leaks or any engine problems whatsoever. Revs freely and happily across the range, and up to the limiter. The only criticisms are the generator cover (now has a hole in it), a few scratches on the starter motor gear cover and the usual Fazer paint peel. Always starts on the button under 5 seconds, and I only need the choke on the coldest of days.
The valve clearence WASN'T checked at 28,000 miles, but other forum members have reported these still being OK at 50,000 miles - and mine shows no indication of there being any trouble there.
Any more info, please ask! :)
-
Rack?
-
Hi,Is there any news regarding the front brake lever.
It may have been forgotten about.
-
Rectifier / Regulator I require is from year 2002 to 2003 part number 5RT-81960-00
At a guess the box eye will be pre 2002 therefore rectifier will not be the same
Sorry Chris and Red
Daz
-
Rack?
Is a Rentec, and £30. I would have preferred to sell it with the towbar, as it the bar was made to measure with it fitted. Ho hum. :(
Hi,Is there any news regarding the front brake lever.
It may have been forgotten about.
Sorry, Mobile. I think it's OK, if it is, I'll part with it for £10. It's a genuine Yamaha, unlike the clutch lever, which is a pattern and which I'll sell for £5 (even if it fits very well).
Rectifier / Regulator I require is from year 2002 to 2003 part number 5RT-81960-00
At a guess the box eye will be pre 2002 therefore rectifier will not be the same
Sorry Chris and Red
Daz
My Fazer was a 2001. If the parts match up (they may well, as very little was changed), you're still on first dibs.
-
Hi,Is there any news regarding the front brake lever.
It may have been forgotten about.
damn....sorry MM forgot to check last night :o ....will look tonight....promise :)
-
Foc i knew i'd be back in the Cristo Red Fazer store inc!
How is the pillion grab rail please???
& Cristo...how much???
Ta :)
-
hi noggy,welcome back,could i interest you in one of our "C&R REWARD CARDS" :lol :lol
CHRISTO removed the grab handle to fit the rack/towbar,not sure if he still has it...give him a couple of hours to wake up and he will tell you :rolleyes ..if not i have one in my spares mountain,the later type which i believe fits both fox/box eye
dont forget to present your reward card at the checkout..........ps....dont think i`ve mentioned this before.......do you want to buy a tow bar ?
-
He he!! :lol , ill sign up for the rewards card but ill be ticking the box that says:-
"i do not wish to be contacted by C&R or any of its affiliated companies with news or promotional offers regarding towbars" :D
Im after a Black or a Blue one please for my project.
Thanks
Fras
-
He he!! :lol , ill sign up for the rewards card but ill be ticking the box that says:-
"i do not wish to be contacted by C&R or any of its affiliated companies with news or promotional offers regarding towbars" :D
Im after a Black or a Blue one please for my project.
:lol :lol :lol made me lol,having a s*it day at work,cheers fella ;) ........mines a black one,will post piccie later :)
Thanks
Fras
-
I have an early type one, that seems to have been repainted a strange dark metallic green? It looks black until closer inspection though.
I am holding that back though. The towbar system needs a grabrail or a Rentec rack for spacing. I'm especially loath to sell it as Doddsie has shown interest in the rack.
Sorry. :(
-
I have an early type one, that seems to have been repainted a strange dark metallic green? It looks black until closer inspection though.
I am holding that back though. The towbar system needs a grabrail or a Rentec rack for spacing. I'm especially loath to sell it as Doddsie has shown interest in the rack.
Sorry. :(
No probs Cristo,
That leaves a sale for your colleague Red.....his sales targets havent been met since you turned up ;)
-
I have an early type one, that seems to have been repainted a strange dark metallic green? It looks black until closer inspection though.
I am holding that back though. The towbar system needs a grabrail or a Rentec rack for spacing. I'm especially loath to sell it as Doddsie has shown interest in the rack.
Sorry. :(
yeh commision not doing well...going to branch out on my own :lol .........oh no, another splinter group :rolleyes ....will sort it out and post piccie tonight.....your reward card is not acceptable on sole sales ..sorry :D
No probs Cristo,
That leaves a sale for your colleague Red.....his sales targets havent been met since you turned up ;)
-
Sorry bud, Just realised Ive managed 32 years without a rack so not much point in getting one now!! Cheers anyway.
-
Hi,Is there any news regarding the front brake lever.
It may have been forgotten about.
hi mm....removed the brake lever tonight,its in one bit,the adjuster adjusts,has a few marks and things but in good working order :) .......left me phone at work so will post picture tomorrow.......MR CHRISTO,a price please[size=78%] [/size]
-
Hi,
what is the condition of the ali ball on the end of the lever, please.
A picture would be good. I am still interested post 198 from ChristoT list the item as £10.
Does this include delivery, to PR1 post code.
Cheers.
-
Hi,
what is the condition of the ali ball on the end of the lever, please.
A picture would be good. I am still interested post 198 from ChristoT list the item as £10.
Does this include delivery, to PR1 post code.
Cheers.
the ball is in one bit with a few scrapes....will post piccie later....cheers prul aka red98
-
A picture would be good. I am still interested post 198 from ChristoT list the item as £10.
Does this include delivery, to PR1 post code.
Cheers.
No, but if you're concerned, I'm sure we can come to a happy medium via PMs. It's not hugely heavy, so postage shouldn't be excessive anyway. :thumbup
-
Hi,
what is the condition of the ali ball on the end of the lever, please.
A picture would be good. I am still interested post 198 from ChristoT list the item as £10.
Does this include delivery, to PR1 post code.
Cheers.
hi mm......sorry iam going to let you down again :o ....long day at work and am absolutely shattered.....early start tomorrow but should be able to pop home at mid day,will post picture then........best regards paul [size=78%] [/size]
-
In your own time....
-
In your own time....
Mobile - Red98 is doing me a huge favour dismantling the bike, and helping with the sales as he is doing. He isn't obliged to!!
Probably got caught up at work or something. The pics will get to you eventually! :)
-
To save me trolling through 9 pages, are the Renntec rack and rear brake caliper still available please?
-
To save me trolling through 9 pages, are the Renntec rack and rear brake caliper still available please?
Renntec rack, yes (although see my post to Doddsie just a few posts back).
Rear caliper was one of the first parts to go, sorry.
-
you have pm
-
...@ noggy the nog......pictures of grab handle and downpipes :) .....downpipes need a good polish,no rust or corrosion and smooth to the touch,will polish up well.....grab handle is good condition but does have a scrape on one side......hope this helps red98 aka paul :lol
-
.hi mobile mouse....sorry it took so long :)
-
had a busy week fazer lovers,so sorry for the slow replies,ive got the rest of the day off and not back at work untill tomorrow afternoon,so if anyones got any questions of wants pictures taken,now would be a good time ;)
NOGGY AND CRH.....iam just off to see if i can get a good deal on postage for your items,i`ll let you know how i get on :)
-
Right, SOLD LIST time.
The following have been sold:
- Front & rear calipers
- Chain
- Tyres (and wheels)
- Speedo tab
- Downpipes (I presume you still want them, Nog?)
Everything else is available (with a few items with dibs on). Oh, sorry, EXUPNUT has bought the forks, but hasn't paid the £500 yet... :lol :lol :lol
-
see ya keeping the towbar then? :rolleyes .....paul will be disappointed ?..think he wanted it for the thou? ;)
-
see ya keeping the towbar then? :rolleyes .....paul will be disappointed ?..think he wanted it for the thou? ;)
Damn thing should be framed in the FOC-U hall of fame.
It'll make a great puzzle for archaeologists, if they dig it up in about a thousand year's time - "hmmm, were they going back to horse drawn implements then?" :lol
-
Hi,
Thanks for the photo, I will purchase the brake lever.
I'm, in no rush it's not that I need a lever right now.
If you find out how much the postage is going to be.
PM me your paypal details and then I will PM you delivery address after payment.
Cheers,
-
see ya keeping the towbar then? :rolleyes .....paul will be disappointed ?..think he wanted it for the thou? ;)
Damn thing should be framed in the FOC-U hall of fame.
It'll make a great puzzle for archaeologists, if they dig it up in about a thousand year's time - "hmmm, were they going back to horse drawn implements then?" :lol
...Mmmm?..where do you think it should be buried then nick?....york?..or leicester? :rolleyes .....
-
Just very, very deep.....
-
Just very, very deep.....
:foc
At least I have the satisfaction of knowing the bugger worked!! It even saved part of the bike - that rear fairing would be completely focced if the bar hadn't been there.
-
Just very, very deep.....
:foc
At least I have the satisfaction of knowing the bugger worked!! It even saved part of the bike - that rear fairing would be completely focced if the bar hadn't been there.
,,,,sorry christo?...but got to ask?..why then didnt you mount it on the front? :lol
-
To save me trolling through 9 pages, are the Renntec rack and rear brake caliper still available please?
.hi tonyw....pictures of rack,i`ll see if i can give you a price for postage later..it weighs 1.5kg :)
-
Confirming i am happy with all products in the clearout sale.
Just waiting on final price inc p&p then ill transfer you remaining dosh Cristo.
Plus i need your paypal address for the grab handle Red.
Ta :)
-
Confirming i am happy with all products in the clearout sale.
Just waiting on final price inc p&p then ill transfer you remaining dosh Cristo.
Plus i need your paypal address for the grab handle Red.
Ta :)
hi noggy...will post tomorrow all being well :o ...will let you know postage then along with my email address....cheers paul
-
Do you have the rear mud guard/number plater holder available?
-
Do you have the rear mud guard/number plater holder available?
hi thunderpantzs.....yes still on the bike and i think ok,will double check tonight after work,CHRISTO a price please :)
-
Interested in the mirrors. What condition are they in and how much would you want for the pair posted?
-
Do you have the rear mud guard/number plater holder available?
Yes, I do - however, it isn't in perfect condition - the seating for the indicators on the left hand side is broken, so whilst the indicator will hold in OK, it does droop a bit and wobbles.
I resolved the problem by bolting a tail tidy through the original number plate holes. Looks a bit odd, as the stock indicators stick out by about an extra inch, and further back by half an inch. I was thinking of fitting smaller indicators, and trimming the plastic to remove the evidence of the original mounting holes. The tail tidy got a bit bent, but it's very mild steel, so should bend back quite easily. After all, it isn't exactly carrying a huge load!
I'll sell the mudguard with the tail tidy for £40.
Interested in the mirrors. What condition are they in and how much would you want for the pair posted?
I seem to remember they survived the crash nigh on unscathed. They were in good nick, with the inevitable light scuffs on the front. I'd only just fitted a replacement left myself! I'll part with the pair for £25 (not including postage).
-
...hi thunderpants......why am i laughing when i type that :lol a few pictures of the rear mudguard,let me know if you want more ;)
-
Interested in the mirrors. What condition are they in and how much would you want for the pair posted?
..hi arfa....top picture shows the worst damage / scrapes....glass,joints and threads all good,for speed iam going to guess at postage of £5...hope this helps
-
Cool, thanks for digging them out. They're pretty scratched aren't they. You know what, I might have a look around and see if I can find any less scratched. Although if I get desperate, I'll be back in touch. :)
-
PM
-
PM
Replied. ;)
-
that tow bar is far too tempting, though i fear just as a novelty thing.
got any pictures (more out of interest then an actual sale)
any chance of an up to date list of what’s left, i need a bunch load of bits but cant remember what they are
-
that tow bar is far too tempting, though i fear just as a novelty thing.
got any pictures (more out of interest then an actual sale)
any chance of an up to date list of what’s left, i need a bunch load of bits but cant remember what they are
No need to fear - DaleH and I have blazed the trail, and it's a useful commodity! :lol
Most of the bike is left, see the sold list above for what isn't!
-
Something I've thought of actually;
I believe you still have the front and rear master cylinders? If so, price please ^^
-
Something I've thought of actually;
I believe you still have the front and rear master cylinders? If so, price please ^^
I do indeed! I'll do £15 front, £15 rear, or £25 for both.
-
Something I've thought of actually;
I believe you still have the front and rear master cylinders? If so, price please ^^
i`ll have a look at these tonight,pretty sure both are ok.....will update later with pics :)
-
Interested in the exhaust ! Pics please . How much for posting or where are you to collect .
Adam
..hi adam.....more pics for you.not the best in the world but i hope they help....a few dents and scrapes but should polish up well.....cheers paul
-
Something I've thought of actually;
I believe you still have the front and rear master cylinders? If so, price please ^^
..hi DEADEYE.....both master cylinders in excellent condition,no paint missing and the front master cylinder cover screws are not ummm......screwed ;)
-
...DONT LOOK CHRISTO :eek ...........bike as it stands at the moment,still lots of useful parts left ;) ;) ;) ;)
-
...DONT LOOK CHRISTO :eek ...........bike as it stands at the moment,still lots of useful parts left ;) ;) ;) ;)
Too late. :'(
On the plus side, the seat is very comfy!
Paul... where's the towbar...?
-
hi christo....i did warn you :rolleyes :rolleyes :rolleyes ......as for the towbar,i felt a bit un-easy having it at home....now at the tower alongside the crown jewels ;) looks at home there :lol
-
Will leave the tail tidy. Thanks for the pics though.
What condition is the Rad in?
-
Will leave the tail tidy. Thanks for the pics though.
What condition is the Rad in?
will have a look tonight ;)
-
Hi Do you have a
generator cover
clutch lever
LHS indicator (front)
Thanks
-
Hi Do you have a
generator cover
clutch lever
LHS indicator (front)
Thanks
Mine have (in order)-
Has a hole in it
Possibly, but may be scuffed - Red, can you confirm please?
No (was aftermarket, and snapped off anyway)
Sorry!
We can sell you a towbar though... ;)
-
Hi Do you have a
generator cover
clutch lever
LHS indicator (front)
Thanks
Mine have (in order)-
Has a hole in it
Possibly, but may be scuffed - Red, can you confirm please?
No (was aftermarket, and snapped off anyway)
Sorry!
We can sell you a towbar though... ;)
clutch lever has lost its balls....sorry
we can sell you a towbar though... ;)
-
Will leave the tail tidy. Thanks for the pics though.
What condition is the Rad in?
will have a look tonight ;)
sorry thunderpants......only just remembered :o ....will look tomorrow evening and take some pics ;)
-
Something I've thought of actually;
I believe you still have the front and rear master cylinders? If so, price please ^^
..hi DEADEYE.....both master cylinders in excellent condition,no paint missing and the front master cylinder cover screws are not ummm......screwed ;)
Looks good, I'll nab those from you ^^
Probably wait until this weekend for the LoFo ride and collect them if I manage to make it - hope thats ok red :)
-
I know the forks are mangled, but are the preload fork caps intact?
-
I know the forks are mangled, but are the preload fork caps intact?
Should be... I'l wait, and let Red98 confirm though.
-
Something I've thought of actually;
I believe you still have the front and rear master cylinders? If so, price please ^^
..hi DEADEYE.....both master cylinders in excellent condition,no paint missing and the front master cylinder cover screws are not ummm......screwed ;)
Looks good, I'll nab those from you ^^
Probably wait until this weekend for the LoFo ride and collect them if I manage to make it - hope thats ok red :)
yep...can do :) ...save on postage ;)
-
I know the forks are mangled, but are the preload fork caps intact?
Should be... I'l wait, and let Red98 confirm though.
not looked at the rad yet....sorry thunderpants :o ......will look at both tonight and take some pics....... ;)
-
oh hi,could you tell me if the towbar is still for sale please?...and if so?..would you be interested in doing a p/x..for explicit stills of morris motting out baaaaaaabs?... :b :b :b :b :b .....
-
oh hi,could you tell me if the towbar is still for sale please?...and if so?..would you be interested in doing a p/x..for explicit stills of morris motting out baaaaaaabs?... :b :b :b :b :b .....
Hard cash. Or virtual cash if using Paypal. ;)
-
Will leave the tail tidy. Thanks for the pics though.
What condition is the Rad in?
..hi thunderpants...rad looks good and undamaged,no leaks etc......one of the end caps looks a bit wonky..see first picture,not a lot and iam sure it will be ok,just being honest :)
-
I know the forks are mangled, but are the preload fork caps intact?
..hi kebab......christo`s had a go at these as well :rolleyes ....one good , one bad. :\
-
oh hi,could you tell me if the towbar is still for sale please?...and if so?..would you be interested in doing a p/x..for explicit stills of morris motting out baaaaaaabs?... :b :b :b :b :b .....
.come on CRH ...you know you want too ;) ..................mmmm some stills you say ;)
-
I know the forks are mangled, but are the preload fork caps intact?
..hi kebab......christo`s had a go at these as well :rolleyes ....one good , one bad. :\
:eek :eek :eek :eek :eek :eek
How in God's name this THAT happen?!?
£5 for the good cap if you want it?
-
Got a price on the rad mate :)
-
Got a price on the rad mate :)
Due to the aerodynamic shaping (obviously faster than stock :eek ), does £20 sound good?
-
HJFazer has first dibs........rear hugger,has a repair to chain guard,repair stands proud so will need blending in and repainting,needs time spending on it rather than money ;) ......useable as is though :)
-
Do you still have the centre stand? If so, could you take a pic?
Cheers in advance!
-
Do you still have the centre stand? If so, could you take a pic?
Cheers in advance!
hi mr noble.....yes still have the stand.want to keep it until the engines sold so i can start it for new owner....are you in a rush ?.
-
Do you still have the centre stand? If so, could you take a pic?
Cheers in advance!
hi mr noble.....yes still have the stand.want to keep it until the engines sold so i can start it for new owner....are you in a rush ?.
Cheers for getting back to me. No rush at all. The H-link on mine has broken, but going to remove and attempt to weld with the help of my cousin. But incase that doesn't work was looking to get a replacement in the works. Just give me a shout whenever you are ready.
Thanks again!
-
How much are you after for the carburettors?
Probably not much more than £60 - but I'd like to keep them nearish the bike until the engine sells to prove the engine is in good working order. Be advised they have a 33bhp restrictor in, and may need a bit of fettling to get them back up to par (balancing at the very least).
Red98 is probably a better man to talk to on that front!
Any idea if it's possible to remove the restrictors without buggering up the seals?
I'll take them but not in any rush, so whenever the engine has gone.
hi lawrence....waiting for the key to arrive and then i can get the old girl running and check the engine and carbs out...want to sell the engine first so buyer can see it running,one think you cant do with a breakers yard,will let you know soon....cheers paul aka red98
Just thought, is the restrictor just plates, or is it jets too?
WAKE UP CHRISTO..........do you still have all the standard parts to return the carbs too full power ?
Was this answered?
I'll take them if they can easily be returned to full power, this week if possible?
-
I'll take them if they can easily be returned to full power, this week if possible?
Yep, I do have the derestriction kit, and I will be handing it over to Red98 on either Friday or Saturday.
-
Sorry if this has been mentioned before - the plastic frame plugs, do you still have them?
-
Sorry if this has been mentioned before - the plastic frame plugs, do you still have them?
I think so, ask Red98. :) They've not been sold yet, to my knowledge!
-
ok, talking of plugs, have you got the little chrome plastic ones that go in the top of the risers??
-
ok, talking of plugs, have you got the little chrome plastic ones that go in the top of the risers??
Again, I'm pretty sure I have all four, but Red98 will have to confirm. :)
-
Sorry if this has been mentioned before - the plastic frame plugs, do you still have them?
hi fuzzy.......yep,both frame plugs present and correct :)
-
ok, talking of plugs, have you got the little chrome plastic ones that go in the top of the risers??
hi doddsie....are these the ones your after ? :)
-
@ CRH.......rear wheel spindle....grubby but good usable condition :)
-
Thats the ones, how much all in?
-
Did the front fairing/cowling mount/bracket/stay (the bracket that bolts to the front of the frame to hold the front fairing, and speedo, in place) survive?
Andy
-
Did the front fairing/cowling mount/bracket/stay (the bracket that bolts to the front of the frame to hold the front fairing, and speedo, in place) survive?
Andy
No.
Sorry!
Thats the ones, how much all in?
How does £3 sound? Call it a fiver with pessimistic postage?
-
£3 inc postage sounds better!!!
-
£3 inc postage sounds better!!!
You're killing me...
£3, plus postage (the cheapest Red98 can find)?
-
£3.50 then!! ;)
-
£3.50 then!! ;)
My sense of postage is atrocious. Either that, or I'm jumping the privatised Royal Mail price hike! Deal. :D
You have PM.
-
Sorted, cheers! :thumbup
-
Christo - how much for the frame plugs?
Cheers
-
Christo - how much for the frame plugs?
Cheers
Same as Doddsie, £3 for them sound good? Call it £3.50 to include postage.
-
That's a deal :) . Will pm you now
-
thats a challenge.........50p postage :rolleyes
-
Well mine will just drop in an envelope, 2nd class stamp... 50p! :D
-
@ doddsie....one of the caps has a crack,you can just about see it in the original picture (bottom left) its still in one bit,do you still want them ?
-
yeeaah, send em!! ;)
-
Sent you payment for the frame plugs already but just remembered something else!
Have you got the cable guide/bracket thing on the top yoke? It's bolted onto the underside of the yoke, from the rider's perspective you can see it on the right next to the ignition. Mine vibrates like nothing else, maybe a replacement will fix it.
Sorry, hope it's not too late. If you have it, let me know how much you want for it. Thanks chaps :)
-
Sent you payment for the frame plugs already but just remembered something else!
Have you got the cable guide/bracket thing on the top yoke? It's bolted onto the underside of the yoke, from the rider's perspective you can see it on the right next to the ignition. Mine vibrates like nothing else, maybe a replacement will fix it.
Sorry, hope it's not too late. If you have it, let me know how much you want for it. Thanks chaps :)
hi fuzzy..........should be ok.....i`ll check later when it stops raining :rolleyes
-
How much are you after for the carburettors?
Probably not much more than £60 - but I'd like to keep them nearish the bike until the engine sells to prove the engine is in good working order. Be advised they have a 33bhp restrictor in, and may need a bit of fettling to get them back up to par (balancing at the very least).
Red98 is probably a better man to talk to on that front!
Any idea if it's possible to remove the restrictors without buggering up the seals?
I'll take them but not in any rush, so whenever the engine has gone.
hi lawrence....waiting for the key to arrive and then i can get the old girl running and check the engine and carbs out...want to sell the engine first so buyer can see it running,one think you cant do with a breakers yard,will let you know soon....cheers paul aka red98
Just thought, is the restrictor just plates, or is it jets too?
WAKE UP CHRISTO..........do you still have all the standard parts to return the carbs too full power ?
Was this answered?
I'll take them if they can easily be returned to full power, this week if possible?
hi lawrence.....i now have all the standard parts to return to full power.....the engine will be going on ebay shortly, once its been sold i`ll pm you and see if you still want them,i`ll swap the parts over beforehand...regards paul
-
Hopefully it'll actually stop raining at some point today :rolleyes Thanks Red
-
Apologies, will pass on the Rad as mine is slightly less 'aerodynamic' :rollin
Going back to the 'mud guard' and tail tidy. Is it a complete tail tidy unit? As in i could do away with the mudguard that comes with and just use the tail tidy to mount the number plat and Indicators?
-
morning foccers.....wash out yesterday :\ so no fazer time.....work today so will see if i can get out there tonight and take some piccies...sorry for the delay,if its dry next weekend i plan to move the bike to the garage to speed things up a bit :)
-
Apologies, will pass on the Rad as mine is slightly less 'aerodynamic' :rollin
Going back to the 'mud guard' and tail tidy. Is it a complete tail tidy unit? As in i could do away with the mudguard that comes with and just use the tail tidy to mount the number plat and Indicators?
Probably.
I just bolted the tailtidy to the original undertray, due to the cracks in the indicator mounts. A bit of work with a hacksaw could make it lower profile.
-
yeeaah, send em!! ;)
just sent em :) 2nd class for 50p......
-
Sent you payment for the frame plugs already but just remembered something else!
Have you got the cable guide/bracket thing on the top yoke? It's bolted onto the underside of the yoke, from the rider's perspective you can see it on the right next to the ignition. Mine vibrates like nothing else, maybe a replacement will fix it.
Sorry, hope it's not too late. If you have it, let me know how much you want for it. Thanks chaps :)
hi fuzzy....is this the one ? ;)
-
Yes, that's the one! Christo, how much for it? Thanks
-
Yes, that's the one! Christo, how much for it? Thanks
ouch :eek that hurt........iam not french,i dont fall off my bike and iam not mad :lol .....CHRISTO has left the breaking of his bike in my hands...RED98 aka paul ;) ...while he suns himself in the caribbean :\ .......
can post this with the rubbers that you got cheap in the days when christo was pricing items :lol ......not sure of postal costs,think you paid christo £3.50 for the rubbers inc post so how about an extra £3 inc post to stop that annoying rattle :D
-
Haha, sorry Paul. I knew it was you but last time Christo was in charge of monies so had me confused.
I actually sent him £4 for the frame plugs as I thought the 50p postage was a bit optimistic. If you could pm me your paypal address I'll send you the £3 asap :)
-
Haha, sorry Paul. I knew it was you but last time Christo was in charge of monies so had me confused.
I actually sent him £4 for the frame plugs as I thought the 50p postage was a bit optimistic. If you could pm me your paypal address I'll send you the £3 asap :)
hi fuzzy...pm sent...do you want the towbar ? i could send it at the same time :lol
-
Haha, no I'll pass on this occasion thanks. Surely you'd want to keep it for your Fazer Paul? Kudos to Christo for doing it but I'm content with my topbox and panniers for now. Will send you payment in a mo.
-
Hi Red, Could you do me a favour please? I know you have sold the centre stand but could you please measure for me the height of the stand from hole centres to feet and width of the feet and spring length if poss? Reason is a local breaker has a box full of stands and I can bob down and have a rummage mmmmmmmmmm.
My bike was missing said item on purchase.
Many thanks Barrie.
-
Hi Red, Could you do me a favour please? I know you have sold the centre stand but could you please measure for me the height of the stand from hole centres to feet and width of the feet and spring length if poss? Reason is a local breaker has a box full of stands and I can bob down and have a rummage mmmmmmmmmm.
My bike was missing said item on purchase.
Many thanks Barrie.
hi barrie......stand is still on the bike untill i sell the engine but will try and measure tonight....cheers paul
-
Hi, No big rush there. Whenever you can.
Cheers Barrie
-
@PUNKSTIG.......bar end weights have been CHRISTO`d......one paint damage,the other has a small "flat"....i`ll let you decide ;)
-
Hi, No big rush there. Whenever you can.
Cheers Barrie
sorry barrie......forgot about the stand measurements :o ..are you still looking ?
-
@CRH.......rear disc bolts all good,good threads and heads ;) ....i have some bright zinc plated cap heads which i thought were the same size,standard are 25mm,cap heads are 20mm :o .....ill see if i have any 25`s.....
-
Riser plugs arrived yesterday, cheers! :thumbup
-
Riser plugs arrived yesterday, cheers! :thumbup
hi doddsie........foc me,that was slow :eek ....posted FUZZY`S frame plugs at same time and he got them last week.....bloody royal mail.........glad you got them ;)
-
Cost me another £1.29 too but alls well, many thanks. :thumbup
-
About the price of a tyskie. Feel for u mate...i really do
-
Hi, No worries about sizes. Got a stand just need to straighten it and re-weld bridging piece.
Thanks anyway.
Barrie
-
@CRH.......rear disc bolts all good,good threads and heads ;) ....i have some bright zinc plated cap heads which i thought were the same size,standard are 25mm,cap heads are 20mm :o .....ill see if i have any 25`s.....
l
@CRH.....had another rummage in my never ending parts store and came up with these....both bright zinc coated and can be cut to length..25mm on the rear disc...one cap head the other button which matches standard bolts ;)
-
yes paul they,l be fine mate!!...the button heads if you got enough ?...pm me with me bill ;)
-
Are there not any special requirements for disc bolts? Tensile strength etc? Excuse my ignorance if not....
-
not quite sure on that one nick?....suppose thers ..no arm"..in asking paul what he thinks? :\
-
@ PILGO.....rad guard,straight with damage to one corner....silver painted so could be re-finished easily or use as is :)
-
PM'd :)
Chris
-
newbie stupid question of the day------- :o
my headlights are the square/box shape,so will that radiator cover fit the rad on my fazer? (2001/x reg)
-
Yep!
-
:agree ....yeh.both bikes have same rad ;) ....you have first dibs on this PILGO :)
-
Actually, I don't think it's painted. I think it's just metal, which means it would polish up a treat. ;)
-
Hi is the rad cover still going?
-
Hi is the rad cover still going?
hi gav......this is popular.....your 3rd inline,wish i had some more :lol
-
Hi is the rad cover still going?
hi gav......this is popular.....your 3rd inline,wish i had some more :lol
Ok mate no worries you can take me off the list lol. Just taken mine to get re chromed.
-
I could be interested in the swingarm (if it's still available). It must be in decent nick though, incl the bearings (the lower linkage bearings on mine are shot :\ )
-
I could be interested in the swingarm (if it's still available). It must be in decent nick though, incl the bearings (the lower linkage bearings on mine are shot :\ )
hi fuzzy......swing arm is off the bike but i`ve not checked it over...will take a close look tomorrow evening and let you know.....cheers paul
-
@ FUZZY.......all bearings good,swingarm has a few marks,including where the chains come off at one point :rolleyes also a rub mark where the hugger was..let me know if you want any more piccies ....cheers paul
-
Is the centre stand in ok nick? Mine is rotten on the bracing bit between the legs... oooer. haha
Chris
-
Is the centre stand in ok nick? Mine is rotten on the bracing bit between the legs... oooer. haha
Chris
that sounds nasty chris,you want to get that looked at :lol ....not looked at it yet,bike has no wheels or suspension at moment,just propped up on centre stand and block of wood under lower fork yoke....engines on ebay at moment and will strip the rest of the bike when thats sold....will let you know then....cheers paul
-
Cheers Paul, doc says i'm going to pull through... haha.
just let me know whenever.
Chris
-
I'm looking for the rear mudguard which holds the indicators or a tail tidy, as mine has cracks at rear indicator mounts and is paper thin, so need a replacement.
-
Hi Paul, thanks for the photos, sorry took a while to get back to you. Yeah, that looks like it might fit the bill - how much are you looking for?
I'm in SW London, seem to recall you're not all that far from me or am I mistaken?
-
Hi Paul, thanks for the photos, sorry took a while to get back to you. Yeah, that looks like it might fit the bill - how much are you looking for?
I'm in SW London, seem to recall you're not all that far from me or am I mistaken?
hi fuzzy......how does £20 sound....yep not far from you,in high wycombe jct 3 m40
-
I'm looking for the rear mudguard which holds the indicators or a tail tidy, as mine has cracks at rear indicator mounts and is paper thin, so need a replacement.
hi nickodemon....i notice you have a thou ;) is it a 600 rear mudguard you want ? :)
-
I'm looking for the rear mudguard which holds the indicators or a tail tidy, as mine has cracks at rear indicator mounts and is paper thin, so need a replacement.
hi nickodemon....i notice you have a thou ;) is it a 600 rear mudguard you want ? :)
I've got a 600 too 'winter wheels'
-
Hi Paul, thanks for the photos, sorry took a while to get back to you. Yeah, that looks like it might fit the bill - how much are you looking for?
I'm in SW London, seem to recall you're not all that far from me or am I mistaken?
hi fuzzy......how does £20 sound....yep not far from you,in high wycombe jct 3 m40
Ok, will send a pm
-
I'm looking for the rear mudguard which holds the indicators or a tail tidy, as mine has cracks at rear indicator mounts and is paper thin, so need a replacement.
hi nickodemon....i notice you have a thou ;) is it a 600 rear mudguard you want ? :)
I've got a 600 too 'winter wheels'
ah...i see,nice collection you have there :) [size=78%].....the rear guard is damaged around the indicator mount but it does come with a tail tidy and bracket for indicators...think it might be possible to trim the damage and use the tail tide to mount the lights...might improve the looks at the same time [/size] :D ....its off the bike,i`ll dig it out later and have a closer look and take some piccies....cheers paul
-
does the rentec have the fitting kit?
-
does the rentec have the fitting kit?
rack fits in place of the grab handle and i think uses the same bolts/fittings,rack has had the grab handle removed to accommodate a top box,paint is peeling and is rusty in places.....needs stripping and re-painting....will do the job though ...cheers paul
-
does the rentec have the fitting kit?
rack fits in place of the grab handle and i think uses the same bolts/fittings,rack has had the grab handle removed to accommodate a top box,paint is peeling and is rusty in places.....needs stripping and re-painting....will do the job though ...cheers paul
Yep, that's right. However, if you have a newer, plastic grabrail, you will need to use spacers. Mine were just 4 mid / large nuts that gave the adequate clearance off the rear fairing.
-
I'm looking for the rear mudguard which holds the indicators or a tail tidy, as mine has cracks at rear indicator mounts and is paper thin, so need a replacement.
@ nickodemon....rear mudguard and tail tidy,mud guard is split on one of the indicator mounts,using the tail tidy to mount the indicators will solve this and you could trim the old mounts off to tidy things up a bit.....hope the pictures tell the story....cheers paul
-
Some geezer is after a rear caliper urgently,
Not sure of his trustworthyness mind but worth a go if the caliper is still for sale. :)
[font=.HelveticaNeueUI]http://foc-u.co.uk/index.php/topic,10814.msg114541/topicseen.html#new[/font]
-
Some geezer is after a rear caliper urgently,
Not sure of his trustworthyness mind but worth a go if the caliper is still for sale. :)
[font=.HelveticaNeueUI][url]http://foc-u.co.uk/index.php/topic,10814.msg114541/topicseen.html#new[/url][/font]
That went a while ago, along with the front brakes. A pity, as I'd be tempted to fit the front calipers to the ZX. The brakes are shockingly bad on that!
-
... should imagine I have missed this boat, but am in need of a rear brake caliper unit if still available and in good condition - thanks.
-
Some geezer is after a rear caliper urgently,
Not sure of his trustworthyness mind but worth a go if the caliper is still for sale. :)
[font=.HelveticaNeueUI][url]http://foc-u.co.uk/index.php/topic,10814.msg114541/topicseen.html#new[/url] ([url]http://foc-u.co.uk/index.php/topic,10814.msg114541/topicseen.html#new[/url])[/font]
That went a while ago, along with the front brakes. A pity, as I'd be tempted to fit the front calipers to the ZX. The brakes are shockingly bad on that!
I could offer a buy back scheme for those front calipers Cristo!, still in the bubble wrap :D
-
Some geezer is after a rear caliper urgently,
Not sure of his trustworthyness mind but worth a go if the caliper is still for sale. :)
[font=.HelveticaNeueUI][url]http://foc-u.co.uk/index.php/topic,10814.msg114541/topicseen.html#new[/url] ([url]http://foc-u.co.uk/index.php/topic,10814.msg114541/topicseen.html#new[/url])[/font]
That went a while ago, along with the front brakes. A pity, as I'd be tempted to fit the front calipers to the ZX. The brakes are shockingly bad on that!
I could offer a buy back scheme for those front calipers Cristo!, still in the bubble wrap :D
Lol! Apparently, an '01 Fireblade's front calipers are a quasi direct fit. When funds allow: eBay!
-
ive just sold the engine,will strip the bike now and list all parts i have left.....give me a shout if you want anything :D
-
bike is stripped now and in boxes......little bit of twist on the frame which we sort of expected :\ ....i`ll make a list of parts left when i get time, but if anyone`s after anything that may be left just drop me a pm
-
@ midden........sorted the switch gear out today...all good no damage.....let me know if they are any good for you.........cheers paul
-
@ fizzypies.....rear caliper bracket. no damage and ready to use....could do with a coat of paint to make perfect
-
Hey still interested in the centre stand if it's available.
Chris