old - Fazer Owners Club - old
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: bbb on 08 September 2013, 11:42:08 am
-
Did the headlight mod yesterday, very good write-up, bought the connectors from Autostar on ebay (cheap and next day delivery) included a waterproof connector that now sits behind the clocks in case of any MoT issues. Just need to adjust the beams (inner for vertical??) now.
(http://i124.photobucket.com/albums/p4/bay_meister/connectors.jpg) (http://s124.photobucket.com/user/bay_meister/media/connectors.jpg.html)
Also ordered a 2.8mm female connector from autostar to replace the blue heatshrink part that should in theory enable me to use the blue connector under the tank.
(http://i124.photobucket.com/albums/p4/bay_meister/Wiring.jpg) (http://s124.photobucket.com/user/bay_meister/media/Wiring.jpg.html)
Considering removing the metal cover over the dipped beam, has anyone had any issues at MoT time with the cover removed?
Cheers
-
Adjust at night or in a dark garage, it's much easier.
If you mean that metal shroud thingy, they just end up vibrating and either fall off or get removed.
-
The metal shroud I removed on mine and it went through its MOT fine :)