old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: Dead Eye on 18 July 2013, 07:49:37 am

Title: Rear Caliper Mounting Bolts
Post by: Dead Eye on 18 July 2013, 07:49:37 am

Anyone have idea what size they are? I don't have the time to order them from the internet, so its to B&Q again to dig around in their Nuts & Bolts aisle and be confused for about a half hour  :rolleyes

I think the closest match is probably M10x50mm ? Can anyone confirm?

Title: Re: Rear Caliper Mounting Bolts
Post by: His Dudeness on 18 July 2013, 08:37:23 am

Have a look in the repair manual. It lists the bolt sizes at the start of the manual

Title: Re: Rear Caliper Mounting Bolts
Post by: Dead Eye on 18 July 2013, 09:20:03 am

Are you referring to the Haynes? As that doesn't list bolt sizes, only the torque settings

In any case, I popped down to my local B&Q after taking some measurements in the garage - correct size is M10x40mm but I managed to buy the wrong thread pitch :( Going to have to back down AGAIN and correct my mistake

Title: Re: Rear Caliper Mounting Bolts
Post by: His Dudeness on 18 July 2013, 09:42:10 am

The yamaha manual should have it

Title: Re: Rear Caliper Mounting Bolts
Post by: Dead Eye on 18 July 2013, 10:20:24 am

Ah, I've never seen that before, didn't even know it existed :P

For anyone who stumbles on to this thread; download link is here http://foc-u.co.uk/index.php?action=downloads;sa=view;down=8 (http://foc-u.co.uk/index.php?action=downloads;sa=view;down=8)

Its M10 x 1.25 x 40mm

Edit: As it turns out, that size is a pain in the ass to get hold of locally :( eBay next day delivery job hoping that it arrives in time for me to reattach the caliper

I don't suppose anyone would mind missing two bolts from their bike for an hour? haha  :lol If only Christo still lived nearby... I'd pop round and rob them  :evil