old - Fazer Owners Club - old

General => General => Topic started by: reddave101 on 06 July 2013, 05:47:38 pm

Title: What mods are left to be done
Post by: reddave101 on 06 July 2013, 05:47:38 pm
Hi all I have a fazer 98 which is my pride and joy and love spending money on it but now running out of ideas what to do next what's done so far..,.

Stage 2 dyno jet
K&n air and oil filter
Bos titanium end can
4 into 1 stainless down pipes
Full size belly pan
Heavy duty clutch plates and springs
Projection components 4 way jack up bones
Iridium plugs
Smoked double bubble screen
Smoked headlight protectors
Fork and swing arm crash bungs
Titanium swing arm plugs
Alloy screen bolts
Gel heated custom seat
Chrome luggage rack with sissy bar
Acumen digital gear indicator with volt meter
Full set stainless engine bolts
Up rated front and rear sprockets 49rear 16 front
Jt heavy duty x-ring gold chain
Wheel stripes
Led daytime running lights
Chrome radiator cover with fazer logo
Fender extenda
Carbon rear hugger
Hyper pro up rated front springs..
Titanium yoke nut
Full set braided good ridge brake hoses racing at front


So now running out of ideas what to do next. Any suggestions??
Title: Re: What mods are left to be done
Post by: Hedgetrimmer on 06 July 2013, 05:50:00 pm
Paint job?
Title: Re: What mods are left to be done
Post by: stevierst on 06 July 2013, 06:28:02 pm
Shorty levers, r6 shock, fork rebuild, heated grips, led lights/indicators?

 You need to put some pics of your mods on here to influence others. But keep going!
Title: Re: What mods are left to be done
Post by: Exupnut on 06 July 2013, 06:35:17 pm
STOP JUST STOP!!! u know u can ;-) an if u did u could spend it on go go juice
Title: Re: What mods are left to be done
Post by: Hedgetrimmer on 06 July 2013, 07:14:46 pm
Or loads of drugs, booze 'n' whores...oh sorry, did I say that aloud?  :lol
Title: Re: What mods are left to be done
Post by: reddave101 on 06 July 2013, 07:22:18 pm
Forgot to mention fabricated alloy bar ends. Thought bout paint job but the original one is immaculate. It's polished, conditioner and waxed quite often. Did try led indicators but didn't think they looked right so scrapped that idea. I'm actually considering buying another just to start again lol.. Don't think need go go juice as it goes like a freight train now. Got hein gericke heated grips but didn't like the messy wires coming from the grips. So just attatch the wrap around hot grips during winter. Will upload pics when get back from work. For the love of the bike I just don't want to stop...


Oh and got short levers but got big hands so didn't get along with them..But a very good suggestion r6 shock. I'm going shopping. eBay here I come..
Title: Re: What mods are left to be done
Post by: Hedgetrimmer on 06 July 2013, 07:25:50 pm
Ever seen a turbo'd FZS600? Just an idea... ;)
Title: Re: What mods are left to be done
Post by: snapper on 06 July 2013, 07:44:16 pm
extra loud horn maybe ?
 
wheres the pic's tho ?
 
what about a single side swing arm ?
Title: Re: What mods are left to be done
Post by: chaz on 06 July 2013, 07:44:28 pm
spent loads on mine c. £4000 on fuel over £1000 on tyres, one chain and sprocket set and a little screen = FUN
Title: Re: What mods are left to be done
Post by: stevierst on 06 July 2013, 07:58:48 pm
Renthal 758's ? Best mod I did to mine if you ask me.
Title: Re: What mods are left to be done
Post by: Motorbreath on 06 July 2013, 10:50:31 pm
For example:

- Fine rear shock (FG Gubellini for example)
- Fork preload adjusters
- Thunderace/XJR rear brake torque arm
- 3.5" wide front rim from a TRX850 for fitting 120/70 tyres.
- 170/60 rear tyre

As I have just bought an ThunderWhale I am going to sell those and other bits within a couple of weeks, if you want to wait for them. (Except for the tyre and maybe the rim).
Title: Re: What mods are left to be done
Post by: dBfazer600 on 07 July 2013, 12:10:12 am
Skin graph your ass onto the seat and enjoy  :lol
 
Daz
Title: Re: What mods are left to be done
Post by: reddave101 on 07 July 2013, 10:37:47 am
pics
Title: Re: What mods are left to be done
Post by: reddave101 on 07 July 2013, 10:41:56 am
pics
Title: Re: What mods are left to be done
Post by: DryRob on 07 July 2013, 11:07:31 am
Quote from: nick crisp on 06 July 2013, 07:25:50 pm
Ever seen a turbo'd FZS600? Just an idea... ;)

I might be wrong but I think someone did that a while back and put a hole in the engine casing

Looks good though
Title: Re: What mods are left to be done
Post by: stevierst on 07 July 2013, 11:44:57 am
A pair of fat bars would look good on her.
Title: Re: What mods are left to be done
Post by: Hedgetrimmer on 07 July 2013, 10:04:47 pm
I really thought this was gonna look way over the top, but that looks sweet  :)
Title: Re: What mods are left to be done
Post by: alan sherman on 08 July 2013, 02:26:23 pm
Swap the numberplate and rear reflector around to tidy up teh rear end.  If your plate is oversize then get one that is actually the minimum legal size.

Lower renthal bars.

Ditch the smoke light covers - the lights are crap without making them worse

Galfer Wavey discs (look great but the jury is out on performance)

Titanium disc bolts

XJR torque arm

Blue spot rear caliper from a fazer thousand.

Rearsets, some lighter pegs.

Sort that radiator cover out.  Cut the sides away so you can re-fit the original aluminium side trims.  It will look much better.
Title: Re: What mods are left to be done
Post by: Enceladus on 08 July 2013, 02:33:37 pm
what's the gizmo for just above the speedo ?
Title: Re: What mods are left to be done
Post by: reddave101 on 08 July 2013, 02:39:27 pm
Quote from: Enceladus on 08 July 2013, 02:33:37 pm
what's the gizmo for just above the speedo ?

it's a acumen gear indicator and volt meter for the battery.....
Title: Re: What mods are left to be done
Post by: Ebme Geek on 08 July 2013, 04:01:18 pm
How about the later mirrors so you can see more than your elbows !  A mod I want to do in the near future.
Oh, maybe a tempature guage.
 
Nice bike
Title: Re: What mods are left to be done
Post by: caretaker on 08 July 2013, 05:06:46 pm
what you need matey is a trx850 caliper complete with carrier and torque arm! fit straight in, all you need is a new brake hose. in fact i have mine on ebay right now so get bidding!
Title: Re: What mods are left to be done
Post by: reddave101 on 08 July 2013, 06:17:21 pm
Not a bad idea with the later mirrors. Kinda got round with these ones as fitted blind spot mirrors which work a treat but will look into that cheers..
Title: Re: What mods are left to be done
Post by: alan sherman on 10 July 2013, 10:41:07 am
Pictures


(https://lh3.googleusercontent.com/-amV0DfBWhFQ/Ud0mzHapVQI/AAAAAAAAAR8/Ilzl0VPWKbM/s800/20130710_081813.jpg)




(https://lh6.googleusercontent.com/-8OreaHYGwiE/Ud0mTM8okFI/AAAAAAAAARs/V3wmwZLP0ZM/s800/20130710_081828.jpg)






(https://lh5.googleusercontent.com/-mk6UC-64F3o/Ud0m9wgIT3I/AAAAAAAAASE/9SZwxC-Z-oU/s800/20130710_081841.jpg)






(https://lh5.googleusercontent.com/-eUKRJofbrIw/Ud0mjL8rcQI/AAAAAAAAAR0/Y6j-hKNrk-g/s800/20130710_081858.jpg)






63,000 miles and in for a service.
Title: Re: What mods are left to be done
Post by: Enceladus on 10 July 2013, 10:51:54 am
that high level end can looks nice !