old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: fazer-rat on 04 June 2013, 06:19:51 pm

Title: getting there
Post by: fazer-rat on 04 June 2013, 06:19:51 pm

just installed the 4 degree advancer,,,, now thats a fazer!!! :b  taxed it today so may try a spin out tomorrow.  engine is soooo crisp and urgent now,,, if anyone doesn't have one fitted do it,, the best 10 quid you'll ever spend :lol

Title: Re: getting there
Post by: tomlinscote on 04 June 2013, 08:34:21 pm

is this a standalone mod or do you need an ivanised bike ?
 
Tommo

Title: Re: getting there
Post by: red98 on 04 June 2013, 09:22:47 pm

oh   oh   oh.....tell me more  :)

Title: Re: getting there
Post by: fazer-rat on 05 June 2013, 02:05:59 am

sorry got the price wrong,, they're 14.00 delivered.  it doesn't need a jet kit and makes yer fazz much more lively and makes them start better too.  yamaha set them up retarded for crappy petrol quality in some countries, our fuel is consistently good so they run and start better as a result.
http://www.ebay.co.uk/itm/151041373302?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 (http://www.ebay.co.uk/itm/151041373302?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649)

Title: Re: getting there
Post by: Exupnut on 05 June 2013, 08:00:46 am

Covered here

http://foc-u.co.uk/index.php?topic=2243.0

Title: Re: getting there
Post by: Exupnut on 05 June 2013, 08:05:16 am

Quote from: Exupnut on 05 June 2013, 08:00:46 am

Covered here

[url]http://foc-u.co.uk/index.php?topic=2243.0[/url]

And here on the fz10A board

http://www.yamahafz1oa.com/forum/showthread.php?t=122724&page=3

Title: Re: getting there
Post by: FuZzBoM on 10 June 2013, 11:54:04 pm

Off the back of this thread I ordered an advancer. arrived today and fitted.
Instantly starting was much better using no choke at all, idle sounds a little less lumpy. Pick-up from the bottom also noticeably better (less fluffy).
Not noticed any great benefit in better pull at low revs, but then I only took a quick blast to the petrol station and back.  :lol
Engine does feel a little less peaky and more smooth up the rev range.

One main thing I did notice was less popping from the exhaust on downshift!? Maybe in my head, time will tell.

my only complaint was the machining of that one from ebay was rather tight. I tried to get it on but the locating lug just would not go. I had to get a small file out and take off the edge where there was a small lip. Once lip removed was a very snug fit. torqued up to 60NM and so far so good.

Will update after a longer ride.

thanks, Fuzz

Title: Re: getting there
Post by: fazer-rat on 11 June 2013, 05:12:02 am

hi m8,, i found the same regarding tight fitting but if it wasn't it would move i guess.  i did the same as you :lol
everything else you said is the reason its the best 14 quid you can spend on your fazer 8)

Title: Re: getting there
Post by: kebab19 on 11 June 2013, 05:50:15 pm

Selling my standard one that you could easily mod, along with gasket


Item number:
251287527569