old - Fazer Owners Club - old
General => General => Topic started by: simonm on 22 April 2013, 09:38:58 am
-
I used the ol soldering iron trick to rejoin or melt some of my plastic fairing back together.
anyone have advice on how to hide or restore a consistent finish across the entire visible panel ?
Thanks
-
I just did something similar. The finish I achieved wasn't brilliant (mainly due to my lack of expertise I would imagine rather than the method)
Make sure the welds are below the normal surface of the surrounding plastic, then sand, bodyfiller, etc. The repair I did to the fairing came out a lot better than the small dents in the tank I tried to fix. :'(
-
Thanks ChristoT,
I was thinking more about the plain matt plastic finish rather than actual bodywork.
I'm uncertain what to do about the exterior damage as I have the DRYC1 (deep reddish yellow cocktail 1) which seems to be darned expensive and needs a basecoat for a proper finish (and I'm an appalling sprayer).
:D
-
http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_171468_langId_-1_categoryId_165625 (http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_171468_langId_-1_categoryId_165625)
http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_203999_langId_-1_categoryId_165495 (http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_203999_langId_-1_categoryId_165495)
http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_173960_langId_-1_categoryId_165495 (http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_173960_langId_-1_categoryId_165495)