old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: Lazarus on 03 April 2013, 09:27:56 pm

Title: Removing Front Nose Cone
Post by: Lazarus on 03 April 2013, 09:27:56 pm

anyone direct me to an article that covers the instructions on removing the front nose cone on a FZS600 2003 (Foxeye) model.


have the inners and the mirrors off


need to know how to disconnect everything else so I dont break it worse than it already is.

Title: Re: Removing Front Nose Cone
Post by: Lazarus on 04 April 2013, 05:09:45 pm

forget this - worked it out!

Title: Re: Removing Front Nose Cone
Post by: clayt74 on 04 April 2013, 05:20:15 pm

Well done. Im going to have to try the same soon so any tips you have would be gratefully received.  A quick question you may beable to answer.... it is still ppossible to leave the headlamps and bolt on the indicators so that it is possible to ride the bike whilst I repair the nose cone?
Cheers

Title: Re: Removing Front Nose Cone
Post by: Lazarus on 04 April 2013, 10:26:12 pm

fairly straightforward once its done. only one screw was a bitch - i ended up having to take off the speed unit to get to it. if you have a REALLY short stubby screwdrive you might be able to get to it. Had to remove the MRA screen for access.

it probably is rideable without the nose cone - wouldnt recommend though unless you tape up all of the wires for the speedo.