old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: kylron on 09 February 2013, 11:51:56 pm

Title: chinese levers
Post by: kylron on 09 February 2013, 11:51:56 pm

Has anyone tried any of the cheap CNC levers from eBay.2wheels seems to come up often as a supplier.I can't afford the top end ones like pazzo and just wondered if there was a cheaper alternative that worked well.

Title: Re: chinese levers
Post by: Exupnut on 10 February 2013, 12:24:42 am

i got these on mine...not this exact link but something very similar....mine were £20 each




http://www.ebay.co.uk/itm/Adjustable-Folding-Extendable-Levers-YAMAHA-FZ1-FAZER-2001-2005-FZS1000-01-05-/261085340494?pt=Motorcycles_Parts_Accessories&hash=item3cc9e6234e (http://www.ebay.co.uk/itm/Adjustable-Folding-Extendable-Levers-YAMAHA-FZ1-FAZER-2001-2005-FZS1000-01-05-/261085340494?pt=Motorcycles_Parts_Accessories&hash=item3cc9e6234e)

Title: Re: chinese levers
Post by: stevierst on 10 February 2013, 05:39:04 am

Got a set of Chinese cheapies myself. The ones I got are a better fit than the factory levers. I think they were £19 for the pair. Feel a hell of a lot better too.

Title: Re: chinese levers
Post by: ghostbiker on 10 February 2013, 06:15:22 am

Had my copies for about 2 years now and no problems other than to colour fades a bit. Fit is good and work well. Payed about 30 quid delivered but they can be found cheaper.

I have heard the adjustable ones from stuby to long needs the grub screw changed as its poor quality.

Title: Re: chinese levers
Post by: steeeve66 on 10 February 2013, 10:06:08 am

Got mine from 'Bikez' (I think) for around 30 quid and they've been excellent. Also had them on my SD for a few years also with no problems. Service was pretty good too. S

Title: Re: chinese levers
Post by: kylron on 10 February 2013, 11:42:20 am

Thanks for the info,might give them a try now I'm looking for a set of black ones.

Title: Re: chinese levers
Post by: ZiggyCol on 11 February 2013, 12:10:27 pm

I bought a pair from 'etshark1970', total about £34.
 
Perfect fit, not even any colour fade on the black/red.
 
Not sure if seller still ebaying . . .

Title: Re: chinese levers
Post by: Mark YPVS on 11 February 2013, 06:32:42 pm

Hi I got these for my RD350YPVS as i fitted a FZ1 Brake cylinder to it, good quality, the bolts could have been cut better( a bit rough ) but for £33 i would recomend them
http://www.ebay.co.uk/itm/YAMAHA-FZ1-FZ1N-FAZER-06-10-07-08-09-11-2011-2010-Adjustable-Brake-Clutch-Levers-/290618905416?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D5523770136697167957%26pid%3D100015%26prg%3D1006%26rk%3D1%26sd%3D290618905416%26 (http://www.ebay.co.uk/itm/YAMAHA-FZ1-FZ1N-FAZER-06-10-07-08-09-11-2011-2010-Adjustable-Brake-Clutch-Levers-/290618905416?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D5523770136697167957%26pid%3D100015%26prg%3D1006%26rk%3D1%26sd%3D290618905416%26)
 
 
 

Title: Re: chinese levers
Post by: bigfootpete on 12 February 2013, 07:58:38 pm

I used to have a CRG brake lever, but couldn't use it with my Brembo master cylinder, it looked the business, but I just had a look now and they want £75!

Title: Re: chinese levers
Post by: kylron on 12 February 2013, 09:26:04 pm

I had a look at the expensive ones but can't justify spending 150+ on a couple of levers.

Title: Re: chinese levers
Post by: kylron on 13 February 2013, 04:23:30 pm

Found a pair of standard type levers from demon tweaks in matt black for 23.99
They also do anodized ones as well so have ordered a set to see what their like.