old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: jools on 29 December 2012, 04:35:13 pm

Title: started the big clean
Post by: jools on 29 December 2012, 04:35:13 pm

started cleaning and refurbishing the fazer 1000 see what ya think
and yes i got bored today.
before
(http://i1066.photobucket.com/albums/u416/joolspritch/20120929_23.jpg)
and after
(http://i1066.photobucket.com/albums/u416/joolspritch/20121229_114902.jpg)
the refurbished alloy parts where polished and 2 thin coats of clear.
jools

Title: Re: started the big clean
Post by: Mick-H on 29 December 2012, 04:58:52 pm

Looking good.

Title: Re: started the big clean
Post by: Topcat2006 on 29 December 2012, 05:35:05 pm

What did you use to polish them with?

Title: Re: started the big clean
Post by: dolau on 29 December 2012, 05:35:44 pm

What did you use?

Just brought some MucOff as that seems to work

Title: Re: started the big clean
Post by: budgiemurray on 29 December 2012, 07:38:50 pm

nicely done.. you do that by hand or machine? I take it you removed to polish or was it done on bike with a bit of masking up for spraying?
 
Budgie
 

Title: Re: started the big clean
Post by: tiggr2 on 29 December 2012, 10:03:38 pm

So thats what they are supposed to look like  :eek

Title: Re: started the big clean
Post by: Rebuilt on 30 December 2012, 12:21:42 pm

Mucoff does work well .... then muc off miracle shine makes it nice n sparkly  8)

Title: Re: started the big clean
Post by: jools on 30 December 2012, 02:58:02 pm

Hi all first i would like to apologise for the large photos they would not go any smaller.
 
I did take them all off and polished the heal plates with a polishing mop on a drill.
and the had a scotch brite cylinder attachment on the drill
 to take off all of the old lacquer on the side plates
to make them look nice and shinny, i then cleaned everything ready for
the new lacquer.
jools