old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: Stuajohnson79 on 22 August 2012, 08:23:08 pm

Title: None standard exhaust
Post by: Stuajohnson79 on 22 August 2012, 08:23:08 pm

Chatting to a few guys at work who have noticed that there is a Nexxus exhaust system on board, they've been asking if the air filter has been up graded, fuel map set and other things. Obviously I have no idea what's been done. Do certain things need to be carried out if the system has been replaced? It's a full system from the down pipes back!

Title: Re: None standard exhaust
Post by: richfzs on 22 August 2012, 08:28:02 pm

Ask them exactly how they'd install a custom map, on a carbed bike...   :rollin :rollin

The FZS600 runs a bit rich as standard, and needs no re-jetting with an after market can - I don't know for sure, but am 99.9% certain that will remain the case with a full exahust system replacement too.

Title: Re: None standard exhaust
Post by: markbubble on 22 August 2012, 08:32:04 pm

is yours is the carb model fazer ?if so how can it be mappeed?!!!mine is (a 98 600) and it has aftermarket end can with no need for any other work to work fine,im pretty sure  the nexxus system is ment as a direct swap with no need to alter anything at all,the best and easy  thing to check if every thing is working ok is to take plugs out and have a look and see on the colour to see if its running too rich or lean etc

Title: Re: None standard exhaust
Post by: Stuajohnson79 on 22 August 2012, 08:34:37 pm

Haha, I hadn't even thought about the mapping issue!

Title: Re: None standard exhaust
Post by: red98 on 22 August 2012, 09:29:15 pm

your bike will be fine in standard form.no need to re-jet same goes with air filter......see above about re-map  :rollin :rollin :rollin :rollin

Title: Re: None standard exhaust
Post by: renegaderacer on 22 August 2012, 11:44:33 pm

I've recently fitted a full system with Simmi end can (baffles still in), K&N filter element and new plugs and she runs sweet as a nut. Pulls really strongly with no flat spots and no re-jetting!  ;)

Giles

Title: Re: None standard exhaust
Post by: Dead Eye on 23 August 2012, 11:40:47 am

I have aftermarket downpipes and end can plus K&N Air Filter and new plugs (well 2,000 miles ago I did) and have had no trouble at all

Title: None standard exhaust
Post by: blue_faz600 on 24 August 2012, 11:37:25 pm

I have just replaced my exhaust system with a full system from Delkevic and I didnt change the air filter, adjust the carbs or anything. It pulls harder and sounds great! So the answer is no! You don't HAVE to do any of those things your mates suggested when changing exhaust systems! :) especially mapping ;p