old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: markbubble on 16 July 2012, 08:24:18 pm

Title: fzs600 torque arm upgrade?
Post by: markbubble on 16 July 2012, 08:24:18 pm

hi guys is there any after market torque arms available for a 98 fazer 600  ie alloy or stainless type?
mine is looking a bit rusty and rather than getting it powder coated i was hoping to get one that doesnt rust!
cheers

Title: Re: fzs600 torque arm upgrade?
Post by: andy352299 on 16 July 2012, 08:32:13 pm

i have fitted an aluminium one with holes in it i think it came from a thunderace i beleive the trx850 one is also a straight swap

Title: Re: fzs600 torque arm upgrade?
Post by: markbubble on 16 July 2012, 08:43:39 pm

thanks for that,i l have a look on fleabay then
cheers mark

Title: Re: fzs600 torque arm upgrade?
Post by: DryRob on 16 July 2012, 10:22:24 pm

I've got a spare alloy torque arm like the one mentioned above, it's off the 1000 so is a bit longer than the standard but apparently fits and will just push your caliper round.
 
£5 plus postage and it's yours.

Title: Re: fzs600 torque arm upgrade?
Post by: markbubble on 17 July 2012, 06:24:19 am

that be great thanks,can i pay you with paypal? if so let me know total inc post and your paypal address so i can sent you the dosh
cheers mark

Title: Re: fzs600 torque arm upgrade?
Post by: DryRob on 17 July 2012, 09:58:58 am

Righto, here's what someone in the know says about using an FZS1000 arm http://foc-u.co.uk/index.php/topic,1317.msg9289.html#msg9289 (http://foc-u.co.uk/index.php/topic,1317.msg9289.html#msg9289)
 
If you still want it PM me your address and I'll send you the details, is 2nd class recorded alright?

Title: Re: fzs600 torque arm upgrade?
Post by: Dunky on 17 July 2012, 09:54:26 pm

Quote from: DryRob on 16 July 2012, 10:22:24 pm

I've got a spare alloy torque arm like the one mentioned above, it's off the 1000 so is a bit longer than the standard but apparently fits and will just push your caliper round.
 
£5 plus postage and it's yours.

As been said before I can confirm it will fit as I have one on my 600 it will just push your caliper/mounting bracket slightly round no problems though.
 
Dunky...........