Fazer Owners Club - Unofficial
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: mechanical music on 23 June 2023, 07:56:53 pm
-
why does the 3rd cylinder show low compression (70 psi) and the others are good (200-210 psi) on 2 different mk1 600 fzs engines all are cold readings as engines are not in bikes
-
put a bit of oil in the cylinder to see if its a sticky/knackered ring.
Could be dirt/crap stopping one of the valves sealing properly too.
-
It could also be you've got a valve/s not fully seating.
-
for me its cylinder 4 is really low, I suspect rings are worn but I wont bother replacing the pistons until winter