Fazer Owners Club - Unofficial
Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: Kenbob on 19 November 2020, 04:38:58 pm
-
hi all.
Quick question.
Should I coat new brake pad retaining pins with a thin film of worth’s brake paste or just the ends that are in the Caliper.
-
The only grease I use is a little red rubber grease when cleaning/replacing brake pistons/seals. No need for any grease or lubricants anywhere else.
-
Everyone to his own I've always put a bit on the pins just because the pads move along them,it might not do anything but I've done it for years now,it's probably a habit. ;)
-
same here, a thin film of copper grease on the pins.
-
Yep, me too. Use the same high melting point copper grease that I use on the exup valve. Some on the back of the pads as well.
-
I used to do the same but stopped using copper grease 2-3 years ago and it is so much easier to keep the callipers and pads clean and working well. I found that copper grease just attracts all sorts of grit and crap turning into grinding paste and for no real benefit. From what I remember, there is nothing in the service manual about using grease anywhere on the pads or pins.
-
A rub with copper grease stops them corroding and makes them much easier to remove next time.
-
I’ve got titanium pins in the front and OEM pins in the rear. No rust or corrosion on either. Regular cleaning and maintenance is the key.
-
Thanks for the replies.
Blue spot calipers are great calipers and I have only ever had one seize up on me despite my lack of brake maintenance and riding all year round.
I recently saw a delboy video where he shows caliper maintenance so I thought before this winter really sets in with the gritters out and about I would treat said calipers to new pad pins all round and a good wash.
Feeling guilty about my Caliper abuse.
-
Delboy’s videos are good for entertainment value, but that’s about all....
-
Where did you get the titanium pins from please?
-
Delboy’s videos are good for entertainment value, but that’s about all....
+that one :lol
-
Where did you get the titanium pins from please?
https://www.racefasteners.co.uk/product-page/yamaha-r1-titanium-front-brake-retaining-pad-pins-98-06 (https://www.racefasteners.co.uk/product-page/yamaha-r1-titanium-front-brake-retaining-pad-pins-98-06)
-
Where did you get the titanium pins from please?
https://www.racefasteners.co.uk/product-page/yamaha-r1-titanium-front-brake-retaining-pad-pins-98-06 (https://www.racefasteners.co.uk/product-page/yamaha-r1-titanium-front-brake-retaining-pad-pins-98-06)
Many thanks👍