Fazer Owners Club - Unofficial
Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: fatbloke62 on 24 July 2020, 03:05:26 pm
-
Hi ,i know the renthal 758 bars seem to be the most popular choice for the gen1, 1000 , has anyone fitted 754 bars ? , are there any issues with these regarding cable and brake line length or any fouling on the fairing
-
754s on mine which fit fine with standard length cables / hoses. I have GTYR risers though which are a bit lower than standard.
-
Cheers trebus ,its time for me to go slightly higher for the ride comfort
-
I’ll try and take a picture tomorrow.
-
Cheers trebus ,its time for me to go slightly higher for the ride comfort
If you're happy with the hand position on your current bars, why not just get a set of bar risers. I'd of thought 754's on stock risers would have made things a bit tight wiring harness wise, bearing in mind they're wider than stock and 35mm higher than 758's. Just a thought.
-
Pictures as promised 🙂
-
With 754s, the control cables will all stretch ok but the standard length brake hose setup might not be quite long enough. I had one inch longer braided lines which reached the M/C fine, not sure it would have with standard length hoses.
-
Thanks for the info and replies guy's , I never considered bar risers :groan