old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: benny3008 on 22 September 2019, 10:16:18 pm

Title: Fitting Koso clocks
Post by: benny3008 on 22 September 2019, 10:16:18 pm

Has anyone fitted a koso to a 2003 fazer who could give me some guidance on the wiring please? I’ve done all the wires for lighting, fuel etc. but not sure where the brown and red wire from koso should be connected to on the bikes wiring. I have pictures of wiring diagram and koso instructions if someone cane make more sense of it than me.

Title: Re: Fitting Koso clocks
Post by: benny3008 on 22 September 2019, 10:19:39 pm

Wiring diagram

Title: Re: Fitting Koso clocks
Post by: Farmboy81 on 24 September 2019, 03:39:57 pm

I might be missing something, but it looks like it goes to the Oil level sensor?

Title: Re: Fitting Koso clocks
Post by: schlumpf on 24 September 2019, 04:31:40 pm

Which type?I only have the RX1N data, maybe it's similar..http://cvieth.bplaced.net/bilder/motorrad/koso/RX1N_Steckerbelegung.JPG (http://cvieth.bplaced.net/bilder/motorrad/koso/RX1N_Steckerbelegung.JPG)
Sorry for the german naming in the picture.
(take care, "Tacho" is the german naming for the speed signal, "Drehzahl" is RPM)

Title: Re: Fitting Koso clocks
Post by: benny3008 on 24 September 2019, 11:07:11 pm

Quote from: Farmboy81 on 24 September 2019, 03:39:57 pm

I might be missing something, but it looks like it goes to the Oil level sensor?

Sorry, worded it incorrect, I should have said brown wire and red wire. 2 separate wires, the ones for power from koso wiring side.

Title: Re: Fitting Koso clocks
Post by: unfazed on 25 September 2019, 02:07:57 pm

Where is the Koso diagram, the one you posted is the fazer diagram

Title: Re: Fitting Koso clocks
Post by: benny3008 on 25 September 2019, 07:33:28 pm

Sorry it wouldn’t let me upload as file too large but I’ve sorted now anyway. Thanks for replies. 😁