old - Fazer Owners Club - old
Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: kerb on 07 April 2012, 11:59:33 am
-
Hi All
looking for a bit of help , i recently bought 03 fazer thou
so i was getting the error code for exup valve when ignition turned on ( rev counter going to 700rpm)
so found that exup valve was seized
so i striped it down and greased it all up now moving freely with hand
but when i tightened up all bolts to torque setting found that valve was very hard to move
so i took it out again i found that the spacer was missing
( see spacer on this pic, red arrow pointing to it in pic r/h top )
http://www.cartestsoftware.com/fz1/images/exupmaintenance05.jpg (http://www.cartestsoftware.com/fz1/images/exupmaintenance05.jpg)
and first part on left in this pic http://www.cartestsoftware.com/fz1/images/exupmaintenance04.jpg (http://www.cartestsoftware.com/fz1/images/exupmaintenance04.jpg)
so i want to make a spacer for it
so my Questions are
is this spacer the same diamater as the bushing thats inside it
what i mean is , is the outer diamater larger than the bushing thats inside it
( this bushin doesnt normaly come out when valave removed its not in any pics
thanks for any info kerb
-
heres a parts diagram
http://www.oemmotorparts.com/oem5.asp?M=Yamaha&T=FZS (http://www.oemmotorparts.com/oem5.asp?M=Yamaha&T=FZS) FAZER 1000&Y=2003&L=YA-FZS-FAZER-1000&O=EXHAUST SYSTEM&F=YA-FZS-FAZER-1000_al&L2=YA-FZS-FAZER-1000_al
the inside bushing is no.9
and spacer im missing is no.13
but its about 50 quid postd to me
-
http://www.yamahamotorcyclespares.co.uk/spares/epc2.asp?PageiD=12&modelID=9753&m=YAMAHA+FZS1000+FAZER+2002++2002+EXHAUST&uID=0 (http://www.yamahamotorcyclespares.co.uk/spares/epc2.asp?PageiD=12&modelID=9753&m=YAMAHA+FZS1000+FAZER+2002++2002+EXHAUST&uID=0)
can't read the drawing in your post but you can buy the part online here.
-
[url]http://www.yamahamotorcyclespares.co.uk/spares/epc2.asp?PageiD=12&modelID=9753&m=YAMAHA+FZS1000+FAZER+2002++2002+EXHAUST&uID=0[/url] ([url]http://www.yamahamotorcyclespares.co.uk/spares/epc2.asp?PageiD=12&modelID=9753&m=YAMAHA+FZS1000+FAZER+2002++2002+EXHAUST&uID=0[/url])
can't read the drawing in your post but you can buy the part online here.
thas the part alright , but its still 35 pound posted to me but thanks for info
-
bump :D
-
I've just stripped mine out this afternoon :)
The spacer is 15mm outside diameter and 4mm thick and is made from stainless I think as its not magnetic!
Check carefully inside the exhaust because the first time I stripped mine out I had the same thing and thought it was missing but on closer inspection I found it inside. It had dropped off when I pulled the valve out.
After I had found it I struggled a bit to get it back and that is how I know its not magnetic!
If you don't find it I would check the diagram again I think its the bush that's £35 not the spacer!
Good luck!
-
I've just stripped mine out this afternoon :)
The spacer is 15mm outside diameter and 4mm thick and is made from stainless I think as its not magnetic!
Check carefully inside the exhaust because the first time I stripped mine out I had the same thing and thought it was missing but on closer inspection I found it inside. It had dropped off when I pulled the valve out.
After I had found it I struggled a bit to get it back and that is how I know its not magnetic!
If you don't find it I would check the diagram again I think its the bush that's £35 not the spacer!
Good luck!
cheers Joe that's a great help
i will check this out tomorrow
the reason the spacer is 35 pounds to me is cause I'm including postage to ireland
as you say maybe its inside cause i just stuck a long magnet in there ( thinkin it was magnetic )
i will report back
cheers kerb