Fazer Owners Club - Unofficial
Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: FazerSimon on 24 January 2019, 06:09:24 pm
-
What are the two bolts on the opposite side of the exhaust from the EXUP cover-plate for?
They are located behind where the internal bush of the EXUP valve is situated.
(http://uploads.tapatalk-cdn.com/20160407/9dc86351e03d82faa9d37a286c07a896.jpg)
Thanks
Simon.
-
More importantly, you seem to have dripped black paint on your exhaust!!
-
Daft as it sounds, the bolts are to hold the cover plate and that's all. :)
-
Ever wondered why your post got 109 views before any input?.
-
I must say I thought these cap screws were simply blanking off two access points so that you could put a pin punch in there to drift out the bush supporting the end of the valve if it needed replaced. I did not think there was a blanking plate on there.
-
I must say I thought these cap screws were simply blanking off two access points so that you could put a pin punch in there to drift out the bush supporting the end of the valve if it needed replaced. I did not think there was a blanking plate on there.
I think you're right. :)
I've never removed them on my bike so assumed that it was a cover plate, too.
Access to drift out the inner bush makes perfect sense.
:)