old - Fazer Owners Club - old
General => General => Topic started by: wraith600 on 21 September 2011, 07:43:32 am
-
just looking through hoot poop and see this
http://www.foc-u.co.uk/wiki/index.php?title=Blue_Dot_Calipers_on_Rear_(600s_only) (http://www.foc-u.co.uk/wiki/index.php?title=Blue_Dot_Calipers_on_Rear_(600s_only))
it's wrong they will fit you just need to file a small section of the mount bracket off and i mean a small amount it will not affect the strength of the bracket i ran one on the back of my fazer for over 6 years ;)
-
I depends which blue spot caliper it has to be from a fazer thou, which again is not the same as the R1 R6 or XJR so as you say it needs a slight amout removing, but care must be taken on which blue spot you buy
-
If you can provide more details it could be added to that page.
-
Deefer says my post should give the right info, so people dont assume that "blue dot" will fit regardless
-
The FZS1000 Gen1 rear caliper is the the only one that fits the FZS600.
Like stated its only a small amount of filling to the hanger and it fits fine.
Works great, looks great especially with the FZS1000 torque arm.
-
all i got now are some photos as ive changed the hole back end to a mille set up ;) (http://www.foc-u.co.uk/smf/<a href="http://s1124.photobucket.com/albums/l568/wraith600/?action-view&current=DSC00003.jpg" target="_blank"><img src="http://i1124.photobucket.com/albums/l568/wraith600/DSC00003.jpg" border="0" alt="stock swinger performance racing parts pipe"></a>)(http://www.foc-u.co.uk/smf/<a href="http://s1124.photobucket.com/albums/l568/wraith600/?action-view&current=Absol000.jpg" target="_blank"><img src="http://i1124.photobucket.com/albums/l568/wraith600/Absol000.jpg" border="0" alt="stock swinger micron"></a>)