old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: deeteefifty on 26 August 2018, 07:42:48 pm

Title: Breather?
Post by: deeteefifty on 26 August 2018, 07:42:48 pm

Hello, I removed the carburettors to free off a seized tick over adjuster and on strip down noticed the item marked with a green arrow, should connect somewhere or does it vents to atmosphere?

Title: Re: Breather?
Post by: bandit on 26 August 2018, 08:09:44 pm

It vents to the atmosphere..(http://foc-u.co.uk/Smileys/efocicon/smile.gif)

Title: Re: Breather?
Post by: deeteefifty on 26 August 2018, 08:42:52 pm

Ta very much bandit for your quick reply👍

Title: Re: Breather?
Post by: Fazerider on 27 August 2018, 11:28:55 am

As Bandit says, it doesn’t attach to anything else.
It looks twisted out of position in your photo though, it normally faces backwards: which might give that wiring it’s pressing against a bit more room.

Title: Re: Breather?
Post by: deeteefifty on 27 August 2018, 11:43:03 am

Ta fazerider. I've a bit re routing to do, the clutch cable has a sharp bend on its way from the frame top tube then behind the side cover, but maybe there's no choice with that one.

Title: Re: Breather?
Post by: Fazerider on 27 August 2018, 11:04:57 pm

If you think a previous owner may have messed things up there’s a diagram for cable routing in the manual (available in the downloads section).

Title: Re: Breather?
Post by: deeteefifty on 28 August 2018, 06:50:33 am

Thanks, found it and things aren't too far off. The tight bend in the clutch cable from frame top tube to casing looked suspicious but surprisingly this matched with the diagram🤔