old - Fazer Owners Club - old
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: psyfi_1 on 05 May 2018, 06:02:56 pm
-
so cleaned bowls out and blew all the jet holes clear and put everything back together set the pilot ifle screws to two turns and then rebuilt
but now shes not starting she turns over but doesnt start and maybe third try in pops/ backfires
-
though i dont know if i left it long enough for the float bowls to fill i will try again in a bit
-
the pump will only prime for 5 seconds when you switch it on so switch it on an off till the pump stops then you no the carbs are full
-
yeh had the coil leads swapped over.......... but cylinders three and four still arent firing....... :'(
-
what way have you got them plugged in
-
ht leads are set to 1-4 2-3