old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: MedLey on 04 January 2018, 07:55:44 pm

Title: Aftermarket handlebars FZ1 gen2
Post by: MedLey on 04 January 2018, 07:55:44 pm

Hi guys, who have fitted aftermarked handle bars on yours fz1 ? i need to know wjat was the width of handlebars, and did you modified clutch/throttle cables, and wires?

Title: Re: Aftermarket handlebars FZ1 gen2
Post by: Dudeofrude on 04 January 2018, 08:37:06 pm

I've got rizoma bars on mine wig the matching riser. They are about 2 inches lower than the originals so my brake lines have quite a bit of slack in them and just adjusted the clutch cable accordingly. I could do with replacing the brake lines for shorter ones but generally just can't be bothered haha

Title: Re: Aftermarket handlebars FZ1 gen2
Post by: Dudeofrude on 04 January 2018, 08:39:13 pm

http://www.rizoma.com/universal/handlebars-clip-on-bars/ma005-008-006-009-011/en?MOTO=50412423-50462991-R (http://www.rizoma.com/universal/handlebars-clip-on-bars/ma005-008-006-009-011/en?MOTO=50412423-50462991-R)

These ones. All the specs (width etc) should be on there

Title: Re: Aftermarket handlebars FZ1 gen2
Post by: MedLey on 04 January 2018, 09:20:35 pm

oh, nice, so the 740mm width would be nice start, ok i will have it in my mind, that i can buy that kind of width handlebars, and dont have to be scared that cables will be too short :D

Title: Re: Aftermarket handlebars FZ1 gen2
Post by: MedLey on 12 January 2018, 01:16:30 pm

So thats it? everyone is riding with standart bars? :)

Title: Re: Aftermarket handlebars FZ1 gen2
Post by: brooker81 on 12 January 2018, 01:28:29 pm

I'm using rizoma bars as well with shorter venhill lines.

Title: Re: Aftermarket handlebars FZ1 gen2
Post by: Dudeofrude on 12 January 2018, 04:01:38 pm

Quote from: brooker81 on 12 January 2018, 01:28:29 pm

I'm using rizoma bars as well with shorter venhill lines.

Just out of interest did you measure and order the correct length or did you buy some for another bike ie R1, R6 etc etc?

Title: Re: Aftermarket handlebars FZ1 gen2
Post by: MedLey on 15 January 2018, 01:12:51 pm

Will it fit ? https://road.renthal.com/shop/road-products/road-handlebars/road-se-bars?product_id=2017 no need extend brake lines?? its just 2cmm longer than standar, or 1 cm from one side and 1cm to toher :)

Title: Re: Aftermarket handlebars FZ1 gen2
Post by: Nemesis on 15 January 2018, 08:59:03 pm

I love the standard bars just right for me :lol

Title: Re: Aftermarket handlebars FZ1 gen2
Post by: brooker81 on 18 January 2018, 08:47:29 am

I had the lines made to order mate.